10 size socket tool found at Japanese store Oomomo
#1
Senior Member
Thread Starter
10 size socket tool found at Japanese store Oomomo
One of my favourite tools now... 6 mm to 15 mm
10 common bike nut sizes
10 common bike nut sizes
Last edited by natloz; 07-21-20 at 12:55 PM.
Likes For natloz:
#2
Really Old Senior Member
Just what are all those COMMON sizes found on bikes?
Will they ALL work in situ?
Will they ALL work in situ?
#3
Senior Member
Thread Starter
- seat posts
- cantilever brakes
- v-brakes
- axles
- derailleur nuts
- bike racks
Maybe there are others I will come across...just super convenient to rotate and move from part to part.
I of course don't know all available nut sizes on bikes (especially older bikes that don't use much hex)...but have found this quite useful.
Likes For natloz:
#4
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,515
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2747 Post(s)
Liked 3,395 Times
in
2,056 Posts
#5
Recreational Road Cyclist
Join Date: Sep 2013
Location: MetroWest, Mass.
Posts: 548
Bikes: 1990 Peter Mooney road bike
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 257 Post(s)
Liked 252 Times
in
134 Posts
I have used so far on the following:
- seat posts
- cantilever brakes
- v-brakes
- axles
- derailleur nuts
- bike racks
Maybe there are others I will come across...just super convenient to rotate and move from part to part.
I of course don't know all available nut sizes on bikes (especially older bikes that don't use much hex)...but have found this quite useful.
- seat posts
- cantilever brakes
- v-brakes
- axles
- derailleur nuts
- bike racks
Maybe there are others I will come across...just super convenient to rotate and move from part to part.
I of course don't know all available nut sizes on bikes (especially older bikes that don't use much hex)...but have found this quite useful.
Likes For BCDrums:
#6
Senior Member
Thread Starter
Likes For natloz:
#7
Senior Member
Thread Starter
It is new to me...but maybe because it is vintage and what is old is new again!
Likes For natloz:
#8
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times
in
723 Posts
I have a dog bone wrench like that which I used on my old Dunelt 3-speed bike back in the '60s. It was my father's so is likely over 70 years old or more. Still works as well (or poorly) as it did then.
#9
Senior Member
Join Date: Jun 2020
Location: Maryland
Posts: 1,380
Bikes: 1982 Bianchi Sport SX, Rayleigh Tamland 1, Rans V-Rex recumbent, Fuji MTB, 80's Cannondale MTB with BBSHD ebike motor
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 668 Post(s)
Liked 529 Times
in
355 Posts
Most everything on my bikes are allen key. My fenders do have an 8 mm hex nut but that is about it. Even the majority of my pedals go on and off with an allen key.
Not sure what I would do with a tool like that.
Likes For Pop N Wood:
#10
Senior Member
Join Date: Apr 2012
Location: Nor Cal
Posts: 6,016
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 1814 Post(s)
Likes: 0
Liked 923 Times
in
569 Posts
I just threw out a couple of those while cleaning my mothers estate.
One I recalled from my childhood & youth.
Pretty much worthless then, totally worthless now IMO.
One I recalled from my childhood & youth.
Pretty much worthless then, totally worthless now IMO.
#11
Senior Member
Join Date: Mar 2014
Location: City of Angels
Posts: 4,870
Bikes: A few too many
Mentioned: 42 Post(s)
Tagged: 1 Thread(s)
Quoted: 1364 Post(s)
Liked 2,181 Times
in
1,183 Posts
OP, likes the wrench and has found it useful....To each their own.
Ben
Ben
Likes For xiaoman1:
#12
Senior Member
Thread Starter
He has millions of them, all screaming incessantly. Even on bicycle sites.
Most everything on my bikes are allen key. My fenders do have an 8 mm hex nut but that is about it. Even the majority of my pedals go on and off with an allen key.
Not sure what I would do with a tool like that.
Most everything on my bikes are allen key. My fenders do have an 8 mm hex nut but that is about it. Even the majority of my pedals go on and off with an allen key.
Not sure what I would do with a tool like that.
Likes For natloz:
#13
Senior Member
Thread Starter
#14
Senior Member
I think that at one time or another everybody had one of those. And most are now covered in dust or in the bottom of the bottom drawer, or in a landfill. They tend to be poorly made, fit nut loosley and made of a soft material(lead?). They're too short for good leverage, and round off quickly if too much force is applied.
You'd be better off getting a proper set of wrenches.
You'd be better off getting a proper set of wrenches.
#15
Senior Member
Thread Starter
I think that at one time or another everybody had one of those. And most are now covered in dust or in the bottom of the bottom drawer, or in a landfill. They tend to be poorly made, fit nut loosley and made of a soft material(lead?). They're too short for good leverage, and round off quickly if too much force is applied.
You'd be better off getting a proper set of wrenches.
You'd be better off getting a proper set of wrenches.
However, this dog bone fits perfectly and is definitely not made of lead...