HELP, How do I clean hte seals on my MX COMP????:?!!
#1
-RiDe On-
Thread Starter
Join Date: Nov 2003
Location: Ontario, Canada
Posts: 168
Bikes: 1 Supercycle Hoolagan ...(i need a new bike as you can see)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
HELP, How do I clean hte seals on my MX COMP????:?!!
Hey everyone,
I just got a new fork with my One Hun, and I think i ****ED the seals. In the marzocchi book it says to pry them off with a screwdriver. I started to, but I think i tore the seal!! WTF. When the seals come out, is it just some piece of rubber. I dont want to do anymore damage (if i did) to the fork, and I need to clean them before I ride next!!!!! I jammed the screwdriver down, then try to pry them off, but NO luck. I need halp ASAP, i hope my fork is not screwed.
I just got a new fork with my One Hun, and I think i ****ED the seals. In the marzocchi book it says to pry them off with a screwdriver. I started to, but I think i tore the seal!! WTF. When the seals come out, is it just some piece of rubber. I dont want to do anymore damage (if i did) to the fork, and I need to clean them before I ride next!!!!! I jammed the screwdriver down, then try to pry them off, but NO luck. I need halp ASAP, i hope my fork is not screwed.
#3
-RiDe On-
Thread Starter
Join Date: Nov 2003
Location: Ontario, Canada
Posts: 168
Bikes: 1 Supercycle Hoolagan ...(i need a new bike as you can see)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by operator
Pictures...?
No...no pictures.....you cant see the tear....its just you can when you jam a screwdriver in there......I sent a few emails to marzocchi, but havent gotten a reply yet. Also, does anyone know the recommended psi for these forks. Im 160lbs.
But first....any answers on the seals?
#4
645f44
Join Date: Sep 2003
Location: Oxford, Uk
Posts: 482
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
It's dam near impossible to remove the seals with the stanctions in without damaging something. I don't know why they recomend it in the manual. I would take it appart to check the screwdriver didn't damage the stanction and to see if the seal needs replacing.
There should be tech manuals that show how to dissasemble the fork on the marzocchi site.
There should be tech manuals that show how to dissasemble the fork on the marzocchi site.