Low profile headlight?
#1
Senior Member
Thread Starter
Low profile headlight?
I want to commute my road bike a few days a week. Less than 10 miles round trip. In the mornings it's still just dark enough that I need a lamp. I really hate a cluttered cockpit. Is there a lamp that clamps to the head tube or is low slung on the bars? I really don't want to place anything on top. I realise this is purely vanity but.... Maybe something exists?
#2
Senior Member
Join Date: Mar 2015
Location: Quebec, Canada
Posts: 84
Bikes: Specialized Secteur Sport 2015, Vitus Zenium VRS 2014
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 17 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have the Barfly road max mount for that exact reason.
It attaches to the handlebar and holds the light in front, lower than the tops. The top of the mount can hold a bike computer.
It attaches to the handlebar and holds the light in front, lower than the tops. The top of the mount can hold a bike computer.
#3
Me duelen las nalgas
Join Date: Aug 2015
Location: Texas
Posts: 13,513
Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quoted: 4560 Post(s)
Liked 2,803 Times
in
1,801 Posts
Any light with an adjustable rubber strap or clamp strap should be able to fasten to most head tubes. I can strap both my Light & Motion Urban 500 and Serfas SL-255 to the head tube on my Univega. But they won't fit around the much larger diameter head tube on my Globe Carmel hybrid. I strap the Serfas around the suspension fork tube when I want the light at a lower angle.
But I fasten my lights to the head tube or fork because my handlebars are already so cluttered. I usually have a video camera mount, phone mount and handlebar bag or KlickFix adapter on the bars, so there's no room for the lights.
At least one of my riding buddies straps his standard headlights upside down on his handlebars. Not sure why. Maybe he prefers the slightly lower angle, or prefers to keep the top of the handlebar clear. Wouldn't work on my bikes -- the cables would interfere.
The only drawback to these methods is Light & Motion advises against mounting their Urban and similar lights upside down or sideways. The USB recharging port is sealed with a snug fitting plastic cap, but presumably water could infiltrate. Wednesday was the first time I was caught in a downpour and my L&M light was fine. So were my helmet lights by other makers -- those use less snug fitting soft rubber caps but these protected the USB ports well enough.
But I fasten my lights to the head tube or fork because my handlebars are already so cluttered. I usually have a video camera mount, phone mount and handlebar bag or KlickFix adapter on the bars, so there's no room for the lights.
At least one of my riding buddies straps his standard headlights upside down on his handlebars. Not sure why. Maybe he prefers the slightly lower angle, or prefers to keep the top of the handlebar clear. Wouldn't work on my bikes -- the cables would interfere.
The only drawback to these methods is Light & Motion advises against mounting their Urban and similar lights upside down or sideways. The USB recharging port is sealed with a snug fitting plastic cap, but presumably water could infiltrate. Wednesday was the first time I was caught in a downpour and my L&M light was fine. So were my helmet lights by other makers -- those use less snug fitting soft rubber caps but these protected the USB ports well enough.
#4
Senior Member
Join Date: Mar 2015
Location: Quebec, Canada
Posts: 84
Bikes: Specialized Secteur Sport 2015, Vitus Zenium VRS 2014
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 17 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Light & Motion sells a combo urban 800FC + Barfly SLI, and when using the barfly mount, the light has to be upside down.
I sont think there's any issues there, and certainly not with the warranty.
I sont think there's any issues there, and certainly not with the warranty.
#5
Senior Member
Join Date: Jan 2009
Location: Colorado Springs, CO
Posts: 5,978
Bikes: 2015 Charge Plug, 2007 Dahon Boardwalk, 1997 Nishiki Blazer, 1984 Nishiki International, 2006 Felt F65, 1989 Dahon Getaway V
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1364 Post(s)
Liked 1,684 Times
in
829 Posts
#6
Senior Member
Join Date: Jul 2014
Location: Western, MA
Posts: 323
Bikes: 2016 Felt Z85 105, 2016 GT Grade Sora
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 117 Post(s)
Liked 0 Times
in
0 Posts
i dont remember if it was a kludge my friend did, but he has an older Raleigh Record. he straps a bontrager ion 700 to his head tube or his fork.
#7
Senior Member
You can sort of see mine. I can't remember the name of the part of the bike it's attached to!
Bicycle and bridges by Ed Miller, on Flickr
Bicycle and bridges by Ed Miller, on Flickr
#8
Senior Member
Thread Starter
#9
Senior Member
Product Description | Origin8 You can get something like that for your fork and attach a light to it. Out of the way of the cockpit.
#10
LET'S ROLL
Generic Magicshine clone; a few possibilities with the supplied o rings.
In this video I mounted the head by the fork, my helmet & top tube:
In this video I mounted the head by the fork, my helmet & top tube:
__________________
One day: www.youtube.com/watch?v=20X43026ukY&list=UUHyRS8bRu6zPoymgKaIoDLA&index=1
One day: www.youtube.com/watch?v=20X43026ukY&list=UUHyRS8bRu6zPoymgKaIoDLA&index=1
#12
Senior Member
Minoura Spacer Light/Gadget Mount and Di Light Fender-Hole-Mount
#13
Full Member
Join Date: Aug 2014
Location: California
Posts: 343
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 77 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
Attachment 594098Attachment 594098I have a dynamo powered light permanently mounted on the fork crown.
#14
Senior Member
#15
Senior Member
I have rigged up a mount on my fork with one of those skewer nut adapters stubs paired with a Cateye light strap. I don't have a boss on my fork, like some touring bikes. This allows me to use a few different lights I own and mount them on the fork, away from the bars. Also nice for commuting as it's lower so less blinding for oncoming commuters.
Also picked up a fork mount thing, forget the make, but it's German. Allows me to mount a light above my v-brake.
Also picked up a fork mount thing, forget the make, but it's German. Allows me to mount a light above my v-brake.
#16
Senior Member
Join Date: Jul 2010
Location: Michigan
Posts: 4,863
Bikes: too many of all kinds
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 1147 Post(s)
Liked 415 Times
in
335 Posts
As mentioned in another threat, I use this one:
this one would be perfect if it had a helmet mount. 350 lumens, 70 grams.
https://cygolite.com/product/dart-pro-350-usb/
It is the perfect commuter light for me as it is so, so low profile and unobtrusive on the handle bars. Easy and Light enough to be mounted on my helmet too. I use it all year, day or night when commuting.
It is so low profile and integrated, it looks like the bike was built for that in mind.
I tend to mount other commuting tools on the stem (computer) or just below the handle bars (bell).
this one would be perfect if it had a helmet mount. 350 lumens, 70 grams.
https://cygolite.com/product/dart-pro-350-usb/
It is the perfect commuter light for me as it is so, so low profile and unobtrusive on the handle bars. Easy and Light enough to be mounted on my helmet too. I use it all year, day or night when commuting.
It is so low profile and integrated, it looks like the bike was built for that in mind.
I tend to mount other commuting tools on the stem (computer) or just below the handle bars (bell).
#17
Banned
The physics of foot-candlepower is such that the same light seems brighter , the closer it is to the surface being lit,
So a light mount QR Skewer nut will put your light right at your hub axle height...
So a light mount QR Skewer nut will put your light right at your hub axle height...
#18
Senior Member
Join Date: Jul 2010
Location: Michigan
Posts: 4,863
Bikes: too many of all kinds
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 1147 Post(s)
Liked 415 Times
in
335 Posts
What is a QR skewer nut mount?
I do like the way lower mounted lights provide shadow and texture to the road in front. Helmet mounted lights tend to flatten everything out.
I do like the way lower mounted lights provide shadow and texture to the road in front. Helmet mounted lights tend to flatten everything out.
#19
Banned
QR skewer nut, is on the opposite side of the fork from the lever... there are substitutes made for that nut that are a 1" tube,
with integrated threads, you use that like it were a handlebar tubing, to mount your light..
with integrated threads, you use that like it were a handlebar tubing, to mount your light..
#20
Banned
#21
Junior Member
Join Date: Jul 2016
Posts: 6
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I can't post links yet but there is a mount that bolts to the fork of a bicycle. Do a search for "Bike Front Light Extender Mount Fork Light archmount Extension". There are also mounts that attach to the wheel quick release. Search for "M-Wave Quick Release Light Holder". And another that you can replace a spacer with is "Minoura CS-500 Headset Spacer Mount Accessory Holder". Now that I think about it, I'm kicking myself for going the expensive route for my light mount when I think that headset spacer option would have worked great for me.
#22
Senior Member
there is a mount that bolts to the fork of a bicycle.
Do a search for "Bike Front Light Extender Mount Fork Light archmount Extension".
There are also mounts that attach to the wheel quick release. Search for "M-Wave Quick Release Light Holder".
And another that you can replace a spacer with is "Minoura CS-500 Headset Spacer Mount Accessory Holder".
Do a search for "Bike Front Light Extender Mount Fork Light archmount Extension".
There are also mounts that attach to the wheel quick release. Search for "M-Wave Quick Release Light Holder".
And another that you can replace a spacer with is "Minoura CS-500 Headset Spacer Mount Accessory Holder".
bikeforums.net/electronics-lighting-gadgets/1126857-minoura-spacer-light-gadget-mount-di-light-fender-hole-mount.html
#23
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,630
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,571 Times
in
1,579 Posts
#24
Banned
I have 2 bikes like that, but the use of a removable battery light , is needing a different mount than my wired to the Hub dynamo headlights.
https://www.cyclofiend.com/working/im...-4P1010009.jpg
Because the wheel is 10" smaller the fork crown mounted light on my Brompton is even lower..
...
https://www.cyclofiend.com/working/im...-4P1010009.jpg
Because the wheel is 10" smaller the fork crown mounted light on my Brompton is even lower..
...
Last edited by fietsbob; 01-07-18 at 01:14 PM.
#25
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,547
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18398 Post(s)
Liked 4,521 Times
in
3,359 Posts
What is your primary requirement of the lamp?
To see, or to be seen? Urban vs rural riding?
There are quite a few lamps that would qualify in the "be seen" category. I found these shoe lights, nothing to attach to your bike.
https://www.bikeforums.net/electroni...oe-lights.html
Helmet light? Perhaps designate one helmet as a "commuter helmet".
All of my current headlights and taillights that I am using are detachable. So, a quick flick of the rubber band, and they're off the bike. For theft prevention, I attach them to the bike when I need them, and remove them when I don't.
Various silicone rubber lamps can be easily attached to the fork, or wherever you wish.
To see, or to be seen? Urban vs rural riding?
There are quite a few lamps that would qualify in the "be seen" category. I found these shoe lights, nothing to attach to your bike.
https://www.bikeforums.net/electroni...oe-lights.html
Helmet light? Perhaps designate one helmet as a "commuter helmet".
All of my current headlights and taillights that I am using are detachable. So, a quick flick of the rubber band, and they're off the bike. For theft prevention, I attach them to the bike when I need them, and remove them when I don't.
Various silicone rubber lamps can be easily attached to the fork, or wherever you wish.