LeMond Bicycles?
#1
Senior Member
Thread Starter
Join Date: Aug 2006
Location: Portland OR
Posts: 7,639
Bikes: 61 Bianchi Specialissima 71 Peugeot G50 7? P'geot PX10 74 Raleigh GranSport 75 P'geot UO8 78? Raleigh Team Pro 82 P'geot PSV 86 P'geot PX 91 Bridgestone MB0 92 B'stone XO1 97 Rans VRex 92 Cannondale R1000 94 B'stone MB5 97 Vitus 997
Mentioned: 146 Post(s)
Tagged: 0 Thread(s)
Quoted: 392 Post(s)
Likes: 0
Liked 49 Times
in
31 Posts
LeMond Bicycles?
Are LeMond bicycles considered C&V by most, or even some, of us? Or are they still just "old bikes"? Do you think they ever will become "classics"?
Any favorite models that you ride, or keep an eye out for? What is good or notable about them? How much are they worth, broadly speaking?
The materials used seem to have been all over the place - OCLV carbon fiber, True Temper, 853, aluminum - and there are so many models, that it is hard for me to form a view or sense of the marque.
Any favorite models that you ride, or keep an eye out for? What is good or notable about them? How much are they worth, broadly speaking?
The materials used seem to have been all over the place - OCLV carbon fiber, True Temper, 853, aluminum - and there are so many models, that it is hard for me to form a view or sense of the marque.
#3
Senior Member
Join Date: Jul 2009
Posts: 11,128
Bikes: 1986 Alan Record Carbonio, 1985 Vitus Plus Carbone 7, 1984 Peugeot PSV, 1972 Line Seeker, 1986(est.) Medici Aerodynamic (Project), 1985(est.) Peugeot PY10FC
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 150 Post(s)
Likes: 0
Liked 34 Times
in
27 Posts
I never owned one, but I bet they ride quite nice, especially as the champ had his name on them, so Greg must have made sure the bikes will not embarrass him.
But I do have to confess, that I don't find LeMond bikes very pretty. The typical yellow and black paint and graphic schemes on them just don't look very good or inspiring. Never mind the quite tacky looking "Hand Made" pantographing some of them had on the brake bridges. Yes, Peugeot had "Braise a le main" on their top tubes in the 80's, but it was only a decal....
But I do have to confess, that I don't find LeMond bikes very pretty. The typical yellow and black paint and graphic schemes on them just don't look very good or inspiring. Never mind the quite tacky looking "Hand Made" pantographing some of them had on the brake bridges. Yes, Peugeot had "Braise a le main" on their top tubes in the 80's, but it was only a decal....
#4
Senior Member
Thread Starter
Join Date: Aug 2006
Location: Portland OR
Posts: 7,639
Bikes: 61 Bianchi Specialissima 71 Peugeot G50 7? P'geot PX10 74 Raleigh GranSport 75 P'geot UO8 78? Raleigh Team Pro 82 P'geot PSV 86 P'geot PX 91 Bridgestone MB0 92 B'stone XO1 97 Rans VRex 92 Cannondale R1000 94 B'stone MB5 97 Vitus 997
Mentioned: 146 Post(s)
Tagged: 0 Thread(s)
Quoted: 392 Post(s)
Likes: 0
Liked 49 Times
in
31 Posts
I don't know about any of the 1980s or early 1990s LeMond bikes. I've never found any catalogs online and have only seen a handful of them posted here.
#5
Fat Guy on a Little Bike
Join Date: Jun 2008
Location: Philadelphia, PA
Posts: 15,944
Bikes: Two wheeled ones
Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 1254 Post(s)
Liked 345 Times
in
174 Posts
Most bikes here are not classic and some of the Lemonds might eventually qualify. I was very impressed with Poprad - nice OS, light steel and attractive.
Likes For KonAaron Snake:
#6
It's MY mountain
Join Date: Sep 2006
Location: Mt.Diablo
Posts: 10,002
Bikes: Klein, Merckx, Trek
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 4337 Post(s)
Liked 2,980 Times
in
1,617 Posts
Lemond bikes have a small but loyal following.
A Team Z Lemond would certainly draw admiring attention from collectors.
A Team Z Lemond would certainly draw admiring attention from collectors.
#7
Senior Member
Join Date: Aug 2009
Location: Berkeley, CA
Posts: 7,239
Bikes: '72 Cilo Pacer, '72 Gitane Gran Tourisme, '72 Peugeot PX10, '73 Speedwell Ti, '74 Peugeot UE-8, '75 Peugeot PR-10L, '80 Colnago Super, '85 De Rosa Pro, '86 Look Equipe 753, '86 Look KG86, '89 Parkpre Team, '90 Parkpre Team MTB, '90 Merlin
Mentioned: 87 Post(s)
Tagged: 0 Thread(s)
Quoted: 831 Post(s)
Liked 2,124 Times
in
554 Posts
The early Lemond bikes are certainly both classic & vintage IMO. There were Billato-made lugged steel frames with Columbus tubing and imported by Ten Speed Drive in the late 80s. Not sure exactly when they first appeared, but I'd guess around '87. There were also Lemond-branded TVT carbon bikes in the late 80s similar to the Looks used by the La Vie Claire team in '86-'87. I recently had the pleasure of meeting Ebay seller brev.gabriel (he was kind enough meet me for a local pick-up), and he showed up on a drool-worthy lugged Lemond with full C-record. Personally, I'm not drawn to the later TIG-welded Lemonds, but those who own(ed) them speak very highly of them.
#8
Banned
Join Date: Dec 2010
Location: West Coast of Wisconsin
Posts: 660
Bikes: 2011 Surly LHT 2005 LeMond Zurich
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have an '05 carbon/steel Zurich which basically is a Trek, I guess. I continue to casually look for a vintage Lemond since I'm proud to wear his name on my machine.
#9
Senior Member
Join Date: Dec 2008
Posts: 1,315
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 8 Times
in
7 Posts
Im thinking the best are the first ones made....they had a "team Lemond" thing going in the 80s. the best one was the team Lemond pro....as I recall...any of the older Lemond road bikes made by Della Santa are the best ones and the most desired by collectors. By the way...he was the last Tour de France winner that rode a bike with his name on the downtube....just like Hinault and Merckx before him
#11
Junior Member
Join Date: Jan 2013
Location: Ann Arbor, MI & Portland, OR
Posts: 21
Bikes: '84 Mercian King of Mercia, '78 Austro Daimler Inter 10 Mixte 650b Porteur Conversion, '73 Raleigh Competition, '51 La Perle (Formerly owned by Sheldon Brown, restoration ongoing), '60 or '62 Mercian King of Mercia (Frame and Fork work in progress)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The 2001 LeMond Zurich with Reynolds 853 Pro Team tubing was the first bike I ever fell in love with, at first from afar and then as my first nice bike. I saw it in my local bike shop when new, but as a penniless teen, could only afford to take home the brochure. While in college I scrounged enough money to buy one off of craigslist in 2005, in original kit. It was quick, comfortable, sprinted and climbed really well. I rode it for tens of thousands of miles, and really loved the ride. So much so that I convinced myself it fit, though it was clearly 3-4cm too small. Even so, after the Ultegra shifters started breaking down I upgraded just about everything, and got the weight down to 17lbs even. I rode it for another two years in that configuration and finally sold it after buying a proper C&V ride that fit me. I definitely have a soft spot for LeMond bikes, but as my tastes have gone farther and farther towards classic steel, I don't think I'd buy one of that same period today, even at a steal of a price. In short, great bikes and still very capable, but I don't think the Trek produced ones will ever attain classic status. They were, however, a great attempt to make US made, high performance steel bikes into credible competition for the growing wave of carbon fiber everything.
#12
Spin Forest! Spin!
Join Date: Sep 2007
Location: Arrid Zone-a
Posts: 5,956
Bikes: I used to have many. And I Will again.
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 11 Times
in
10 Posts
Lemond had two sources of titanium frames in the early 90s. Latter one was/should be Sandvik. I had a 93 Titanium DA, a Sandvik made bike.
And a Trek era 97 Zurich frame of 853. These LeTreks were still considered very good riders.
And a Trek era 97 Zurich frame of 853. These LeTreks were still considered very good riders.
#13
Fat Guy on a Little Bike
Join Date: Jun 2008
Location: Philadelphia, PA
Posts: 15,944
Bikes: Two wheeled ones
Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 1254 Post(s)
Liked 345 Times
in
174 Posts
Litespeed, Sandvik and Trek are confirmed to have made production ti Lemonds at various stages. Merlin made SOME team Lemonds, how many is up for debate. Sampson might have made some as well.
#14
Hoards Thumbshifters
Join Date: Jul 2010
Location: Signal Mountain, TN
Posts: 1,156
Bikes: '23 Black Mtn MC, '87 Bruce Gordon Chinook, '08 Jamis Aurora, '86 Trek 560, '97 Mongoose Rockadile, & '91 Trek 750
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 246 Post(s)
Liked 334 Times
in
192 Posts
Most of his road bikes have racing geometry, long top tubes, but if you are the type that likes Surly Crosschecks it is a similar feel, except much better. However Proprads and Wayzatas had some more sane geometry and are awesome feeling rides.
#16
Banned
Join Date: Aug 2013
Posts: 6,480
Mentioned: 93 Post(s)
Tagged: 0 Thread(s)
Quoted: 1361 Post(s)
Likes: 0
Liked 423 Times
in
282 Posts
Be like Greg
If anyone is looking to complete an early Lemond, I have an early to mid 1980's Avocet model 20 computer available. USA made 1st units.
Posted in the CV FS thread. Peace
https://www.bikeforums.net/showthread...lete-w-sensors
If anyone is looking to complete an early Lemond, I have an early to mid 1980's Avocet model 20 computer available. USA made 1st units.
Posted in the CV FS thread. Peace
https://www.bikeforums.net/showthread...lete-w-sensors
Last edited by crank_addict; 03-05-14 at 08:52 PM.
#17
No longer active
Join Date: May 2012
Posts: 1,001
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 89 Post(s)
Likes: 0
Liked 6 Times
in
6 Posts
I'd also have to agree that the early LeMonds from (from Greg's own label) are on the cusp of becomming 'classics.' Word of mouth is gradually gaining a few ears, and I've seen the prices gradully rise since the summer when I bought & restored mine.
So, if you're into collecting (or just looking for a fine ride), now is the time to find them. As an example, around here every few months or so, some guy who doesn't know any better puts a totally sweet early LeMond on our CL for around $200 - $300 with a listing like, "old bike." I'm sure that can't be unique, that it's likely the case everywhere, and that in five or six years such deals will be a thing if the past.
The later Trek-made 853 LeMonds are excellent bikes (as a Buenos Aires owner I'll admit I'm somewhat biased in my view); well-made, as far as TIG-welded frames go, and some of them- like the late '90s Zurich/ Maillot Jaunes & BA/ Alpe de Huez frames (and likely the Propad)- will be considered classics in maybe a decade or so. At the moment, they're still under the radar, in the shacow of some of LeMond's later & more confused designs. The Sarth was a return to form- and nice sunset for the Zurich's geometry, but not as well built; a 'classic' case of "too little, too late."
My Buenos Aires:
So, if you're into collecting (or just looking for a fine ride), now is the time to find them. As an example, around here every few months or so, some guy who doesn't know any better puts a totally sweet early LeMond on our CL for around $200 - $300 with a listing like, "old bike." I'm sure that can't be unique, that it's likely the case everywhere, and that in five or six years such deals will be a thing if the past.
The later Trek-made 853 LeMonds are excellent bikes (as a Buenos Aires owner I'll admit I'm somewhat biased in my view); well-made, as far as TIG-welded frames go, and some of them- like the late '90s Zurich/ Maillot Jaunes & BA/ Alpe de Huez frames (and likely the Propad)- will be considered classics in maybe a decade or so. At the moment, they're still under the radar, in the shacow of some of LeMond's later & more confused designs. The Sarth was a return to form- and nice sunset for the Zurich's geometry, but not as well built; a 'classic' case of "too little, too late."
My Buenos Aires:
#18
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,328
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3898 Post(s)
Liked 4,831 Times
in
2,229 Posts
Calfee made bikes from his 'CarbonFrames' era for Lemond. They were ridden in at least one TdF.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
#19
Senior Member
Join Date: Jan 2012
Location: Forksbent, MN
Posts: 3,190
Bikes: Yes
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 301 Post(s)
Likes: 0
Liked 15 Times
in
15 Posts
Parts shipped today to get this up and running. To my knowledge, after a fair amount of research including the dealer tech manual, all tubies on this one are from Reynolds, the 4 largest diameter ones are 853. Should work out pretty well...
853 Designer Select
The Poprad is built from round 853 Designer Select tubes. This tubeset combines an 853 main triangle with Reynolds 525 stays. 853 and 525 have the same modu- lus (stiffness), but 853 has a greater tensile strength. In the main triangle, the higher strength of 853 allows us to use thinner, lighter tubes. With the stays, there’s a limit on how thin the metal can be that’s not determined by strength, but weldable thickness.
#20
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,784
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3587 Post(s)
Liked 3,400 Times
in
1,934 Posts
#21
Crawlin' up, flyin' down
Join Date: Jan 2006
Location: Democratic Peoples' Republic of Berkeley
Posts: 5,651
Bikes: 1967 Paramount; 1982-ish Ron Cooper; 1978 Eisentraut "A"; two mid-1960s Cinelli Speciale Corsas; and others in various stages of non-rideability.
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 1025 Post(s)
Liked 2,525 Times
in
1,055 Posts
#22
Senior Member
Join Date: May 2005
Location: Los Angeles
Posts: 909
Bikes: Casati, Look, Torelli, Ridley, and a bunch of steel bikes from the 80s and the 90s..
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
John,
Are you looking for one? I raced a Zurich from the early 90s (Tig Reynolds tubing )for a season. Its a great riding bike, but seem to be a bit slow compared to the Cannondale Cat 3 our club was providing us for next to nothing. I did many long rides on the LeMond. I didn't care if it was a tad slower coming out of the corners (its really not that slow, by any means). You wouldn't be disappointed with one.
jeff
Are you looking for one? I raced a Zurich from the early 90s (Tig Reynolds tubing )for a season. Its a great riding bike, but seem to be a bit slow compared to the Cannondale Cat 3 our club was providing us for next to nothing. I did many long rides on the LeMond. I didn't care if it was a tad slower coming out of the corners (its really not that slow, by any means). You wouldn't be disappointed with one.
jeff
#23
Senior Member
Join Date: Aug 2009
Location: Berkeley, CA
Posts: 7,239
Bikes: '72 Cilo Pacer, '72 Gitane Gran Tourisme, '72 Peugeot PX10, '73 Speedwell Ti, '74 Peugeot UE-8, '75 Peugeot PR-10L, '80 Colnago Super, '85 De Rosa Pro, '86 Look Equipe 753, '86 Look KG86, '89 Parkpre Team, '90 Parkpre Team MTB, '90 Merlin
Mentioned: 87 Post(s)
Tagged: 0 Thread(s)
Quoted: 831 Post(s)
Liked 2,124 Times
in
554 Posts
Don't know about the price, but I wouldn't kick this Lemond out of my garage.
[h=2]LEMOND, Greg titanium frame set, 56cm - $1500 (berkeley)[/h]
Greg Lemond titanium frame set with Reynolds Ouzo Pro all carbon fiber fork...
Crane Creek headset...
previously owned by Greg...
given to me by Greg in 1993, ridden lightly by an old man...
56cm seat tube, 56cm top tube... braze on front derailleur mount...
please respond with a phone number...
interesting trades considered...
https://sfbay.craigslist.org/eby/bik/4362215242.html
[h=2]LEMOND, Greg titanium frame set, 56cm - $1500 (berkeley)[/h]
Greg Lemond titanium frame set with Reynolds Ouzo Pro all carbon fiber fork...
Crane Creek headset...
previously owned by Greg...
given to me by Greg in 1993, ridden lightly by an old man...
56cm seat tube, 56cm top tube... braze on front derailleur mount...
please respond with a phone number...
interesting trades considered...
- do NOT contact me with unsolicited services or offers
https://sfbay.craigslist.org/eby/bik/4362215242.html
#25
Senior Member
Join Date: Jan 2013
Posts: 2,678
Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 569 Post(s)
Liked 581 Times
in
409 Posts
I have a '98 Zurich that I love for three reasons; it was out in the AZ sun for years so the paint is shot, even lost most of the word "Ultegra" on the front break so it looks vintage, I use it as my in town beater because it is unlikely to draw a thief's attention, it is a fabulous ride.