Pinion and Fixed-gear?
#1
Senior Member
Thread Starter
Join Date: Jun 2015
Location: Montreal, Quebec, Canada
Posts: 64
Bikes: 1989 Cannondale SM2000 with drop bars and Nitto technomic stem; 194? CCM Step Through; ???? Stumpjumper (currently frame)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 22 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
Pinion and Fixed-gear?
Hey all, just had a thought about using internal gearboxes like pinion to run a geared fixed-gear (or rather a coast-less geared-gear?)and was curious as to whether it had been done before. Does anyone know of a set-up like this? Maybe there's something about gearbox technology that wouldn't allow fixed-gear that I am unaware of?
Thanks everyone!
Thanks everyone!
#2
- Soli Deo Gloria -
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,779
Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix
Mentioned: 235 Post(s)
Tagged: 0 Thread(s)
Quoted: 6844 Post(s)
Liked 736 Times
in
469 Posts
What problem are you trying to solve?
Why not just run a normal fixed gear?
Why not just run a normal fixed gear?
#3
Dirty Heathen
Join Date: Oct 2015
Location: MC-778, 6250 fsw
Posts: 2,182
Bikes: 1997 Cannondale, 1976 Bridgestone, 1998 SoftRide, 1989 Klein, 1989 Black Lightning #0033
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 889 Post(s)
Liked 906 Times
in
534 Posts
So, you want a 3-speed fixie? I suppose such a thing could be made, by locking the sprocket on a 3-speed IGH, but i'm not sure how well it would work.
The actual 'shift' between gears is made, the wheels, cranks and the rest of the driveline are all moving at different speeds. The freewheel allows for those little differences to even out as the gear ratios change.
Basically, what you want to do is like shifting a manual transmission, without using the clutch, or backing off the throttle. It can be done, it just won't be pretty.
The actual 'shift' between gears is made, the wheels, cranks and the rest of the driveline are all moving at different speeds. The freewheel allows for those little differences to even out as the gear ratios change.
Basically, what you want to do is like shifting a manual transmission, without using the clutch, or backing off the throttle. It can be done, it just won't be pretty.
#4
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,704
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5778 Post(s)
Liked 2,576 Times
in
1,427 Posts
Decades back (prior to WW-II) Sturmey Archer produced internal planetary geared 2 speed fixed gear hubs. I've been riding one on and off for the last 45 years or so. They also produced a 3-speed version later on, and both of these are collectors items today.
I believe that similar hubs have been reprised recently, but can't confirm whether this is so.
I believe that similar hubs have been reprised recently, but can't confirm whether this is so.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#5
Rhapsodic Laviathan
Decades back (prior to WW-II) Sturmey Archer produced internal planetary geared 2 speed fixed gear hubs. I've been riding one on and off for the last 45 years or so. They also produced a 3-speed version later on, and both of these are collectors items today.
I believe that similar hubs have been reprised recently, but can't confirm whether this is so.
I believe that similar hubs have been reprised recently, but can't confirm whether this is so.
#6
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,903
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4806 Post(s)
Liked 3,927 Times
in
2,553 Posts
Sturmey-Archer makes a fix gear 3-speed, the S3X. Sturmey-Archer | Products. The mechanic in my shop and Sheldon Brown who used to come by and hang out both had S-A fix gears.
Ben
Ben
#7
Banned
O_Pinion and Fixed-gear?
Hey all, just had a thought about using internal gearboxes like pinion to run a geared fixed-gear (or rather a coast-less geared-gear?)and was curious as to whether it had been done before. Does anyone know of a set-up like this? Maybe there's something about gearbox technology that wouldn't allow fixed-gear that I am unaware of?
Thanks everyone!
Thanks everyone!
Last edited by fietsbob; 01-02-17 at 10:28 AM.
#8
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,704
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5778 Post(s)
Liked 2,576 Times
in
1,427 Posts
So, you want a 3-speed fixie? I suppose such a thing could be made, by locking the sprocket on a 3-speed IGH, but i'm not sure how well it would work.
The actual 'shift' between gears is made, the wheels, cranks and the rest of the driveline are all moving at different speeds. The freewheel allows for those little differences to even out as the gear ratios change.
Basically, what you want to do is like shifting a manual transmission, without using the clutch, or backing off the throttle. It can be done, it just won't be pretty.
The actual 'shift' between gears is made, the wheels, cranks and the rest of the driveline are all moving at different speeds. The freewheel allows for those little differences to even out as the gear ratios change.
Basically, what you want to do is like shifting a manual transmission, without using the clutch, or backing off the throttle. It can be done, it just won't be pretty.
Fixed hubs directly drive the shell through the planet system and use sliding clutches with dead spots between gears to ensure that 2 different gears can't be engaged simultaneously (which would lock up the hub).
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#9
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,704
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5778 Post(s)
Liked 2,576 Times
in
1,427 Posts
Or you can set the up hub with higher gearing than otherwise, knowing that you can downshift if/when needed. My 2 speed fixed hub is set up roughly 10% higher than I normally ride fixed, giving me a higher cruising speed on the flats, yet still giving me the flexibility for hills.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#10
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,373
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2482 Post(s)
Liked 2,952 Times
in
1,677 Posts
I read the opening post as asking whether there is, was, or could be such a thing as a fixed-gear bike with a chainless shaft drive. No mention was made of multiple gearing.
If I read that correctly, here's a Wikipedia page on the topic:
https://en.wikipedia.org/wiki/Shaft-driven_bicycle
If I read that correctly, here's a Wikipedia page on the topic:
https://en.wikipedia.org/wiki/Shaft-driven_bicycle
#11
Senior Member
Join Date: Nov 2015
Posts: 216
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 66 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I read the opening post as asking whether there is, was, or could be such a thing as a fixed-gear bike with a chainless shaft drive. No mention was made of multiple gearing.
If I read that correctly, here's a Wikipedia page on the topic:
https://en.wikipedia.org/wiki/Shaft-driven_bicycle
If I read that correctly, here's a Wikipedia page on the topic:
https://en.wikipedia.org/wiki/Shaft-driven_bicycle
Hey all, just had a thought about using internal gearboxes like pinion to run a geared fixed-gear (or rather a coast-less geared-gear?)and was curious as to whether it had been done before. Does anyone know of a set-up like this? Maybe there's something about gearbox technology that wouldn't allow fixed-gear that I am unaware of?
Thanks everyone!
Thanks everyone!
Good thread: I can now see how a multiple gear fixie could be of value. Learn something new everyday.
#12
Senior member
Join Date: Oct 2004
Location: Oakville Ontario
Posts: 8,117
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 943 Post(s)
Liked 658 Times
in
371 Posts
Sturmey Archer has a 3 speed fixed gear hub in current production. The S3X has the bottom 3 ratios of the wide range 5 speed, (now out of production), with the top gear being direct drive.
The range could be expanded by adding a Sclumpf 2 speed crank set, but the combined gear lash of the two mechanisms would drive any dedicated fixie rider crazy.
I have no direct experience with the Pinion gearbox, and I could not tell you if it has a freewheeling mechanism, but even if it didn't, it would certainly have significant lash, as any gear assembly must.
As the Pinion box becomes more common, as I believe it will for certain applications, it would be interesting to see somebody try it.
Hmmmm.
The range could be expanded by adding a Sclumpf 2 speed crank set, but the combined gear lash of the two mechanisms would drive any dedicated fixie rider crazy.
I have no direct experience with the Pinion gearbox, and I could not tell you if it has a freewheeling mechanism, but even if it didn't, it would certainly have significant lash, as any gear assembly must.
As the Pinion box becomes more common, as I believe it will for certain applications, it would be interesting to see somebody try it.
Hmmmm.
#13
Senior member
Join Date: Oct 2004
Location: Oakville Ontario
Posts: 8,117
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 943 Post(s)
Liked 658 Times
in
371 Posts
I guess the OP's use of the term "geared-gear" and "gear box" hinted at multiple gears. But the use of the term "pinion" certainly brings up images of a bevel-box final drive found at the end of shaft drives.
Good thread: I can now see how a multiple gear fixie could be of value. Learn something new everyday.
Good thread: I can now see how a multiple gear fixie could be of value. Learn something new everyday.
PINION | DRIVE TECHNOLOGY | | bicycle gearboxes ? made in germany
#14
Senior Member
Join Date: Nov 2015
Posts: 216
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 66 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Pinion is a brand name of a bottom bracket mounted multi speed transmission.
PINION | DRIVE TECHNOLOGY | | bicycle gearboxes ? made in germany
PINION | DRIVE TECHNOLOGY | | bicycle gearboxes ? made in germany
Just took a quick look at that link and...just wow! But..not exactly a bolt on option is it?
#15
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,784
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3587 Post(s)
Liked 3,400 Times
in
1,934 Posts
Converting a Sturmey-Archer AW Hub Into a Two-speed Fixed Gear
#17
Senior Member
Thread Starter
Join Date: Jun 2015
Location: Montreal, Quebec, Canada
Posts: 64
Bikes: 1989 Cannondale SM2000 with drop bars and Nitto technomic stem; 194? CCM Step Through; ???? Stumpjumper (currently frame)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 22 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
thanks everyone, I guess I should have been more specific
My question was whether or not anyone has used a bottom bracket mounted gear system (like Pinion's) to make a geared fixie. I'm well aware of the fixed gear hubs, but I've read that they just don't feel right. Someone was talking about gear lash, could someone please explain that concept to me?
My question was whether or not anyone has used a bottom bracket mounted gear system (like Pinion's) to make a geared fixie. I'm well aware of the fixed gear hubs, but I've read that they just don't feel right. Someone was talking about gear lash, could someone please explain that concept to me?
#18
Senior member
Join Date: Oct 2004
Location: Oakville Ontario
Posts: 8,117
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 943 Post(s)
Liked 658 Times
in
371 Posts
The internal mechanism of a hub has several points of power transmission, each of which must have this lash. It's cumulative, so the more points of engagement along the flow of power, the more accumulated lash in the train.
More info here.
https://www.quora.com/What-is-the-ba...isadvantageous
#20
Senior Member
Thread Starter
Join Date: Jun 2015
Location: Montreal, Quebec, Canada
Posts: 64
Bikes: 1989 Cannondale SM2000 with drop bars and Nitto technomic stem; 194? CCM Step Through; ???? Stumpjumper (currently frame)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 22 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
#21
Senior Member
Thread Starter
Join Date: Jun 2015
Location: Montreal, Quebec, Canada
Posts: 64
Bikes: 1989 Cannondale SM2000 with drop bars and Nitto technomic stem; 194? CCM Step Through; ???? Stumpjumper (currently frame)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 22 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
Any assembly which has gear teeth in mesh must have a a small degree of free movement between those teeth to prevent binding in the mechanism. The term for this free movement is gear lash.
The internal mechanism of a hub has several points of power transmission, each of which must have this lash. It's cumulative, so the more points of engagement along the flow of power, the more accumulated lash in the train.
More info here.
https://www.quora.com/What-is-the-ba...isadvantageous
The internal mechanism of a hub has several points of power transmission, each of which must have this lash. It's cumulative, so the more points of engagement along the flow of power, the more accumulated lash in the train.
More info here.
https://www.quora.com/What-is-the-ba...isadvantageous
#24
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,704
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5778 Post(s)
Liked 2,576 Times
in
1,427 Posts
thanks everyone, I guess I should have been more specific
My question was whether or not anyone has used a bottom bracket mounted gear system (like Pinion's) to make a geared fixie. I'm well aware of the fixed gear hubs, but I've read that they just don't feel right. Someone was talking about gear lash, could someone please explain that concept to me?
My question was whether or not anyone has used a bottom bracket mounted gear system (like Pinion's) to make a geared fixie. I'm well aware of the fixed gear hubs, but I've read that they just don't feel right. Someone was talking about gear lash, could someone please explain that concept to me?
As for gear lash, that's simply a sub category of backlash which is an issue in mechanical systems. Both because of manufacturing tolerances, and to ensure low friction operation, systems are built with a bit of play. So, there's a bit of free play between the parts when engaged forward and reverse. In a car, you hear and feel it as a click (or clank) when you shift from forward to reverse.
If you've been riding fixed for a while, you know about this already. You keep a bit of slack in the chain to allow for the eccentricity in the sprockets. When you reverse torque the tension shifts from the upper to lower loop, and there's a bit of backlash you can feel in the pedals. IME, with the hubs I've used, the internal backlash is no more than that in the chain, so I don't consider it an issue.
Of course, whether hub backlash is an issue at all depends on the relative precision of the hub vs. sprockets, and how tight you can safely run the chain. Unless it's extreme, you adapt and don't notice it when riding.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#25
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,784
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3587 Post(s)
Liked 3,400 Times
in
1,934 Posts
Other people here have already explained why some lash is necessary; I can tell you what it feels like on the road. It feels like riding a fixed gear bike with a slightly loose chain. That's all.