Paul Components Crankset fit.
#1
Junior Member
Thread Starter
Paul Components Crankset fit.
Ok so im slowly getting my bike build together and own a Paul Comp Crankset.
with that being said I've had to learn that not all bike parts fit on every bike lol.
I have a wabi special and was curious if the Pauls would work properly and what BB would i need or should get.
thanks.
with that being said I've had to learn that not all bike parts fit on every bike lol.
I have a wabi special and was curious if the Pauls would work properly and what BB would i need or should get.
thanks.
#2
Your cog is slipping.
The Paul crankset uses a 111mm ISO square taper bottom bracket. Campagnolo Record Pista or Sugino 75 cartridge will work. Phil Wood also makes a 110.5mm ISO option that will work.
In my experience Wabi frames don't play nicely with a lot of cranksets. Unfortunately, you won't know until you try.
In my experience Wabi frames don't play nicely with a lot of cranksets. Unfortunately, you won't know until you try.
Likes For Scrodzilla: