2004 LeMond Zurich 853/OCLV - 55cm, $800
10-20-19, 12:42 PM
#1
Senior Member
Thread Starter
Join Date: Sep 2019
Location: Cincinnati, OH
Posts: 655
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 189 Post(s)
Liked 473 Times
in
200 Posts
2004 LeMond Zurich 853/OCLV - 55cm, $800
SOLD SOLD SOLD
This bike has never been ridden on the road. It sat on a trainer for a couple months and then was stored in a basement. Ksyrium wheels were an early upgrade and have approximately 300 miles on them from being used on another bike. The bike is as clean as you'll find and the 853/120 OCLV ride is legendary. The LeMond bikes used 53-55-57cm etc. sizing. This rides nearest to a 56cm but could be comfortable for someone who rides a 54cm depending on fit.Component GroupShimano Ultegra
Bottom BracketShimano Ultegra
ChainShimano CN-HG93
WheelsetMavic Ksyrium
TiresMichelin Pro 4 Service Course
Frame ConstructionTIG-welded
Fork Brand & ModelBontrager Race Lite Carbon
Cassette9-speed, 12-25 teeth
CranksetShimano Ultegra, 32/42/52 teeth
Handlebar3T Forgie XL
Handlebar Stem3T Forgie XL
Headset1 1/8inch threadless Cane Creek S-6
SaddleFabric Scoop
SeatpostAluminum micro-adjust
BrakesetShimano Ultegra Dual Pivot brakes, Shimano Ultegra STI Dual Control levers
Fork MaterialCarbon fiber, aero crown
Frame Tubing MaterialReynolds 853 spine/120 OCLV Carbon cockpit
Shift LeversShimano Ultegra STI Dual Control
This bike has never been ridden on the road. It sat on a trainer for a couple months and then was stored in a basement. Ksyrium wheels were an early upgrade and have approximately 300 miles on them from being used on another bike. The bike is as clean as you'll find and the 853/120 OCLV ride is legendary. The LeMond bikes used 53-55-57cm etc. sizing. This rides nearest to a 56cm but could be comfortable for someone who rides a 54cm depending on fit.Component GroupShimano Ultegra
Bottom BracketShimano Ultegra
ChainShimano CN-HG93
WheelsetMavic Ksyrium
TiresMichelin Pro 4 Service Course
Frame ConstructionTIG-welded
Fork Brand & ModelBontrager Race Lite Carbon
Cassette9-speed, 12-25 teeth
CranksetShimano Ultegra, 32/42/52 teeth
Handlebar3T Forgie XL
Handlebar Stem3T Forgie XL
Headset1 1/8inch threadless Cane Creek S-6
SaddleFabric Scoop
SeatpostAluminum micro-adjust
BrakesetShimano Ultegra Dual Pivot brakes, Shimano Ultegra STI Dual Control levers
Fork MaterialCarbon fiber, aero crown
Frame Tubing MaterialReynolds 853 spine/120 OCLV Carbon cockpit
Shift LeversShimano Ultegra STI Dual Control
Last edited by alexihnen; 10-22-19 at 08:22 PM. Reason: Sold.
10-21-19, 07:36 PM
#2
Senior Member
Thread Starter
Join Date: Sep 2019
Location: Cincinnati, OH
Posts: 655
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 189 Post(s)
Liked 473 Times
in
200 Posts
I have an $800 offer on eBay )+$75 packing/shipping... happy to sell here for $750+$75 packing/shipping.
10-25-19, 01:39 PM
#3
Senior Member
Join Date: Feb 2017
Location: Northern Shenandoah Valley
Posts: 4,138
Bikes: More bikes than riders
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 1443 Post(s)
Liked 759 Times
in
568 Posts
I know this bike is sold, but for my own learning (and perhaps others), is that drive side seat stay bolted to the drive side dropout? It appears to be, in the third picture down (overlooking the hub and cassette). If it is indeed bolted...that's relatively uncommon among chain-driven bikes, yes? (I know this is employed on belt-driven bikes.)
