PAS issues
#1
Senior Member
Thread Starter
PAS issues
I recently put an ebikeling waterproof kit on a 29'er. I've not been able to get PAS to work for more than a few seconds - it will start with pedaling then quits. ebikeling replaced the PAS and I get the same thing. I've asked them to send me another controller but they want the whole kit back to test and I'm not willing to do that. The throttle works and that's how I've been using the bike but I really want PAS to work. Any ideas would be appreciated!
__________________
I'm slow, go around
I'm slow, go around
#2
Senior Member
Join Date: Jul 2014
Location: socal
Posts: 4,265
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 883 Post(s)
Liked 823 Times
in
622 Posts
They seem to have good CS FME with them. Why not ask for a new controller? Probably they want the entire kit returned because they don't have the equipment and/or knowledge to test the controller in your kit
#3
Senior Member
Thread Starter
I did ask for a new controller and they are sending one. Looking for ideas if it's not the controller
__________________
I'm slow, go around
I'm slow, go around
Last edited by arsprod; 12-12-19 at 04:15 PM.
#4
Senior Member
Join Date: Jul 2014
Location: socal
Posts: 4,265
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 883 Post(s)
Liked 823 Times
in
622 Posts
Sorry, should have seen that. Seems like the controller must be the culprit, but guess the display is a possibility. If DW answers, he'll be more definitive.
#5
Senior Member
Join Date: Jul 2015
Location: Chicago Suburbs
Posts: 1,406
Bikes: GT Transeo & a half dozen ebike conversions.
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 340 Post(s)
Liked 275 Times
in
192 Posts
Two things can go wrong with PAS.First is magnet too far away. Yours looks OK. Other is the disk is on backwards.Sometimes when you do that, the PAS will work if the pedals spin backwards.There's often an arrow stamped on the disk, but sometimes that's not right either.
Is this the LCD or LED kit? I guess it doesn't matter, as I think they use the same controller now. If the new controller don't help, flip the disk.
.
Is this the LCD or LED kit? I guess it doesn't matter, as I think they use the same controller now. If the new controller don't help, flip the disk.
.
#6
Senior Member
Thread Starter
Two things can go wrong with PAS.First is magnet too far away. Yours looks OK. Other is the disk is on backwards.Sometimes when you do that, the PAS will work if the pedals spin backwards.There's often an arrow stamped on the disk, but sometimes that's not right either.
Is this the LCD or LED kit? I guess it doesn't matter, as I think they use the same controller now. If the new controller don't help, flip the disk.
.
Is this the LCD or LED kit? I guess it doesn't matter, as I think they use the same controller now. If the new controller don't help, flip the disk.
.
__________________
I'm slow, go around
I'm slow, go around
#8
Senior Member
Thread Starter