1 Arm Cycling
#1
Junior Member
Thread Starter
Join Date: Nov 2018
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
1 Arm Cycling
HI All
The purpose for starting this thread is to get some guidance on devices/tips for adapting to cycle with 1 arm (if the subject wasn't clear enough).
My case in particular, is a left arm amputation above the elbow.
I apologize in advance if there is an existing thread that already speaks to this and if there is please direct me to it, if there isn't then perhaps this thread can be hijacked by anyone in similar circumstances who needs the advice or just a place to go to for the best solution to their needs.
My story is simple... I was in a motorbike accident and lost my arm left arm. I feel that I can do anything I put my mind to and cycling is the next challenge for me.
I just got myself a road bike and rode around the block a few times to see if I am able to cycle.
I find the keeping the bike straight might be somewhat challenging and anticipate that climbing a hill will be hard.
I feel that I need a device that can attach to the left handlebar and connect to my arm so that i can get enough power and balance into the bike.
Also all the advice for a new cyclist with 1 arm will be great.
Thanks in advance for any input towards a better ride
The purpose for starting this thread is to get some guidance on devices/tips for adapting to cycle with 1 arm (if the subject wasn't clear enough).
My case in particular, is a left arm amputation above the elbow.
I apologize in advance if there is an existing thread that already speaks to this and if there is please direct me to it, if there isn't then perhaps this thread can be hijacked by anyone in similar circumstances who needs the advice or just a place to go to for the best solution to their needs.
My story is simple... I was in a motorbike accident and lost my arm left arm. I feel that I can do anything I put my mind to and cycling is the next challenge for me.
I just got myself a road bike and rode around the block a few times to see if I am able to cycle.
I find the keeping the bike straight might be somewhat challenging and anticipate that climbing a hill will be hard.
I feel that I need a device that can attach to the left handlebar and connect to my arm so that i can get enough power and balance into the bike.
Also all the advice for a new cyclist with 1 arm will be great.
Thanks in advance for any input towards a better ride
#3
Not lost wanderer.
Join Date: Jan 2013
Location: Lititz, Pa
Posts: 3,325
Bikes: In USA; 73 Raleigh Super Course dingle speed, 72 Raleigh Gran Sport SS, 72 Geoffry Butler, 81 Centurion Pro-Tour, 74 Gugie Grandier Sportier
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 885 Post(s)
Liked 989 Times
in
521 Posts
My Daughter is one handed, congenital short arm just below the elbow. I setup her bike like this with an extended MTB bar end on the off side.
__________________
Cambodia bikes, Bridgestone SRAM 2 speed, 2012 Fuji Stratos...
Cambodia bikes, Bridgestone SRAM 2 speed, 2012 Fuji Stratos...
#4
hoppipola
Join Date: Aug 2016
Posts: 423
Bikes: fausto coppi
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 512 Post(s)
Liked 227 Times
in
163 Posts
When you turn left or right, it's your body that is leaning, so don't forget that you need something to help your chest stay "fixed" to the bike otherwise it would be too much on your right hand.
When you brake or climb, a one sided device can create an imbalance and put more effort on your right arm.
So maybe some kind of "saddle" to hold your chest can help alleviate the weight of your upper body from the handlebars and that could make it easier to steer.
BTW, have you considered riding a recumbent bicycle in the meanwhile ?
#5
Junior Member
Thread Starter
Join Date: Nov 2018
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Holytrousers, this is something that I hadnt thought of thank you.
When I get to the point of making an adaptive device I will definitely take this into consideration.
The idea of riding a recumbent bike scares me so I haven't given it any thought tbh.
I'm happy with challenging myself but want to be able to keep up with all the other riders and not keep anyone behind, so me getting a device that would help me push faster and harder would really help.
Having said this I do have an update:
I went on my 1st ride and it wasn't terrible.
I found my arm constantly activated and as I had less time to relax it.
I managed to get someone to move my gears and brakes to the right side, so I have both on 1 side.
I'll send a pic of the modification to my gears... it might help.
When I get to the point of making an adaptive device I will definitely take this into consideration.
The idea of riding a recumbent bike scares me so I haven't given it any thought tbh.
I'm happy with challenging myself but want to be able to keep up with all the other riders and not keep anyone behind, so me getting a device that would help me push faster and harder would really help.
Having said this I do have an update:
I went on my 1st ride and it wasn't terrible.
I found my arm constantly activated and as I had less time to relax it.
I managed to get someone to move my gears and brakes to the right side, so I have both on 1 side.
I'll send a pic of the modification to my gears... it might help.
#6
Newbie
Join Date: Mar 2009
Location: Athens, Greece
Posts: 35
Bikes: Trek Fuel EX7 (09), Diamond Back Axis TT (94)
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 6 Times
in
5 Posts
Been riding since my brachial plexus injury paralysed my left arm in 2003 (motorbike also)
Tried sooooooooooooo many different systems and configurations
After 15 years of 1 armed cycling i've not found a way to get stable and comfortable with drop bars
For my MTB i've tried linked brakes, only having a front brake, even tried having a brake on the rear of my saddle so i brake with my ass.
For off-road or slippy conditions on the road this is the best system i've found
For stability
We just have to face facts that we can't honk or pull on the bars like we did, we have to concentrate on spinning and having a smooth seated position
I have tried attaching my paralysed arm to the bars with everything from velcro to a SPD clip system, i crashed every time, ending up with a broken arm
Problem is, if you attach an arm without having grip it severely limits you in your mobility around the bike when riding
Even something as simple as taking a drink will mean your good arm is not controlling your direction, so you're controlling 100% your stability with bad arm
Saying that i use a Hopey steering damper, it does help a little bit
It's not very consistent though
If you start off the ride with it tight, after 10mins it starts to loosen up
They're also ridiculously expensive for what they are, i was quoted $80 to refurbish my old one
After i've said alllllllllllllll of that i have seen people with 1 arm using attachments and they say they like it, there is also a guy on here that rides drops with 1 arm
It's really just a case of trying a few things till you find something you're more comfortable with
Whatever you do it's going to be a compromise though
I've seen many people expecting to come back and have the same control as they had with 2 arms, they start off full of "can do anything" enthusiasm only to disappear after a few months disappointed.
For me i used to like jumps and technical stuff (i mostly ride MTB), i've just had to face facts i can't wheelie off or over obstacles consistently enough to be safe.
So i'm more XC than enduro type riding now, still love it mind
Tried sooooooooooooo many different systems and configurations
After 15 years of 1 armed cycling i've not found a way to get stable and comfortable with drop bars
For my MTB i've tried linked brakes, only having a front brake, even tried having a brake on the rear of my saddle so i brake with my ass.
For off-road or slippy conditions on the road this is the best system i've found
For stability
We just have to face facts that we can't honk or pull on the bars like we did, we have to concentrate on spinning and having a smooth seated position
I have tried attaching my paralysed arm to the bars with everything from velcro to a SPD clip system, i crashed every time, ending up with a broken arm
Problem is, if you attach an arm without having grip it severely limits you in your mobility around the bike when riding
Even something as simple as taking a drink will mean your good arm is not controlling your direction, so you're controlling 100% your stability with bad arm
Saying that i use a Hopey steering damper, it does help a little bit
It's not very consistent though
If you start off the ride with it tight, after 10mins it starts to loosen up
They're also ridiculously expensive for what they are, i was quoted $80 to refurbish my old one
After i've said alllllllllllllll of that i have seen people with 1 arm using attachments and they say they like it, there is also a guy on here that rides drops with 1 arm
It's really just a case of trying a few things till you find something you're more comfortable with
Whatever you do it's going to be a compromise though
I've seen many people expecting to come back and have the same control as they had with 2 arms, they start off full of "can do anything" enthusiasm only to disappear after a few months disappointed.
For me i used to like jumps and technical stuff (i mostly ride MTB), i've just had to face facts i can't wheelie off or over obstacles consistently enough to be safe.
So i'm more XC than enduro type riding now, still love it mind
#7
Senior Member
Join Date: Dec 2007
Posts: 832
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 90 Post(s)
Likes: 0
Liked 18 Times
in
16 Posts
like i said not a real serious bike, but i have seen more serious foot forward examples. you could ask on bentrider online for more knowledgeable answers.
Last edited by Philphine; 11-26-18 at 09:53 AM.
#8
Junior Member
Thread Starter
Join Date: Nov 2018
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
@gixer by your username I don't need to ask which bike you came short on, but respect for not wasting any time.
You have a lot of years experience with 1 arm but what I really like is your braking setup... simple and easy.
The sad part is that everything in the sport is pricey so i'll have to wait and see what the prosthetist comes up with (which might take very long).
You have a lot of years experience with 1 arm but what I really like is your braking setup... simple and easy.
The sad part is that everything in the sport is pricey so i'll have to wait and see what the prosthetist comes up with (which might take very long).
#9
Wood Licker
Join Date: Apr 2002
Location: Whistler,BC
Posts: 16,966
Bikes: Trek Fuel EX 8 27.5 +, 2002 Transition Dirtbag, Kona Roast 2002
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 23 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
HI All
The purpose for starting this thread is to get some guidance on devices/tips for adapting to cycle with 1 arm (if the subject wasn't clear enough).
My case in particular, is a left arm amputation above the elbow.
I apologize in advance if there is an existing thread that already speaks to this and if there is please direct me to it, if there isn't then perhaps this thread can be hijacked by anyone in similar circumstances who needs the advice or just a place to go to for the best solution to their needs.
My story is simple... I was in a motorbike accident and lost my arm left arm. I feel that I can do anything I put my mind to and cycling is the next challenge for me.
I just got myself a road bike and rode around the block a few times to see if I am able to cycle.
I find the keeping the bike straight might be somewhat challenging and anticipate that climbing a hill will be hard.
I feel that I need a device that can attach to the left handlebar and connect to my arm so that i can get enough power and balance into the bike.
Also all the advice for a new cyclist with 1 arm will be great.
Thanks in advance for any input towards a better ride
The purpose for starting this thread is to get some guidance on devices/tips for adapting to cycle with 1 arm (if the subject wasn't clear enough).
My case in particular, is a left arm amputation above the elbow.
I apologize in advance if there is an existing thread that already speaks to this and if there is please direct me to it, if there isn't then perhaps this thread can be hijacked by anyone in similar circumstances who needs the advice or just a place to go to for the best solution to their needs.
My story is simple... I was in a motorbike accident and lost my arm left arm. I feel that I can do anything I put my mind to and cycling is the next challenge for me.
I just got myself a road bike and rode around the block a few times to see if I am able to cycle.
I find the keeping the bike straight might be somewhat challenging and anticipate that climbing a hill will be hard.
I feel that I need a device that can attach to the left handlebar and connect to my arm so that i can get enough power and balance into the bike.
Also all the advice for a new cyclist with 1 arm will be great.
Thanks in advance for any input towards a better ride
The person I follow has a ball join setup allowing for more natural "wrist" flexion.
There is also a setup that allows for both hydraulic brakes to be setup on a single side, with appropriate engagement so you end up with 60x40 braking power and don't flip over the bars. I will try to track this down to show you.
#10
Wood Licker
Join Date: Apr 2002
Location: Whistler,BC
Posts: 16,966
Bikes: Trek Fuel EX 8 27.5 +, 2002 Transition Dirtbag, Kona Roast 2002
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 23 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
This guy is awesome, love his setup, this seems more ideal than a faux quick release hand.
Still trying to track down the brakes
Still trying to track down the brakes
#11
Junior Member
Thread Starter
Join Date: Nov 2018
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks Maelstrom, these vids should definitely help.
I'm waiting on the prosthetists to get back to me with what thety have planned.
Lucky I'm riding a road bike so the need for an adaptive device isn't as much as mtn bike.
I'm waiting on the prosthetists to get back to me with what thety have planned.
Lucky I'm riding a road bike so the need for an adaptive device isn't as much as mtn bike.
#12
Newbie
Join Date: Mar 2009
Location: Athens, Greece
Posts: 35
Bikes: Trek Fuel EX7 (09), Diamond Back Axis TT (94)
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 6 Times
in
5 Posts
@gixer by your username I don't need to ask which bike you came short on, but respect for not wasting any time.
You have a lot of years experience with 1 arm but what I really like is your braking setup... simple and easy.
The sad part is that everything in the sport is pricey so i'll have to wait and see what the prosthetist comes up with (which might take very long).
You have a lot of years experience with 1 arm but what I really like is your braking setup... simple and easy.
The sad part is that everything in the sport is pricey so i'll have to wait and see what the prosthetist comes up with (which might take very long).
Put a lot of time and effort into linked brakes, on the road if you ride in the same sort of conditions and don't spend much time going downhills they work ok
Problem i found was that a rear/front bias that worked well on flat dry road didn't work well on a wet downhill
Part of that is that on steeper road type downhills my weight would be shifter further back on the bike, this meant the front would have less weight on it, so more prone to locking up.
Once the front started locking up with the linked brake setup i found i'd lost most of my braking power
The dual brake setup takes some getting used to, but now i can feather each brake as needed
I think your case with a prosthetic might be one of those rare occurrences where you might be better off than me, as you don't have a useless, floppy arm to get in the way.
Please be careful locking that arm and prosthetic to the bike though, it can be a nightmare if you come off
Thread
Thread Starter
Forum
Replies
Last Post
StepDown
General Cycling Discussion
99
11-12-16 12:43 PM
MLKATO
Advocacy & Safety
63
06-02-11 11:35 PM