Cycling is Destroying my Pants. Help!
#1
Senior Member
Thread Starter
Join Date: Dec 2015
Location: Buffalo, NY
Posts: 619
Bikes: Kona Kahuna DL Drop Bar - Sensah SRX Pro 1x11 (2012 Frame), Giant Toughroad GX 1 - Shimano Road Hydro + SLX 1x10 (2018), Diamondback Sync'r - SRAM NX 1x12 (2020)
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 160 Post(s)
Liked 97 Times
in
54 Posts
Cycling is Destroying my Pants. Help!
Ever since I started cycling a few years back, my pants started to look like this:
I have many more pants that have been worn out like this, and I’m struggling to find if there is any solution that will allow me to continue riding with regular pants. I typically ride in casual/work pants during the week on breaks, but even if it’s for a few minutes it seems like I’m wearing out my pants still.
I have different saddles like Specialized Power and Brooks C17 where I’ve worn or ripped pants by the saddle. I didn’t know if I was putting more pressure on my saddle due to my weight causing my pants to wear. I could try a wider saddle (currently using ~155mm saddles). Otherwise I basically can’t ride my bike until the weekends...
I have many more pants that have been worn out like this, and I’m struggling to find if there is any solution that will allow me to continue riding with regular pants. I typically ride in casual/work pants during the week on breaks, but even if it’s for a few minutes it seems like I’m wearing out my pants still.
I have different saddles like Specialized Power and Brooks C17 where I’ve worn or ripped pants by the saddle. I didn’t know if I was putting more pressure on my saddle due to my weight causing my pants to wear. I could try a wider saddle (currently using ~155mm saddles). Otherwise I basically can’t ride my bike until the weekends...
#2
Tortoise Wins by a Hare!
Join Date: Feb 2006
Location: Looney Tunes, IL
Posts: 7,398
Bikes: Wabi Special FG, Raleigh Roper, Nashbar AL-1, Miyata One Hundred, '70 Schwinn Lemonator and More!!
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 1549 Post(s)
Liked 941 Times
in
504 Posts
I'm sure some posters who are actually helpful will come along soon, but in the meantime...
#3
Senior Member
Join Date: Oct 2015
Location: San Diego, California
Posts: 4,077
Bikes: Velo Orange Piolet
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 2228 Post(s)
Liked 2,011 Times
in
972 Posts
My pants tend to rip just like that too. Pants are basically bicycle disposables for me.
I bet a smooth leather B17 would be a little less hard on pants than a C17 (just a guess I haven't tried any of the "C" models).
I bet a smooth leather B17 would be a little less hard on pants than a C17 (just a guess I haven't tried any of the "C" models).
#4
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,845
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2338 Post(s)
Liked 2,822 Times
in
1,541 Posts
bike shorts, if you are doing the mileage to do that, get bike shorts (added benefit is you don't catch your shorts on the saddle .....not that I have ever done that with loose shorts )
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Likes For squirtdad:
#5
Newbie
Shorts defiantly help, hiking pants work great for riding, lightweight and stretchable. REI Sahara I use. Specialized has cycling pants, I'm sure others do too.
#6
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,547
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18375 Post(s)
Liked 4,510 Times
in
3,352 Posts
I wear jeans most of the time. Cycling shorts some of the time.
I don't think I've ever worn out the seat of a good pair of jeans. Knees, thighs, but not seats.
I don't think I've ever worn out the seat of a good pair of jeans. Knees, thighs, but not seats.
#7
Senior Member
Join Date: Dec 2010
Location: northern Deep South
Posts: 8,903
Bikes: Fuji Touring, Novara Randonee
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 2604 Post(s)
Liked 1,931 Times
in
1,212 Posts
I wore out a couple pairs of cutoff blue jean shorts riding bikes, so it can be done.
I'll second or third the idea of bike shorts. It only takes a few minutes to change when you get where you're going. If you're too shy for the spandex crowd, get some mountain bike shorts instead.
I'll second or third the idea of bike shorts. It only takes a few minutes to change when you get where you're going. If you're too shy for the spandex crowd, get some mountain bike shorts instead.
#8
Senior Member
Thread Starter
Join Date: Dec 2015
Location: Buffalo, NY
Posts: 619
Bikes: Kona Kahuna DL Drop Bar - Sensah SRX Pro 1x11 (2012 Frame), Giant Toughroad GX 1 - Shimano Road Hydro + SLX 1x10 (2018), Diamondback Sync'r - SRAM NX 1x12 (2020)
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 160 Post(s)
Liked 97 Times
in
54 Posts
Unfortunately I don't really have the option to change on breaks. I'm also around a size 48-50 waist so that severely limits my pants choices. It sucks because riding for 10 mins on breaks helps me de-stress quite a bit. I even have a pair of pants that I ONLY wear for work that I never ride in for longer than 10 mins either on break or after work that ended up tearing and I would say that I rode my bike with those pants on only about a handful of times.
#9
Senior Member
Looks like you need to consider trying to find different pants materials if they're not lasting long. Those 1st 2 pics look more like a lack of material strength rather than then specifically wearing out. Also consider wearing mtb liner shorts or "shy shorts" if you don't already. They may allow your clothing freer movement and less wear
#10
Banned
Jersey is a knit fabric
I'm into polyester track suit warm up over-trousers these days , not woven cotton.
#11
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,362
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6219 Post(s)
Liked 4,218 Times
in
2,365 Posts
Just got to say: I don’t wear Lycra because I look good in it. True bike shorts wear like iron. I’ve got shorts that are over 10 years old and have been ridden hard.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#12
Senior Member
Join Date: Sep 2009
Location: Up
Posts: 4,695
Bikes: Masi, Giant TCR, Eisentraut (retired), Jamis Aurora Elite, Zullo, Cannondale, 84 & 93 Stumpjumpers, Waterford, Tern D8, Bianchi, Gunner Roadie, Serotta, Serotta Duette, was gifted a Diamond Back
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 305 Post(s)
Liked 2,038 Times
in
604 Posts
I did a search for commuter cycling pants and it came up with a few different brands. I haven't tried any of them but Chrome is one that I am familiar with.
#14
Senior Member
Thread Starter
Join Date: Dec 2015
Location: Buffalo, NY
Posts: 619
Bikes: Kona Kahuna DL Drop Bar - Sensah SRX Pro 1x11 (2012 Frame), Giant Toughroad GX 1 - Shimano Road Hydro + SLX 1x10 (2018), Diamondback Sync'r - SRAM NX 1x12 (2020)
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 160 Post(s)
Liked 97 Times
in
54 Posts
#16
Senior Member
Thread Starter
Join Date: Dec 2015
Location: Buffalo, NY
Posts: 619
Bikes: Kona Kahuna DL Drop Bar - Sensah SRX Pro 1x11 (2012 Frame), Giant Toughroad GX 1 - Shimano Road Hydro + SLX 1x10 (2018), Diamondback Sync'r - SRAM NX 1x12 (2020)
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 160 Post(s)
Liked 97 Times
in
54 Posts
No I’m not trying to find casual pants primarily dedicated to cycling, but when I’m not in a position to change to cycling specific clothing, I don’t want to avoid getting on my bike because I’m worried about wearing out the pants that I’m currently wearing.
#17
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,373
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2482 Post(s)
Liked 2,953 Times
in
1,678 Posts
The solution: wear synthetic material, not cotton. Lightweight fleece pants can last years of daily cycling. Some cotton/synthetic blends can last somewhat longer than 100% cotton.
Here are some loose-fitting Champion cotton/synthetic blend pants. The Kohl's page I linked to is for 3XL pants---waist 48 to 50, according to Champion's sizing. Inexpensive and pretty durable for bike riding. The material is a bit thin, so I'd suggest wearing cycling undershorts with a bit of padding under them, but try them as is first.
But for the most durable pants, go 100% polyester. I searched the Champion website for "men's 100% polyester pants 3XL." Here's what came up. There are probably other brands that offer similar products. Champion just happens to be the brand I'm familiar with.
Here are some loose-fitting Champion cotton/synthetic blend pants. The Kohl's page I linked to is for 3XL pants---waist 48 to 50, according to Champion's sizing. Inexpensive and pretty durable for bike riding. The material is a bit thin, so I'd suggest wearing cycling undershorts with a bit of padding under them, but try them as is first.
But for the most durable pants, go 100% polyester. I searched the Champion website for "men's 100% polyester pants 3XL." Here's what came up. There are probably other brands that offer similar products. Champion just happens to be the brand I'm familiar with.
Last edited by Trakhak; 06-14-20 at 06:37 AM.
Likes For Trakhak:
#18
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,362
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6219 Post(s)
Liked 4,218 Times
in
2,365 Posts
Okay well I’m definitely annoyed with the condescending “advice”. The point of me posting in the Clyde sub-forum was to see if anyone else like me has had these issues. The fact is most, if not all cycling specific casual pants aren’t made in larger sizes. And since most other pants aren’t “designed” for cycling in mind, I wouldn’t even know what to look for on my own.
To be at least a little helpful, you might try Love2Pedal. They have many large sizes in nonLycra shorts. You might consider these guys. They seem to have nonpadded as well.
I would definitely stay away from cottons and cotton blends. They are just too soft. Perhaps look at what Carhartt has to offer. This convertible pant is largely synthetic, this one is 100% nylon, and this one, although mostly cotton, is durable because of the ripstop. You might want to look at convertible hiking pants at REI. They tend to be high nylon content and are quite durable.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#19
Senior Member
Thread Starter
Join Date: Dec 2015
Location: Buffalo, NY
Posts: 619
Bikes: Kona Kahuna DL Drop Bar - Sensah SRX Pro 1x11 (2012 Frame), Giant Toughroad GX 1 - Shimano Road Hydro + SLX 1x10 (2018), Diamondback Sync'r - SRAM NX 1x12 (2020)
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 160 Post(s)
Liked 97 Times
in
54 Posts
The solution: wear synthetic material, not cotton. Lightweight fleece pants can last years of daily cycling. Some cotton/synthetic blends can last somewhat longer than 100% cotton.
Here are some loose-fitting Champion cotton/synthetic blend pants. The Kohl's page I linked to is for 3XL pants---waist 48 to 50, according to Champion's sizing. Inexpensive and pretty durable for bike riding. The material is a bit thin, so I'd suggest wearing cycling undershorts with a bit of padding under them, but try them as is first.
But for the most durable pants, go 100% polyester. I searched the Champion website for "men's 100% polyester pants 3XL." Here's what came up. There are probably other brands that offer similar products. Champion just happens to be the brand I'm familiar with.
Here are some loose-fitting Champion cotton/synthetic blend pants. The Kohl's page I linked to is for 3XL pants---waist 48 to 50, according to Champion's sizing. Inexpensive and pretty durable for bike riding. The material is a bit thin, so I'd suggest wearing cycling undershorts with a bit of padding under them, but try them as is first.
But for the most durable pants, go 100% polyester. I searched the Champion website for "men's 100% polyester pants 3XL." Here's what came up. There are probably other brands that offer similar products. Champion just happens to be the brand I'm familiar with.
Then you probably want to consider pants with a high percentage of nylon. That's what gives bicycle shorts their durability. It's not the Lycra...it's only there for stretch...but the tough polyamide fibers that make them wear longer. Most people don't like the feel of nylon too much as it is rather slick and not really breathable. But if you want clothes that are going to last up to the constant rubbing against the saddle, you probably want nylon.
I would definitely stay away from cottons and cotton blends. They are just too soft. Perhaps look at what Carhartt has to offer. This convertible pant is largely synthetic, this one is 100% nylon, and this one, although mostly cotton, is durable because of the ripstop. You might want to look at convertible hiking pants at REI. They tend to be high nylon content and are quite durable.
I would definitely stay away from cottons and cotton blends. They are just too soft. Perhaps look at what Carhartt has to offer. This convertible pant is largely synthetic, this one is 100% nylon, and this one, although mostly cotton, is durable because of the ripstop. You might want to look at convertible hiking pants at REI. They tend to be high nylon content and are quite durable.
#20
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,373
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2482 Post(s)
Liked 2,953 Times
in
1,678 Posts
Good luck in your search. I was very happy when I finally found loose-fitting, durable pants.
One other suggestion: since synthetic pants tend to have a slicker finish than cotton and thus tend to ride down your butt while you're cycling, you might want to pick up some good-quality suspenders. I don't bother with suspenders for short neighborhood shopping rides, but anything more than a couple of miles and I use my pants with the suspenders.
One other suggestion: since synthetic pants tend to have a slicker finish than cotton and thus tend to ride down your butt while you're cycling, you might want to pick up some good-quality suspenders. I don't bother with suspenders for short neighborhood shopping rides, but anything more than a couple of miles and I use my pants with the suspenders.
#21
Senior Member
Join Date: Sep 2014
Location: Boston
Posts: 927
Bikes: Death machines all
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 297 Post(s)
Liked 86 Times
in
63 Posts
Nylon blend hiking shorts and pants, with padded liners under ( reduces stray pressure spots). Hiking pants have a wide size range
#22
Senior Member
Thread Starter
Join Date: Dec 2015
Location: Buffalo, NY
Posts: 619
Bikes: Kona Kahuna DL Drop Bar - Sensah SRX Pro 1x11 (2012 Frame), Giant Toughroad GX 1 - Shimano Road Hydro + SLX 1x10 (2018), Diamondback Sync'r - SRAM NX 1x12 (2020)
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 160 Post(s)
Liked 97 Times
in
54 Posts
Thanks to everyone who gave suggestions on pants and materials to look for. I was able to get some pants that work very well and I was also able to find some casual pants that are made of stronger material (wool/polyester) that I’m more confident in them holding up better.