Handlebars?
10-09-19, 07:04 PM
#26
Senior Member
Thread Starter
10-09-19, 07:16 PM
#27
Senior Member
Thread Starter
I had an upload issue but tried again and it worked.
10-09-19, 07:17 PM
#28
Senior Member
Join Date: Mar 2015
Location: New Zealand
Posts: 1,052
Bikes: Gunnar, Shogun, Concorde, F Moser, Pete Tansley, Rocky Mtn, Diamant, Krapf, Marin, Avanti, Winora, Emmelle, Ken Evans
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 273 Post(s)
Liked 416 Times
in
217 Posts
most moustache bars will work fine with road levers on the bend. many have a drop and so you can mount them upside down and get a rise. you can shim the clamp if it's 25.4 and you want to re-use your stem.
other alt bars like velo orange tourist probably won't work well with road levers but they're a good option. older mtb levers for cantis should have the right pull and work on those, and only be a few dollars.
I'm a fan of high drop bars but if drops are just not actually what you want then don't suffer them
other alt bars like velo orange tourist probably won't work well with road levers but they're a good option. older mtb levers for cantis should have the right pull and work on those, and only be a few dollars.
I'm a fan of high drop bars but if drops are just not actually what you want then don't suffer them
Likes For Soody:
10-09-19, 07:21 PM
#29
Senior Member
Thread Starter
I was kinda thinking about the mustache bars, here's a sample similar to my bike,
10-09-19, 07:32 PM
#30
Senior Member
Join Date: Mar 2015
Location: New Zealand
Posts: 1,052
Bikes: Gunnar, Shogun, Concorde, F Moser, Pete Tansley, Rocky Mtn, Diamant, Krapf, Marin, Avanti, Winora, Emmelle, Ken Evans
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 273 Post(s)
Liked 416 Times
in
217 Posts
Those are bullhorns
also if the bullhorns or pursuit bars have a sweep up at the end then you can use your road levers with them fine. I did that for a while (below)
It's cool, but hardly more 'comfortable' than drop bars
also if the bullhorns or pursuit bars have a sweep up at the end then you can use your road levers with them fine. I did that for a while (below)
It's cool, but hardly more 'comfortable' than drop bars
Likes For Soody:
10-09-19, 07:33 PM
#31
Senior Member
Join Date: Mar 2015
Location: New Zealand
Posts: 1,052
Bikes: Gunnar, Shogun, Concorde, F Moser, Pete Tansley, Rocky Mtn, Diamant, Krapf, Marin, Avanti, Winora, Emmelle, Ken Evans
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 273 Post(s)
Liked 416 Times
in
217 Posts
VO Tourist.
Likes For Soody:
10-09-19, 07:33 PM
#32
Senior Member
Thread Starter
10-09-19, 07:35 PM
#33
Senior Member
Join Date: Apr 2017
Location: Los Angeles, CA
Posts: 2,249
Bikes: 1964 Legnano Roma Olympiade, 1973 Raleigh Super Course, 1978 Raleigh Super Course, 1978 Peugeot PR10, 2002 Specialized Allez, 2007 Specialized Roubaix, 2013 Culprit Croz Blade
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 741 Post(s)
Liked 818 Times
in
421 Posts
+1 on the Nitto Technohomic stem. I wish I was pushing 60, instead of being the wrong side of 70. I have ridden this Legnano since new in '64. Back in the day there was more bike and less me. I hated to swap out the old original Ambrosio stem, but the Nitto provided a better "old man" reach, looks good, and they offer several fit options. I also used a Ritchie adjustable stem while recovering from a broken arm. It's another alternative to finding a fit that suits you, then you can decide on a proper stem option. Good luck with your situation.
This is not a Ritchie, but similar deal:
https://www.amazon.com/FOMTOR-Adjustable-Degree-Handlebar-Mountain/dp/B07QRPVKKL/ref=pd_day0_hl_468_2/130-1401786-6054505?_encoding=UTF8&pd_rd_i=B07QRPVKKL&pd_rd_r=9b48b7c7-08db-4c16-88a0-f21717bb51f9&pd_rd_w=GYQzm&pd_rd_wg=xxDzR&pf_rd_p=0501877d-5f8c-4ec8-9861-e0476eecc53e&pf_rd_r=JFC8BJH43735REM6686M&refRID=JFC8BJH43735REM6686M
The Nitto has gotten me thru two Eroica rides.
This is not a Ritchie, but similar deal:
https://www.amazon.com/FOMTOR-Adjustable-Degree-Handlebar-Mountain/dp/B07QRPVKKL/ref=pd_day0_hl_468_2/130-1401786-6054505?_encoding=UTF8&pd_rd_i=B07QRPVKKL&pd_rd_r=9b48b7c7-08db-4c16-88a0-f21717bb51f9&pd_rd_w=GYQzm&pd_rd_wg=xxDzR&pf_rd_p=0501877d-5f8c-4ec8-9861-e0476eecc53e&pf_rd_r=JFC8BJH43735REM6686M&refRID=JFC8BJH43735REM6686M
The Nitto has gotten me thru two Eroica rides.
Last edited by Slightspeed; 10-09-19 at 08:03 PM.
Likes For Slightspeed:
10-09-19, 07:45 PM
#34
Senior Member
Join Date: Mar 2015
Location: New Zealand
Posts: 1,052
Bikes: Gunnar, Shogun, Concorde, F Moser, Pete Tansley, Rocky Mtn, Diamant, Krapf, Marin, Avanti, Winora, Emmelle, Ken Evans
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 273 Post(s)
Liked 416 Times
in
217 Posts
very cool legano
10-09-19, 07:48 PM
#36
Senior Member
Join Date: Feb 2017
Location: Concord, NC
Posts: 699
Bikes: 1984 Bianchi Tipo Corsa, 1985 Cannondale SM600 (24/26)
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 235 Post(s)
Liked 349 Times
in
190 Posts
I didn't notice that when I suggested the Nitto; that's an important point to confirm first.
10-09-19, 08:02 PM
#37
Senior Member
Join Date: Mar 2015
Location: New Zealand
Posts: 1,052
Bikes: Gunnar, Shogun, Concorde, F Moser, Pete Tansley, Rocky Mtn, Diamant, Krapf, Marin, Avanti, Winora, Emmelle, Ken Evans
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 273 Post(s)
Liked 416 Times
in
217 Posts
10-09-19, 08:12 PM
#38
Senior Member
Thread Starter
In the catalog it says alloy handlebar (SR-CTB Alloy) and stem (SR-CLS Alloy)
The M spoken of is identical to the M in a sprocket logo standing for Miyata.
The M spoken of is identical to the M in a sprocket logo standing for Miyata.
10-09-19, 08:13 PM
#39
Hoards Thumbshifters
Join Date: Jul 2010
Location: Signal Mountain, TN
Posts: 1,155
Bikes: '23 Black Mtn MC, '87 Bruce Gordon Chinook, '08 Jamis Aurora, '86 Trek 560, '97 Mongoose Rockadile, & '91 Trek 750
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 245 Post(s)
Liked 327 Times
in
191 Posts
I went to an 80cm Nitto Technomic with a Nitto noodle bar. Changed everything for me.
Whatever you do trial your new setup without wrapping handlebar tape. You can clear tape the brake housing though. That way you can adjust, test ride, adjust, test ride, swap bars, test ride.
Whatever you do trial your new setup without wrapping handlebar tape. You can clear tape the brake housing though. That way you can adjust, test ride, adjust, test ride, swap bars, test ride.
Likes For mechanicmatt:
10-09-19, 08:15 PM
#40
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,890
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4789 Post(s)
Liked 3,915 Times
in
2,546 Posts
Ben
Likes For 79pmooney:
10-09-19, 09:28 PM
#41
Car free since 2018
Join Date: Aug 2017
Location: Vancouver, BC
Posts: 684
Bikes: Mostly japanese ones
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 257 Post(s)
Liked 269 Times
in
134 Posts
soma sutro is 180mm, 1 cm shorter than Nitto deluxe. Also amazon.com has cheaper quill riser stems if price is an object.
10-10-19, 12:00 AM
#42
Shifting is fun!
Join Date: Aug 2009
Location: South Holland, NL
Posts: 10,998
Bikes: Yes, please.
Mentioned: 279 Post(s)
Tagged: 0 Thread(s)
Quoted: 2192 Post(s)
Liked 4,581 Times
in
1,762 Posts
Another option:
10-10-19, 04:13 AM
#43
Hoards Thumbshifters
Join Date: Jul 2010
Location: Signal Mountain, TN
Posts: 1,155
Bikes: '23 Black Mtn MC, '87 Bruce Gordon Chinook, '08 Jamis Aurora, '86 Trek 560, '97 Mongoose Rockadile, & '91 Trek 750
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 245 Post(s)
Liked 327 Times
in
191 Posts
I went to an 80cm Nitto Technomic with a Nitto noodle bar. Changed everything for me.
Whatever you do trial your new setup without wrapping handlebar tape. You can clear tape the brake housing though. That way you can adjust, test ride, adjust, test ride, swap bars, test ride.
Whatever you do trial your new setup without wrapping handlebar tape. You can clear tape the brake housing though. That way you can adjust, test ride, adjust, test ride, swap bars, test ride.
My setup
10-10-19, 05:18 AM
#44
Senior Member
Join Date: Nov 2005
Location: NW Ohio
Posts: 3,410
Bikes: 1984 Miyata 310, 1986 Schwinn Sierra, 2011 Jamis Quest, 1980 Peugeot TH8 Tandem, 1992 Performance Parabola, 1987 Ross Mt. Hood, 1988 Schwinn LeTour, 1988 Trek 400T, 1981 Fuji S12-S LTD, 197? FW Evans
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 524 Post(s)
Liked 974 Times
in
509 Posts
I have both the Soma Sutro and the Nitto Technomic. The Sutro is about 1 inch taller than a normal stem, the Technomic is about 2 inches taller. Since the head tube is angled, the reach is shorter as the stem gets taller.
10-10-19, 05:30 AM
#45
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1607 Post(s)
Liked 2,213 Times
in
1,103 Posts
OK I will take a different approach. I think you frame is too small! I am pushing 70 and think I am the exception, but my bars are 2" lower than my saddle. I find that doing sit ups and abdominal exercise helps with the back issues. Strengthen that core and you will do better.
This is my main ride which I enjoy the most. Note that the stand kicks up the back a bit.
P1010551, on Flickr
This is my main ride which I enjoy the most. Note that the stand kicks up the back a bit.
P1010551, on Flickr
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
10-10-19, 06:33 AM
#46
minimalist cyclist
Join Date: Mar 2014
Location: North Carolina
Posts: 1,745
Bikes: yes please
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1119 Post(s)
Liked 1,638 Times
in
943 Posts
I've used these Cromo quill extenders with good results. Being very tall and not always finding the bike I want in a frame as large as I need these raise the stem up to 8½ inches. That wording "up to" leads me to believe it can be cut down if 8½" is too much. I think they were about $15 each.
Last edited by Deal4Fuji; 10-10-19 at 06:53 AM.
10-10-19, 07:16 AM
#47
Senior Member
Thread Starter
What are these called? With the taller stem I may become cramped but with these I could still stretch out and not be so low. Especially with regards to to brakes. As they are currently awkward to access.
Last edited by roadbikeChris; 10-10-19 at 10:21 AM.
10-10-19, 10:45 AM
#48
Senior Member
Thread Starter
In theory would something like this work with shims?
https://www.ebay.com/itm/Bike-Handlebar-Cycling-Bicycle-Aluminum-Alloy-Sports-Parts-Replacement/303290728205?hash=item469d893f0d%3Am%3AmpoT1YIzrYnZI9nxmZIArag&LH_BIN=1
For reference only what size bars do I need?
https://www.ebay.com/itm/Bike-Handlebar-Cycling-Bicycle-Aluminum-Alloy-Sports-Parts-Replacement/303290728205?hash=item469d893f0d%3Am%3AmpoT1YIzrYnZI9nxmZIArag&LH_BIN=1
For reference only what size bars do I need?
10-10-19, 11:02 AM
#49
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,597
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3862 Post(s)
Liked 6,450 Times
in
3,190 Posts
Actually, that looks like a Cinelli 1R stem which means a 26.4mm bar afaik. So you'd be looking at replacing both the stem and the bar since 26.4 was a Cinelli-specific size.
10-10-19, 11:15 AM
#50
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,832
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2336 Post(s)
Liked 2,808 Times
in
1,534 Posts
try tilting the handle bars up a little bit. a bit first.... i know classic is drops parallel to the ground but simple no cost to try first is tilting the bars up a bit....made a difference for me in more than one case YMMV
OK, there's no way I can ride with the current configuration. I am pushing 60 and need to be more upright. Looking for suggestions...I want to keep the current brake levers to save cost. Just not sure what to do or what is best.
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
