Most bikes in a narrow space, any ideas?
#1
Randomhead
Thread Starter
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,397
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,698 Times
in
2,518 Posts
Most bikes in a narrow space, any ideas?
Horrors, I need to park my car in the garage. And for some reason my wife doesn't think I should park it on her side and make her park outside. So the frame shop is going to have to get compressed and parts of it moved to the basement. But the bike collection is also taking too much space.
My thought is that putting two levels of bikes parked with their handlebars and rear tires touching the wall will fit the most bikes. Bikes overlapping as much as they can without making it a real mess. Anyone try this scheme?
My thought is that putting two levels of bikes parked with their handlebars and rear tires touching the wall will fit the most bikes. Bikes overlapping as much as they can without making it a real mess. Anyone try this scheme?
#2
Thrifty Bill
Join Date: Jan 2008
Location: Mountains of Western NC
Posts: 23,525
Bikes: 86 Katakura Silk, 87 Prologue X2, 88 Cimarron LE, 1975 Sekai 4000 Professional, 73 Paramount, plus more
Mentioned: 96 Post(s)
Tagged: 0 Thread(s)
Quoted: 1236 Post(s)
Liked 964 Times
in
628 Posts
How high is the ceiling? Hang them vertically from the ceiling, one hook per bike. Remove pedals and rotate handlebars 90 degrees and you can pack them vertically just a few inches apart.
Car can probably park underneath the bikes, taking zero floor space.
Car can probably park underneath the bikes, taking zero floor space.
#3
Randomhead
Thread Starter
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,397
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,698 Times
in
2,518 Posts
The ceiling is not very high. The way the door rails are situated, it would be a real problem to get a bike on a hook there. But there is room for two levels of bikes below the rails.
#4
Insane Bicycle Mechanic
Join Date: Mar 2008
Location: other Vancouver
Posts: 9,839
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 806 Post(s)
Liked 707 Times
in
378 Posts
My garage has a 8-foot ceiling and it's drywalled, so the studs are covered. I have a length of 2x4 bolted to the studs about 18" from the wall and there are 6 hooks screwed into the 2x4. I can hang 6 bikes in a space 12' long by 2' wide with the space underneath the bikes free for storage boxes of random stuff.
__________________
Jeff Wills
Comcast nuked my web page. It will return soon..
Jeff Wills
Comcast nuked my web page. It will return soon..
#5
Randomhead
Thread Starter
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,397
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,698 Times
in
2,518 Posts
That's about what I have now, the problem is there are still 3 bikes on the floor. And it's a real pain to hang bikes from hooks. That was one of the least pleasant parts of being a bike mechanic. My back still flinches when I think about lifting a Schwinn varsity
#6
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,626
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3888 Post(s)
Liked 6,485 Times
in
3,209 Posts
Put the nicest ones inside the house, you know, as decoration.
"Honey, why is your Bianchi hanging above the bed?"
"Isn't it sexy, dear?"
"Honey, why is your Bianchi hanging above the bed?"
"Isn't it sexy, dear?"
#7
Senior Member
Maybe hang one bike from another to achieve two levels? Certainly not ideal but if the need is temporary it may be tolerable.
I have a similar issue with garage dedicated to bikes. Recently I had to replace the camshaft in my truck. Rainy season had already begun. I borrowed a tarp and did the job in the driveway, much to the horror of my neighbors.
I have a similar issue with garage dedicated to bikes. Recently I had to replace the camshaft in my truck. Rainy season had already begun. I borrowed a tarp and did the job in the driveway, much to the horror of my neighbors.
__________________
I.C.
I.C.
#8
Senior Member
Join Date: Aug 2006
Location: Portland OR
Posts: 7,639
Bikes: 61 Bianchi Specialissima 71 Peugeot G50 7? P'geot PX10 74 Raleigh GranSport 75 P'geot UO8 78? Raleigh Team Pro 82 P'geot PSV 86 P'geot PX 91 Bridgestone MB0 92 B'stone XO1 97 Rans VRex 92 Cannondale R1000 94 B'stone MB5 97 Vitus 997
Mentioned: 146 Post(s)
Tagged: 0 Thread(s)
Quoted: 392 Post(s)
Likes: 0
Liked 49 Times
in
31 Posts
My garage has a 8-foot ceiling and it's drywalled, so the studs are covered. I have a length of 2x4 bolted to the studs about 18" from the wall and there are 6 hooks screwed into the 2x4. I can hang 6 bikes in a space 12' long by 2' wide with the space underneath the bikes free for storage boxes of random stuff.
#9
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,846
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2338 Post(s)
Liked 2,822 Times
in
1,541 Posts
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Likes For squirtdad:
#10
Señor Member
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,923
Bikes: Mostly English - predominantly Raleighs
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 1491 Post(s)
Liked 1,090 Times
in
638 Posts
A variation of this solution is what I'll be doing when I do the make-over of my bike storage in a narrow basement storage space. Slatwall is pretty pricey, so looking top either go with bands of slat, or to adapt similar hangers to attach to studs.
__________________
In search of what to search for.
In search of what to search for.
#11
Mr. Anachronism
Join Date: Jan 2013
Location: Somewhere west of Tobie's
Posts: 2,087
Bikes: fillet-brazed Chicago Schwinns, and some other stuff
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 526 Post(s)
Liked 256 Times
in
165 Posts
Removing pedals and rotating the handlebars is the way to pack the most bikes into a given space. It also helps you keep stems from welding themselves into the steerer tubes. Hanging vertically in alternating orientation will also give you more open floor space. They don't have to be overhead... just high enough on the wall to get them an inch or two off the floor. Those flash-welded Schwinns won't need to be hoisted up high... just tipped up vertically and lifted an inch or two. This arrangement will also keep them from becoming dominoes when you bump the first one getting out of your car.
__________________
"My only true wisdom is in knowing I have none" -Socrates
"My only true wisdom is in knowing I have none" -Socrates
#12
Senior Member
Join Date: Sep 2011
Location: Baltimore MD
Posts: 3,332
Bikes: '72 Motobecane Grand Record, '72 Gitane tandem, '72 Raleigh Super Course, '73 Raleigh Gran Sport, '73 Colnago Super, '76 Fiorelli Coppi, '78 Raleigh SBDU Team Pro, '78 Trek 930, '81 Holdsworth Special 650B, '86 Masi GC, ’94 Bridgestone RB-T
Mentioned: 67 Post(s)
Tagged: 0 Thread(s)
Quoted: 786 Post(s)
Liked 520 Times
in
281 Posts
For my riders, in my basement I alternate one bike vertically on a front-wheel hook (rear on the ground), and one bike on the floor facing out, rear wheel leaning against the stud. I fit two bikes per about 22" of wall. It's possible to (carefully) grab any of them without moving the others, and hooking the vertical ones is pretty easy. I also hook spare wheelsets above the bikes on the ground. Here's a quick diagram. In reality, they can be closer - about 2" between handlebars:
__________________
The man who dies with the most toys…is dead. - Rootboy
The man who dies with the most toys…is dead. - Rootboy
Last edited by jeirvine; 01-03-20 at 01:33 PM.
#13
Randomhead
Thread Starter
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,397
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,698 Times
in
2,518 Posts
I didn't mention that these bikes are all riders. The unridden ones are in the attic. I was thinking about the pedal hanger idea. Someone sells that for regular walls, Delta maybe?
With no car in my half of the garage and the frame shop only taking up half of the empty bay, I have really gotten used to having the bike I want on the floor. I have been thinking about parking my commuter on the front porch, but my wife accuses me of making the front porch look like the beverly hillbillies already.
With no car in my half of the garage and the frame shop only taking up half of the empty bay, I have really gotten used to having the bike I want on the floor. I have been thinking about parking my commuter on the front porch, but my wife accuses me of making the front porch look like the beverly hillbillies already.
#14
Junior Member
Use hooks like in some of the suggestions above, but mount them on French cleats, so that you can slide them as close together as possible once the bikes are hung. I've also seen some kits that use a similar solution made out of aluminum, but prefer the DIY approach.
#15
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1608 Post(s)
Liked 2,216 Times
in
1,103 Posts
https://www.amazon.com/Venzo-Bicycle...s%2C136&sr=8-4
Bought one of these but don't like it. But for your situation, it might be the best solution. Hard to get the top on out though.
Current high ceiling solution
P1000485, on Flickr
Single car garage solution
WP_20140302_002, on Flickr
Low ceiling, double car garage solution.
P8031673, on Flickr
Bought one of these but don't like it. But for your situation, it might be the best solution. Hard to get the top on out though.
Current high ceiling solution
P1000485, on Flickr
Single car garage solution
WP_20140302_002, on Flickr
Low ceiling, double car garage solution.
P8031673, on Flickr
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
Last edited by SJX426; 01-03-20 at 03:26 PM.
#16
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,547
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18376 Post(s)
Liked 4,511 Times
in
3,353 Posts
If you hang the bikes horizontal, you can probably park the hood of the car under the bikes.
Alternate bars forward/back.
Alternate bars forward/back.
#17
Randomhead
Thread Starter
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,397
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,698 Times
in
2,518 Posts
the hood end of the garage is still going to be the frame shop, it's just that I'll have to park the car outside to build frames in it.
#18
Ride, Wrench, Swap, Race
Join Date: Jan 2010
Location: Northern California
Posts: 9,194
Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.
Mentioned: 132 Post(s)
Tagged: 0 Thread(s)
Quoted: 1565 Post(s)
Liked 1,296 Times
in
866 Posts
How far from the wall can the bike space be?
Saddle height?
As a modified form of the usual "sardine" approach (22 bikes hung vertically and perpendicular to a 17' wall), perhaps the bikes could be twisted 45-degrees or so, by twisting the opposite loops of each hook 45 degrees instead of 90-degrees.
Using this approach, the usual bikes-per-foot spacing would be reduced, but so would the distance out from the wall.
Here is what 90-degrees from the wall looks like. But if they were twisted to be more like fish-scales(???).
Saddle height?
As a modified form of the usual "sardine" approach (22 bikes hung vertically and perpendicular to a 17' wall), perhaps the bikes could be twisted 45-degrees or so, by twisting the opposite loops of each hook 45 degrees instead of 90-degrees.
Using this approach, the usual bikes-per-foot spacing would be reduced, but so would the distance out from the wall.
Here is what 90-degrees from the wall looks like. But if they were twisted to be more like fish-scales(???).
#19
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,829 Times
in
1,995 Posts
Cheaper car- one you can tolerate parking outside? I laugh now at all the extension cords run out to cars in front of the garage door. level 1 charging, 120v. I'm told basically 5 miles per hr of charge...
One acquaintance had to get a level 2 charger, 11k and a new 200 amp service panel later...
#20
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,846
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2338 Post(s)
Liked 2,822 Times
in
1,541 Posts
reconsider the fleet? Heavy bikes go away.
Cheaper car- one you can tolerate parking outside? I laugh now at all the extension cords run out to cars in front of the garage door. level 1 charging, 120v. I'm told basically 5 miles per hr of charge...
One acquaintance had to get a level 2 charger, 11k and a new 200 amp service panel later...
Cheaper car- one you can tolerate parking outside? I laugh now at all the extension cords run out to cars in front of the garage door. level 1 charging, 120v. I'm told basically 5 miles per hr of charge...
One acquaintance had to get a level 2 charger, 11k and a new 200 amp service panel later...
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
#21
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,744
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,868 Times
in
1,439 Posts
In my experience, having some bikes hanging from the rear wheel in a tight space makes hanging the bikes awkward. When I had to condense my storage space I went for a two level approach (like what I think you described in your first post).
The upper bikes are still a little awkward to get out, but it's manageable.
The upper bikes are still a little awkward to get out, but it's manageable.
__________________
My Bikes
My Bikes
#22
Randomhead
Thread Starter
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,397
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,698 Times
in
2,518 Posts
I hate going to gas stations and I'm still on the first tank, 750 miles later. So I'm happy with the car. The level 2 charger is coming when I upgrade the heating system and need a subpanel anyway. It's rare that I drive the car before it has finished charging.
I have to clear everything out and do some experiments.
I have to clear everything out and do some experiments.
#23
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,858
Bikes: Too many to list here check my signature.
Mentioned: 192 Post(s)
Tagged: 2 Thread(s)
Quoted: 2930 Post(s)
Liked 2,925 Times
in
1,491 Posts
What about a garage extension?
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
#24
Randomhead
Thread Starter
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,397
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,698 Times
in
2,518 Posts
I have a shed, hopefully it doesn't come to that.
#25
Senior Member
Join Date: Mar 2014
Location: City of Angels
Posts: 4,870
Bikes: A few too many
Mentioned: 42 Post(s)
Tagged: 1 Thread(s)
Quoted: 1364 Post(s)
Liked 2,181 Times
in
1,183 Posts
How far from the wall can the bike space be?
Saddle height?
As a modified form of the usual "sardine" approach (22 bikes hung vertically and perpendicular to a 17' wall), perhaps the bikes could be twisted 45-degrees or so, by twisting the opposite loops of each hook 45 degrees instead of 90-degrees.
Using this approach, the usual bikes-per-foot spacing would be reduced, but so would the distance out from the wall.
Here is what 90-degrees from the wall looks like. But if they were twisted to be more like fish-scales(???).
Saddle height?
As a modified form of the usual "sardine" approach (22 bikes hung vertically and perpendicular to a 17' wall), perhaps the bikes could be twisted 45-degrees or so, by twisting the opposite loops of each hook 45 degrees instead of 90-degrees.
Using this approach, the usual bikes-per-foot spacing would be reduced, but so would the distance out from the wall.
Here is what 90-degrees from the wall looks like. But if they were twisted to be more like fish-scales(???).
Ben