Chain replacement problem
#1
Senior Member
Thread Starter
Chain replacement problem
I changed the chain on my 2018 Domane SL 5 disc with 105 components. I installed an Ultegra chain. Now the chain makes noise and back pedaling is noisy and not smooth. Are the 105 comoponents not compatible with the Ultegra chain?
#2
Senior Member
Join Date: Jun 2015
Location: North Central Wisconsin
Posts: 4,668
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 3032 Post(s)
Liked 1,198 Times
in
781 Posts
Your chain isn't "worn in" with your cassette and chain ring so that is why you are hearing noise. If the noise doesn't go away after awhile then replace the cassette and possibly the chain ring. If the bike is 6 years old and has lots of miles, it may be time to do that anyway.
#3
Really Old Senior Member
I don't know know if it applies to your chain, but I believe some chains are "directional".
Likes For Bill Kapaun:
#5
aged to perfection
Join Date: Jun 2009
Location: PacNW
Posts: 1,852
Bikes: Dinucci Allez 2.0, Richard Sachs, Alex Singer, Serotta, Masi GC, Raleigh Pro Mk.1, Hetchins, etc
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 851 Post(s)
Liked 1,278 Times
in
674 Posts
agree on the above - by all means reverse the chain and see if that helps.
Also if your bike is a 1 by (Single chainring) there is a possibility that the narrow / wide teeth are not clocked correctly with regard to the chain.
not sure if that applies to your bike
/markp
Also if your bike is a 1 by (Single chainring) there is a possibility that the narrow / wide teeth are not clocked correctly with regard to the chain.
not sure if that applies to your bike
/markp
#6
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,691
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 4425 Post(s)
Liked 4,071 Times
in
2,714 Posts
As people have said some chains are directional but also if you put a new chain on a worn cassette it can also cause noise and shifting issues. Depending on wear it could be time for a new chainring as well. What I recommend is making sure the chain is on correctly but also you might replace that cassette and I would also remove your derailleurs and clean them well as well as chainring (if not need replacement) and just get your drivetrain nice and clean so you aren't wearing things out prematurely and you have better shifting.
#7
Senior Member
Join Date: Jul 2005
Location: Boulder County, CO
Posts: 4,410
Bikes: '80 Masi Gran Criterium, '12 Trek Madone, early '60s Frejus track
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 517 Post(s)
Liked 452 Times
in
339 Posts
Are you sure you threaded the chain on the correct side of the retention tab on the pivot arm of the rear derailleur?
Likes For oldbobcat:
#8
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,403
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6239 Post(s)
Liked 4,248 Times
in
2,382 Posts
Yup. Common mistake
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#9
Method to My Madness
Join Date: Nov 2020
Location: Orange County, California
Posts: 3,738
Bikes: Trek FX 2, Cannondale Synapse x2, Cannondale CAAD4, Santa Cruz Stigmata 3
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 2000 Post(s)
Liked 1,506 Times
in
1,045 Posts
#10
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 15,094
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6255 Post(s)
Liked 4,857 Times
in
3,347 Posts
As long as it's for the same number of speeds on the rear, 105, Ultegra and Dura Ace matches up in almost every case. The Shimano chains want the plates that have Shimano on them facing out to the right side of the bike. Doesn't matter if upside down or not.
Did you clean the cassette real well? Usually gunky cassettes are quieter. So maybe you are just hearing the sounds of cleanliness.
What's it doing when you backpedal? Have you looked at it while you are backpedaling? If the top run of chain is going slack that might be some other issues.
You sized the chain to the proper length?
Did you clean the cassette real well? Usually gunky cassettes are quieter. So maybe you are just hearing the sounds of cleanliness.
What's it doing when you backpedal? Have you looked at it while you are backpedaling? If the top run of chain is going slack that might be some other issues.
You sized the chain to the proper length?
#11
Senior Member
Thread Starter
I neglected to notice that I threaded the chain on top of the tab instead of under it. I rethreaded it correctly and now the crank turns smoothly without the problem noise. Thanks to all of you for getting me on the right track. I must have examined that darn derailleur a half dozen times and never noticed the problem.
Likes For jackb:
#12
Senior Member
Join Date: Apr 2007
Location: Ottawa, Canada
Posts: 778
Bikes: Raleigh Classic 15, 84; Miyata 912, 85; Miyata Ridge Runner SE, 85; Miyata 610, 86; Miyata 100M, 86; Miyata Valley Runner, 88; Miyata Triple Cross, 89; GT Karakoram, 90; Miyata Elevation 300, 91; Marinoni Touring, 95; Long Haul Trucker, 2013
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 160 Post(s)
Liked 134 Times
in
81 Posts
I've done that more often than I care to admit :-)
#15
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,691
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 4425 Post(s)
Liked 4,071 Times
in
2,714 Posts
I neglected to notice that I threaded the chain on top of the tab instead of under it. I rethreaded it correctly and now the crank turns smoothly without the problem noise. Thanks to all of you for getting me on the right track. I must have examined that darn derailleur a half dozen times and never noticed the problem.