Stop me from making a terrible mistake
#1
Trying to keep up
Thread Starter
Join Date: Jan 2007
Location: Fort Worth
Posts: 2,137
Bikes: Pinarello Prince, Orbea Onix, Ridley Fenix
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 79 Post(s)
Liked 136 Times
in
79 Posts
Stop me from making a terrible mistake
TL/DR I have a perfectly fine 2017 Ridley Fenix AL with 105, but I can't seem to stop looking at bikes with Di2 or Etap and disk brakes. Tell me I don't need it.
Longer version - I got my first real road bike about 23 years ago, a Bianchi Premio with downtube shifters. The next year I picked up a Fuji Team - the last model made from True Temper OX Gold steel. I rode that bike for a decade after switching the 8speed ultegra out for 9 speed. I put many, many miles on that bike. In 2007, I sold it (a terrible mistake), and replaced it with an Orbea Onyx, a bike I also loved. Again, many, many miles on that bike until my kids got old enough to start playing sports, then riding took a real back seat to attending their events. Fast forward to 3 years ago when the oldest kid inherited the Orbea (he's an excellent athlete; he cross trains on it), while I found the Ridley on clearance. I wasn't riding a ton and was more than happy with it. Fast forward to the present; I ride a little with both my kids, including the older son who is getting older and stronger (he's definitely stronger than I am). Starting in June, I began upping my mileage, and have really been putting in the kind of miles I did 20 years ago (actually more). While not the numbers some around here put in, I've been averaging 180 miles or so a week for the last few months.
Anyway, the Ridley is fine. It is comfy for long rides (did my first solo century in around 20 years Sunday), I upgraded the wheels (unnecessary), and 105 is perfectly good. The brakes and crank are not 105; the crank is fine; the brakes are meh, but that's an easy upgrade. The bike looks pretty good to my eye, and I have not seen another one like it around here (I still don't know what it was doing where I got it - a Performance store - for under $800 new). The fit is good - the frame is a little small, but I like a decent saddle to bar drop. If I were to get something new, I'd probably look to get a little more reach, but otherwise the fit is fine. So I know I don't need a new bike, but I bought this one as, at the time, I recognized that I didn't ride enough miles or fast enough to justify anything nicer. So I ignored the nicer bikes and went with it.
So I need the collective wisdom of this place, a place I used to frequent quite often back in its earlier days, to tell me that I don't need electronic shifting or disc brakes, and that my little aluminum Ridley with 105 and bargain basement Superteam carbon wheels is perfectly fine.
Longer version - I got my first real road bike about 23 years ago, a Bianchi Premio with downtube shifters. The next year I picked up a Fuji Team - the last model made from True Temper OX Gold steel. I rode that bike for a decade after switching the 8speed ultegra out for 9 speed. I put many, many miles on that bike. In 2007, I sold it (a terrible mistake), and replaced it with an Orbea Onyx, a bike I also loved. Again, many, many miles on that bike until my kids got old enough to start playing sports, then riding took a real back seat to attending their events. Fast forward to 3 years ago when the oldest kid inherited the Orbea (he's an excellent athlete; he cross trains on it), while I found the Ridley on clearance. I wasn't riding a ton and was more than happy with it. Fast forward to the present; I ride a little with both my kids, including the older son who is getting older and stronger (he's definitely stronger than I am). Starting in June, I began upping my mileage, and have really been putting in the kind of miles I did 20 years ago (actually more). While not the numbers some around here put in, I've been averaging 180 miles or so a week for the last few months.
Anyway, the Ridley is fine. It is comfy for long rides (did my first solo century in around 20 years Sunday), I upgraded the wheels (unnecessary), and 105 is perfectly good. The brakes and crank are not 105; the crank is fine; the brakes are meh, but that's an easy upgrade. The bike looks pretty good to my eye, and I have not seen another one like it around here (I still don't know what it was doing where I got it - a Performance store - for under $800 new). The fit is good - the frame is a little small, but I like a decent saddle to bar drop. If I were to get something new, I'd probably look to get a little more reach, but otherwise the fit is fine. So I know I don't need a new bike, but I bought this one as, at the time, I recognized that I didn't ride enough miles or fast enough to justify anything nicer. So I ignored the nicer bikes and went with it.
So I need the collective wisdom of this place, a place I used to frequent quite often back in its earlier days, to tell me that I don't need electronic shifting or disc brakes, and that my little aluminum Ridley with 105 and bargain basement Superteam carbon wheels is perfectly fine.
Likes For ericcox:
#2
Senior Member
Join Date: Nov 2017
Location: Seattle
Posts: 1,952
Bikes: Specialized Roubaix, Canyon Inflite AL SLX, Ibis Ripley AF, Priority Continuum Onyx, Santana Vision, Kent Dual-Drive Tandem
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 871 Post(s)
Liked 726 Times
in
436 Posts
Naw, just fix the angle on your tail light and keeping riding!
Why would getting a new bike be a terrible mistake? Is it an extravagance that doesn't fit in your budget? I can't think of any other reason it would be a mistake. But you might as well wait a bit longer for the 2021 bikes to trickle in, since both inventory and good riding weather days are dwindling this year.
Why would getting a new bike be a terrible mistake? Is it an extravagance that doesn't fit in your budget? I can't think of any other reason it would be a mistake. But you might as well wait a bit longer for the 2021 bikes to trickle in, since both inventory and good riding weather days are dwindling this year.
Likes For surak:
#3
Senior Member
Nice looking bike. How do you feel riding it? Does it make you feel good when you get out and ride? Does it put a smile on your face when you push yourself up those hills and hit better times for speed? Then it's fine. I have a Motobecane Sprintour with Ultegra caliper brakes (to match the entire drivetrain). I certainly look longingly at those titanium bikes with disc brakes. But I have no need to upgrade at the moment. I'd only upgrade if I felt the bike was holding me back in some way. Mine isn't. And disc brakes won't impact how well I ride one bit. Just ride and be happy.
Last edited by MntnMan62; 09-09-20 at 07:50 PM.
Likes For MntnMan62:
#4
Senior Member
You don't need electronic shifting.
But you'll want it!
Have you tried it out yet? If not, you really wouldn't know what you're missing which is great because frankly, it's probably not much unless you really care about how it feels to switch gears. I've also heard that 105 and Dura-Ace is basically indistinguishable unless you go electronic so you've pretty much got as good as it'll get in terms of switching.
Disc brakes are also not necessary but you may want to consider them for your next bike or if you're going to drop money on expensive wheels.
If you want to adjust your reach, maybe just swap out the stem? As for a new bike, that doesn't need to get justified. Just get it if you can afford it and want it. surak makes a good point though: if you do go the new route, I'd wait a bit for the new models or for the current ones to go on sale.
But you'll want it!
Have you tried it out yet? If not, you really wouldn't know what you're missing which is great because frankly, it's probably not much unless you really care about how it feels to switch gears. I've also heard that 105 and Dura-Ace is basically indistinguishable unless you go electronic so you've pretty much got as good as it'll get in terms of switching.
Disc brakes are also not necessary but you may want to consider them for your next bike or if you're going to drop money on expensive wheels.
If you want to adjust your reach, maybe just swap out the stem? As for a new bike, that doesn't need to get justified. Just get it if you can afford it and want it. surak makes a good point though: if you do go the new route, I'd wait a bit for the new models or for the current ones to go on sale.
Likes For mattscq:
#5
Trying to keep up
Thread Starter
Join Date: Jan 2007
Location: Fort Worth
Posts: 2,137
Bikes: Pinarello Prince, Orbea Onix, Ridley Fenix
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 79 Post(s)
Liked 136 Times
in
79 Posts
Naw, just fix the angle on your tail light and keeping riding!
Why would getting a new bike be a terrible mistake? Is it an extravagance that doesn't fit in your budget? I can't think of any other reason it would be a mistake. But you might as well wait a bit longer for the 2021 bikes to trickle in, since both inventory and good riding weather days are dwindling this year.
Why would getting a new bike be a terrible mistake? Is it an extravagance that doesn't fit in your budget? I can't think of any other reason it would be a mistake. But you might as well wait a bit longer for the 2021 bikes to trickle in, since both inventory and good riding weather days are dwindling this year.
Nice looking bike. How do you feel riding it? Does it make you feel good when you get out and ride? Does it put a smile on your face when you push yourself up those hills and hit better times for speed? Then it's fine. I have a Motobecane Sprintour with Ultegra brakes (to match the entire drivetrain). I certainly look longingly at those titanium bikes with disc brakes. But I have no need to upgrade at the moment. I'd only upgrade if I felt the bike was holding me back in some way. Mine isn't. And disc brakes won't impact how well I ride one bit. Just ride and be happy.
#6
Trying to keep up
Thread Starter
Join Date: Jan 2007
Location: Fort Worth
Posts: 2,137
Bikes: Pinarello Prince, Orbea Onix, Ridley Fenix
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 79 Post(s)
Liked 136 Times
in
79 Posts
You don't need electronic shifting.
But you'll want it!
Have you tried it out yet? If not, you really wouldn't know what you're missing which is great because frankly, it's probably not much unless you really care about how it feels to switch gears. I've also heard that 105 and Dura-Ace is basically indistinguishable unless you go electronic so you've pretty much got as good as it'll get in terms of switching.
Disc brakes are also not necessary but you may want to consider them for your next bike or if you're going to drop money on expensive wheels.
If you want to adjust your reach, maybe just swap out the stem? As for a new bike, that doesn't need to get justified. Just get it if you can afford it and want it. surak makes a good point though: if you do go the new route, I'd wait a bit for the new models or for the current ones to go on sale.
But you'll want it!
Have you tried it out yet? If not, you really wouldn't know what you're missing which is great because frankly, it's probably not much unless you really care about how it feels to switch gears. I've also heard that 105 and Dura-Ace is basically indistinguishable unless you go electronic so you've pretty much got as good as it'll get in terms of switching.
Disc brakes are also not necessary but you may want to consider them for your next bike or if you're going to drop money on expensive wheels.
If you want to adjust your reach, maybe just swap out the stem? As for a new bike, that doesn't need to get justified. Just get it if you can afford it and want it. surak makes a good point though: if you do go the new route, I'd wait a bit for the new models or for the current ones to go on sale.
#7
Senior Member
Join Date: Oct 2008
Location: Portland, OR
Posts: 3,842
Bikes: Trek Domane SL6 Gen 3, Soma Fog Cutter, Focus Mares AL, Detroit Bikes Sparrow FG, Volae Team, Nimbus MUni
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 896 Post(s)
Liked 2,062 Times
in
1,080 Posts
Take your dream bike for a test ride. It will either do it for you, or it won't.
This spring I rode an All City Space Horse, which had the features on my list, and was sold on the ride within two blocks. I ended up building up my own bike. After the first ride on my build, I knew I'd never ride the old bike again.
This spring I rode an All City Space Horse, which had the features on my list, and was sold on the ride within two blocks. I ended up building up my own bike. After the first ride on my build, I knew I'd never ride the old bike again.
Likes For downtube42:
#8
Senior Member
I've tried Di2 - I like it. The 105 is very nice - I'm not complaining. Definitely not a need. I am likely to replace the stem and drop it a little (I have a few spacers I can remove) as I continue to get in better shape. I'm also looking at getting a power meter - probably pedal based. Whenever I get something new, whether it is 2 months, next year, or 5 years from now, it will likely have disc brakes. My youngest son's bike has mechanical disks. I really wanted them the other day when I was caught out in a surprise rain storm. The rim brakes are fine, but the discs are just more sure.
I do hate that wet disc squeal but I'm sure glad that I'm running discs when I did my first descent on carbon rims. A powermeter is great. I got a single-sided crank based meter and I think some bike manufacturers (Canyon comes to mind) have begun to include powermeters in some of their configurations. I'm hoping that they become more or less standard on mid-to-top tier bikes going forward.
Likes For mattscq:
#9
Senior Member
Join Date: Aug 2009
Location: Minneapolis
Posts: 5,751
Bikes: 2022 Salsa Beargrease Carbon Deore 11, 2020 Salsa Warbird GRX 600, 2020 Canyon Ultimate CF SLX disc 9.0 Di2, 2020 Catrike Eola, 2016 Masi cxgr, 2011, Felt F3 Ltd, 2010 Trek 2.1, 2009 KHS Flite 220
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 4383 Post(s)
Liked 3,016 Times
in
1,865 Posts
How much do you ride? Do you already have a spare bike for when your main bike can't be ridden? Or a rain bike?
If you ride a lot, buy another bike. You'll love them both and you'll find different rides/purposes for each.
If you ride a lot, buy another bike. You'll love them both and you'll find different rides/purposes for each.
Likes For MinnMan:
Likes For Rides4Beer:
Likes For walnutz:
Likes For topflightpro:
#13
Senior Member
Join Date: Jun 2002
Location: Montreal, Quebec
Posts: 5,925
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1818 Post(s)
Liked 1,693 Times
in
974 Posts
The one thing I would do would be to deal with the brakes. A set of 105 or even Ultegra brake callipers would be a noticeable upgrade at a fairly low cost. If that isn't enough, the crank would be another step you could take. Cranks and brakes are areas where bike makers often skimp to maintain price points and where upgrades make good sense
#14
Senior Member
There's no reason to have rim brake problems. Carbon fiber wheels need special pads, and even then, the braking may not be near as good as an aluminum rim. I have two rim brake bikes that are only two years old. I have Campy chorus brakes and high quality Campy Zonda aluminum rim wheels that brake great, even on high speed mountain descents. No CF rims for me.
You can read long debate threads on the pros and cons of disc brakes on this forum. One common theme is more maintenance to bleed lines and occasionally change fluid. My rim brake pads easily last 12,000 miles and I rarely have to do any maintenance or adjustment.
Di2 is the lowest priced and most common electronic shifting, but still 11 speed. Sram AXS 12 will cost significantly more. It won't be long before shimano follows with a major change to new hubs and 12 speed.
You can read long debate threads on the pros and cons of disc brakes on this forum. One common theme is more maintenance to bleed lines and occasionally change fluid. My rim brake pads easily last 12,000 miles and I rarely have to do any maintenance or adjustment.
Di2 is the lowest priced and most common electronic shifting, but still 11 speed. Sram AXS 12 will cost significantly more. It won't be long before shimano follows with a major change to new hubs and 12 speed.
Last edited by DaveSSS; 09-10-20 at 08:21 AM.
#15
LBKA (formerly punkncat)
Join Date: Jan 2010
Location: Jawja
Posts: 4,299
Bikes: Spec Roubaix SL4, GT Traffic 1.0
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 2208 Post(s)
Liked 960 Times
in
686 Posts
You never need a solid reason for N+1, it's a good choice all on it's own. Not to mention those pesky fit issues.
My concern right this moment would be availability...but I also ride a very common size.
My concern right this moment would be availability...but I also ride a very common size.
Likes For noodle soup:
#17
Full Member
Join Date: Aug 2002
Location: Springdale, Arkansas
Posts: 318
Bikes: 2021 Trek Domane SLR7 Project One 62cm- 2010 Specialized Allez 61cm
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 118 Post(s)
Liked 88 Times
in
44 Posts
You do realize that you're in a nut-house rehabilitation facility for bicycle addicts who have been unsuccessful in their treatment, right?
Hard to argue with N+1 if its not a burden financially.
Glenn
Hard to argue with N+1 if its not a burden financially.
Glenn
Likes For GAtkins:
#18
Senior Member
Join Date: Nov 2015
Posts: 8,922
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 4717 Post(s)
Liked 1,882 Times
in
998 Posts
SRAM hydraulic brakes are a little more problematic, but they are getting better
#19
• —
Join Date: Jun 2015
Location: Land of Pleasant Living
Posts: 12,230
Bikes: Shmikes
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 10165 Post(s)
Liked 5,852 Times
in
3,152 Posts
The whole maintenance issue is way overblow(at least for Shimano hydraulic discs). the shop I work at sells a boatload of Shimano disc bikes, and we rarely have any bike that need to be bled after they are sold. Replacing pads and rotors is a simple job that any home mechanic can do,
SRAM hydraulic brakes are a little more problematic, but they are getting better
SRAM hydraulic brakes are a little more problematic, but they are getting better
What's the recommended brake fluid change interval for passenger cars with their hygroscopic fluid, many tube couplings, and constant, all-weather use? 4 yrs? 5 yrs?
#20
Senior Member
Join Date: Aug 2004
Location: Prague, Czech Republic
Posts: 2,751
Bikes: Merlin Extra Light, Orbea Orca, Ritchey Outback,Tomac Revolver Mountain Bike, Cannondale Crit 3.0 now used for time trials.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 126 Post(s)
Liked 55 Times
in
34 Posts
Stop looking at other bikes and look up the road and enjoy your ride.
Likes For Fox Farm:
#21
Senior Member
Join Date: Sep 2005
Location: In the foothills of Los Angeles County
Posts: 25,281
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 8275 Post(s)
Liked 9,031 Times
in
4,471 Posts
Some car makers recommend fluid replacement, some don't. I've been riding hydraulic disc mtbs for 12 years and have never bled the brakes on either of them.
Likes For big john:
#22
Senior Member
I don't have disk brakes but I have Red eTap and a Mechanical Ultegra 8000. So yeah, I'm sold on electronic shifting.
If ever I'm going to get a new bike, I'd probably get this one --> https://22bicycles.com/blogs/news/in...coupler-system
It has everything I want (electronic shifting + disk brakes + coupler + titanium).
You don't need it but you know you want it......YOLO!!!
If ever I'm going to get a new bike, I'd probably get this one --> https://22bicycles.com/blogs/news/in...coupler-system
It has everything I want (electronic shifting + disk brakes + coupler + titanium).
You don't need it but you know you want it......YOLO!!!
Likes For ARPRINCE:
#23
Trying to keep up
Thread Starter
Join Date: Jan 2007
Location: Fort Worth
Posts: 2,137
Bikes: Pinarello Prince, Orbea Onix, Ridley Fenix
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 79 Post(s)
Liked 136 Times
in
79 Posts
My reality is that I will likely upgrade the brakes at some point (they work ok, yes I'm using carbon pads, but an easy upgrade). I am likely to avoid n+1 until the next big Shimano makeover. Unless I find that great deal on a bike I want. Now, do I want steel, ti, or CF?
Likes For ericcox:
#24
Full Member
Join Date: Jul 2020
Location: Ellay
Posts: 340
Bikes: 2002 Eddy Merckx Team SC Resto-Mod; 2019 Ibis Hakka MX; 2017 Spot Brand Ajax Belt Drive
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 169 Post(s)
Liked 192 Times
in
121 Posts
Here's how I look at it:
• Disk brakes won't make you faster unless you are having to descend lots of steep mountains very slowly with your current brakes or frequently have problems braking in the rain.
• Di2 won't make you any faster unless you are racing and missing shifts with your current system that are causing you to get dropped
So, unless you fit one of the 2 above exceptions, you'd just be getting a new bike because you want it. There's nothing wrong with that (so long as you can afford it), but don't expect much improvement in your riding.
• Disk brakes won't make you faster unless you are having to descend lots of steep mountains very slowly with your current brakes or frequently have problems braking in the rain.
• Di2 won't make you any faster unless you are racing and missing shifts with your current system that are causing you to get dropped
So, unless you fit one of the 2 above exceptions, you'd just be getting a new bike because you want it. There's nothing wrong with that (so long as you can afford it), but don't expect much improvement in your riding.
#25
Senior Member
Join Date: Nov 2013
Location: Richfield, WI
Posts: 714
Bikes: Trek Domane SL7 Disc, Cannondale F29
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 387 Post(s)
Liked 323 Times
in
184 Posts
ericcox Your Ridley could probably outlast you if you'd let it Do you ride 100% road rides on asphalt? If so, keep the Ridley and throw your extra money into your 401k or something.
However, if you enjoy riding other surfaces like gravel trails, gravel roads, or even mild off-roading, disc brakes open-up the possibility of having either different wheel sets for different terrain or just getting wider rims and tires in general. If I'm not mistaken, most rim brakes limit your tire size to 25-28mm wide tires. I've been riding 32mm tires on 25mm wide rims (wide rims are kind of new-ish in the roadie world as of late) and love, love, love the combination which wouldn't be possible on a rim brake bike. (Did I mention I love my wheels and tires? ) I also have a second wheel set with 38mm wide and mildly grippy tires for gravel riding.
As for electronic shifting, it won't make you a better person, but... Oh who am I kidding, I think I am a better person since I finally got Ultegra Di2 this year. Electronic shifting has a slew of nifty features and benefits, none of which you need but you'll be glad you have once you have 'em!