Requesting upclose pictures of the Giant TCR (disk preferred)
#1
Senior Member
Thread Starter
Join Date: Jan 2005
Posts: 58
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Requesting upclose pictures of the Giant TCR (disk preferred)
I am getting into building a bike from the frame up my self for the first time. I have decided to go with the 2020 Giant TCR advanced pro disk frame. Being that this is the first time I am building a bike, I would like to make sure I know where all the cable exit/entry grommets go. I can see where most of them go because of their shape but some of them I am not sure. Could someone post (pm or email) some pictures of the front derailleur cable exit point, rear derailleur cable exit point, and the rear caliper hose entry and exit point? I would very much appreciate it. I could go to a LBS that carries Giant bikes as a last resort. Thanks in advance for any help.
#2
Senior Member
Join Date: Aug 2019
Location: Québec, Canada
Posts: 2,112
Bikes: SL8 Pro, TCR beater
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 988 Post(s)
Liked 584 Times
in
439 Posts
I'll do it when I get home after work if no pictures have already been provided.
If you don't mind my questions/comments:
-The Advanced SL frameset is 500$ more expensive than the ''regular'' composite one (Advanced). Getting the high end carbon fibre composite would definitively be worth it at that price IMO.
-Is there any specific reason why you want to build one instead of buying a complete bike? You know it'll cost you over twice the $ for basically the same thing, right?
Please do also post pictures of your build once started! This will be interesting to follow.
If you don't mind my questions/comments:
-The Advanced SL frameset is 500$ more expensive than the ''regular'' composite one (Advanced). Getting the high end carbon fibre composite would definitively be worth it at that price IMO.
-Is there any specific reason why you want to build one instead of buying a complete bike? You know it'll cost you over twice the $ for basically the same thing, right?
Please do also post pictures of your build once started! This will be interesting to follow.
#3
Senior Member
Thread Starter
Join Date: Jan 2005
Posts: 58
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thank you. I guess, I was buying with my heart rather then my brain. I wanted the experience of building a new bike but I know that I will ultimately be spending more money going this route and that's why I went with Advanced Pro then Advanced SL. I also really like the 2020 chameleon color on the Advanced pro .
Also from what I understand, I thought the Advanced SL and Advanced Pro had the same frame with the exception of the integrated seatpost on the SL.
Looking forward to your pictures!
Also from what I understand, I thought the Advanced SL and Advanced Pro had the same frame with the exception of the integrated seatpost on the SL.
Looking forward to your pictures!
Last edited by kevinf1990; 10-04-19 at 11:18 AM.
#4
Senior Member
Join Date: Aug 2019
Location: Québec, Canada
Posts: 2,112
Bikes: SL8 Pro, TCR beater
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 988 Post(s)
Liked 584 Times
in
439 Posts
Not at all! Advanced SL frameset = Whole frame & forks made out of Giant's premium (Advanced SL) composite.
The frame & fork in the ''Advanced Pro'' lineup uses Giant's lower-end (Advanced) composite - the same that's used in the ''Advanced'' lineup. The difference between these two is simply better components (such as Advanced SL Stem & Bars).
Here are a few pictures. I hope they'll be useful!
The frame & fork in the ''Advanced Pro'' lineup uses Giant's lower-end (Advanced) composite - the same that's used in the ''Advanced'' lineup. The difference between these two is simply better components (such as Advanced SL Stem & Bars).
Here are a few pictures. I hope they'll be useful!
Last edited by eduskator; 10-04-19 at 02:58 PM.
#5
Senior Member
Thread Starter
Join Date: Jan 2005
Posts: 58
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks a lot. Didn't realize you were running Di2. I am planning to go with mechanical shifting. But still not sure yet. Anyways, those pictures are helpful.
Also, it's too bad Giant didn't hide the front brake hose inside the fork. I think it would look a lot better and cleaner.
Also, it's too bad Giant didn't hide the front brake hose inside the fork. I think it would look a lot better and cleaner.
Last edited by kevinf1990; 10-04-19 at 07:48 PM.
#6
Senior Member
Join Date: Oct 2009
Posts: 2,853
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 1067 Post(s)
Likes: 0
Liked 259 Times
in
153 Posts
Thanks a lot. Didn't realize you were running Di2. I am planning to go with mechanical shifting. But still not sure yet. Anyways, those pictures are helpful.
Also, it's too bad Giant didn't hide the front brake hose inside the fork. I think it would look a lot better and cleaner.
Also, it's too bad Giant didn't hide the front brake hose inside the fork. I think it would look a lot better and cleaner.
"Eduskator" is correct about the frames.
The SL is a different carbon and lay up plus ISP.
The Advanced frames are the same through the range but the "Pro" has the oversize 1.25" fork steerer.
#7
Senior Member
Thread Starter
Join Date: Jan 2005
Posts: 58
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
sorry you're right, I was confusing with the advanced. Advance pro has the carbon steerer. Anyways, I think this frame will be good for now.
#8
Senior Member
Join Date: Aug 2019
Location: Québec, Canada
Posts: 2,112
Bikes: SL8 Pro, TCR beater
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 988 Post(s)
Liked 584 Times
in
439 Posts
Thanks a lot. Didn't realize you were running Di2. I am planning to go with mechanical shifting. But still not sure yet. Anyways, those pictures are helpful.
Also, it's too bad Giant didn't hide the front brake hose inside the fork. I think it would look a lot better and cleaner.
Also, it's too bad Giant didn't hide the front brake hose inside the fork. I think it would look a lot better and cleaner.
As for the DI2, it is definitively worth it. Carbon Fibre wheels as well. You'll however realise that your custom built will cost you near to twice the price of a complete one (if you put equivalent components).
My next bike will be a custom built as well (well, sort of). I'll buy an Advanced SL frameset, transfer all my current components on it & sell the used Adv. Pro frame.