Go Back  Bike Forums > Bike Forums > General Cycling Discussion
Reload this Page >

School me on tooth difference in performance

Notices
General Cycling Discussion Have a cycling related question or comment that doesn't fit in one of the other specialty forums? Drop on in and post in here! When possible, please select the forum above that most fits your post!

School me on tooth difference in performance

Old 07-15-19, 04:51 PM
  #1  
Digger Goreman
Quidam Bike Super Hero
Thread Starter
 
Digger Goreman's Avatar
 
Join Date: Jan 2019
Location: Stone Mountain, GA (Metro Atlanta, East)
Posts: 1,150

Bikes: 1995 Trek 800 Sport, aka, "CamelTrek"

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 331 Post(s)
Liked 415 Times in 282 Posts
School me on tooth difference in performance

Just replaced a triple ring 28/38/48 with a triple 22/32/42.... Haven't put my bike through the paces yet. What can I expect and why? Make the explanation as semi-technical as you like... I enjoy learning new things, especially on my bike!
Digger Goreman is offline  
Old 07-15-19, 06:22 PM
  #2  
shelbyfv
Expired Member
 
shelbyfv's Avatar
 
Join Date: Jun 2007
Location: TN
Posts: 11,461
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3638 Post(s)
Liked 5,316 Times in 2,701 Posts
Your bike will be easier to pedal.
shelbyfv is offline  
Likes For shelbyfv:
Old 07-15-19, 06:36 PM
  #3  
Mountain Mitch
Senior Member
 
Mountain Mitch's Avatar
 
Join Date: Sep 2012
Location: Back-of-beyond, Kootenays, BC
Posts: 741

Bikes: Specialized Roubaix Exp ert Road and Specialized Stump Jumper FS Mountain; De Vinci Caribou touring, Intense Tracer T275c, Cramerotti, Specialized Allez, Condor

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 162 Post(s)
Liked 89 Times in 53 Posts
☝️ I agree!

Every time you pedal a circle you move the bike ‘X’ teeth. So with your new gearing you will move the bike fewer ‘teeth’ than with your former chain ring. Now, of course, that also depends on your cassette, but since you don’t say you have changed that it should be irrelevant.

If the gear on you are using on your cassette has 24 teeth then with every cycle the old chain ring (large gear) would rotate the tires 48/24 or 2Xs. The new one will rotate the tires 42/24 or 1.75Xs. Less distance equals less effort.
Mountain Mitch is offline  
Old 07-15-19, 07:05 PM
  #4  
Slightspeed
Senior Member
 
Slightspeed's Avatar
 
Join Date: Apr 2017
Location: Los Angeles, CA
Posts: 2,257

Bikes: 1964 Legnano Roma Olympiade, 1973 Raleigh Super Course, 1978 Raleigh Super Course, 1978 Peugeot PR10, 2002 Specialized Allez, 2007 Specialized Roubaix, 2013 Culprit Croz Blade

Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 741 Post(s)
Liked 817 Times in 420 Posts
It will easier to pedal up hills, but on flat roads you will go slower with similar effort.
Slightspeed is offline  
Old 07-15-19, 07:34 PM
  #5  
CycleryNorth81
Senior Member
 
Join Date: Jun 2014
Posts: 877

Bikes: custom Cyclery North (Chicago), Schwinn Circuit

Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 350 Post(s)
Liked 203 Times in 118 Posts
28/38/48= 0.015
22/32/42= 0.016

Difference of one thousanth.
CycleryNorth81 is offline  
Old 07-15-19, 07:47 PM
  #6  
Shimagnolo
Senior Member
 
Shimagnolo's Avatar
 
Join Date: May 2008
Location: Zang's Spur, CO
Posts: 9,086
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3355 Post(s)
Liked 5,434 Times in 2,812 Posts
Lemme get this straight:
The OP substituted smaller chainrings, having no idea what difference will be?
Shimagnolo is offline  
Old 07-15-19, 09:25 PM
  #7  
Digger Goreman
Quidam Bike Super Hero
Thread Starter
 
Digger Goreman's Avatar
 
Join Date: Jan 2019
Location: Stone Mountain, GA (Metro Atlanta, East)
Posts: 1,150

Bikes: 1995 Trek 800 Sport, aka, "CamelTrek"

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 331 Post(s)
Liked 415 Times in 282 Posts
Originally Posted by Shimagnolo
Lemme get this straight:
The OP substituted smaller chainrings, having no idea what difference will be?
Ignorance is bliss, and I'm a happy man!
Digger Goreman is offline  
Likes For Digger Goreman:
Old 07-15-19, 09:48 PM
  #8  
mihlbach
Senior Member
 
mihlbach's Avatar
 
Join Date: Dec 2005
Location: Long Island, NY
Posts: 6,643
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 125 Times in 67 Posts
If the gear ratios you mostly find yourself using are within the overlap between your old and new crankset, you won’t notice any difference.
mihlbach is offline  
Old 07-15-19, 10:40 PM
  #9  
wipekitty
vespertine member
 
wipekitty's Avatar
 
Join Date: Jul 2013
Location: Land of Angora, Turkey
Posts: 2,476

Bikes: Yes

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 687 Post(s)
Liked 220 Times in 163 Posts
You'll have easier gearing for going up hills in the small chainring, but assuming the same rear cassette (gearing), you will have to spin very quickly to make the bike go the same speed in the big chainring.

I enjoy numbers, and there are a few gear calculators that can give you additional data using chainring and cassette sizes. First, this one (https://www.bikecalc.com) gives you a bunch of information, including the useful speed at cadence, or how fast the bike will go given the RPM of your pedaling. Green combinations are faster/harder to pedal; red combinations are slower/easier to pedal.

There's also the Sheldon Brown gear calculator (https://www.sheldonbrown.com/gear-calc.html) which provides the very interesting meters of development - how far your bike will travel forward with each rotation of the pedals. You can do some math and, for example, calculate how many times you'll need to turn the pedals per mile in each gear. This is probably useful only if you're on long solo rides and need something to focus on while passing the time.
wipekitty is offline  
Old 07-15-19, 11:05 PM
  #10  
CliffordK
Senior Member
 
CliffordK's Avatar
 
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,600
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18320 Post(s)
Liked 4,489 Times in 3,338 Posts
Originally Posted by Digger Goreman
School me on tooth difference in performance
The fewer front teeth that remain... is indicative of pushing the performance envelope just a little too far.
CliffordK is offline  
Old 07-16-19, 06:01 AM
  #11  
JonathanGennick 
Senior Member
 
JonathanGennick's Avatar
 
Join Date: Apr 2007
Location: Munising, Michigan, USA
Posts: 4,131

Bikes: Priority 600, Priority Continuum, Devinci Dexter

Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 685 Post(s)
Likes: 0
Liked 55 Times in 37 Posts
Originally Posted by Digger Goreman
Just replaced a triple ring 28/38/48 with a triple 22/32/42.... Haven't put my bike through the paces yet. What can I expect and why?
Your lowest gear combination will be easier to pedal than before. Your highest gear combination will be easier to pedal than before. Why? Because, you changed your gearing .
JonathanGennick is offline  
Old 07-16-19, 08:32 AM
  #12  
mstateglfr 
Sunshine
 
mstateglfr's Avatar
 
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,538

Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo

Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10902 Post(s)
Liked 7,393 Times in 4,148 Posts
Originally Posted by Digger Goreman
Ignorance is bliss, and I'm a happy man!
Hopefully you dropped the front derailleur down a bit too since thats kinda pretty important.
mstateglfr is offline  
Likes For mstateglfr:
Old 07-16-19, 08:34 AM
  #13  
indyfabz
Senior Member
 
indyfabz's Avatar
 
Join Date: Jan 2010
Posts: 39,059
Mentioned: 210 Post(s)
Tagged: 1 Thread(s)
Quoted: 18320 Post(s)
Liked 15,299 Times in 7,231 Posts
Originally Posted by Digger Goreman
Ignorance is bliss, and I'm a happy man!
Then why did you start this thread?
indyfabz is offline  
Old 07-16-19, 10:18 AM
  #14  
Retro Grouch 
Senior Member
 
Retro Grouch's Avatar
 
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225

Bikes: Catrike 559 I own some others but they don't get ridden very much.

Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 642 Times in 363 Posts
Originally Posted by Digger Goreman
Just replaced a triple ring 28/38/48 with a triple 22/32/42.... Haven't put my bike through the paces yet. What can I expect and why? Make the explanation as semi-technical as you like... I enjoy learning new things, especially on my bike!
Maybe no performance difference at all, particularly if you ride mostly flat roads.

If you had difficulty climbing up some of the hills in your area with your previous crankset, you are going to have less difficulty climbing up the hills with your new one.
If you found yourself running out of gears and freewheeling on the downhills previously, you are going to run out of gears and find yourself freewheeling even sooner with your new crankset.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
Retro Grouch is offline  
Old 07-16-19, 02:31 PM
  #15  
Caliper
Senior Member
 
Join Date: May 2014
Location: Michigan
Posts: 990

Bikes: Many

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 385 Post(s)
Liked 58 Times in 43 Posts
Originally Posted by Slightspeed
on flat roads you will go slower with similar effort.

False. Power is still power. Similar effort will land you at a similar speed, just at a smaller cog on the cassette, or spinning at a higher cadence.
Caliper is offline  
Old 07-16-19, 03:04 PM
  #16  
Leisesturm
Senior Member
 
Join Date: Jul 2005
Posts: 5,970
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 2475 Post(s)
Liked 722 Times in 513 Posts
Is the o.p.'s chain slightly too long now? Seems like it should need a link out. At least the chain should have been thought about. Ignorance is not always bliss.
Leisesturm is offline  
Old 07-16-19, 09:52 PM
  #17  
BirdsBikeBinocs
Senior Member
 
BirdsBikeBinocs's Avatar
 
Join Date: Aug 2018
Location: Mars Hotel
Posts: 472

Bikes: Giant Talon 29 - Specialized Diverge E5 Comp

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 283 Post(s)
Liked 45 Times in 33 Posts
Originally Posted by indyfabz
Then why did you start this thread?
To have a question answered. And he's happy to have got that answer. Pretty legit if you ask me. Why the noise.??
BirdsBikeBinocs is offline  
Old 07-17-19, 05:30 AM
  #18  
indyfabz
Senior Member
 
indyfabz's Avatar
 
Join Date: Jan 2010
Posts: 39,059
Mentioned: 210 Post(s)
Tagged: 1 Thread(s)
Quoted: 18320 Post(s)
Liked 15,299 Times in 7,231 Posts
Originally Posted by BirdsBikeBinocs
To have a question answered. And he's happy to have got that answer. Pretty legit if you ask me. Why the noise.??
Uh...See post #7 .
indyfabz is offline  
Old 07-18-19, 12:48 PM
  #19  
Digger Goreman
Quidam Bike Super Hero
Thread Starter
 
Digger Goreman's Avatar
 
Join Date: Jan 2019
Location: Stone Mountain, GA (Metro Atlanta, East)
Posts: 1,150

Bikes: 1995 Trek 800 Sport, aka, "CamelTrek"

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 331 Post(s)
Liked 415 Times in 282 Posts
Originally Posted by Retro Grouch
Maybe no performance difference at all, particularly if you ride mostly flat roads.

If you had difficulty climbing up some of the hills in your area with your previous crankset, you are going to have less difficulty climbing up the hills with your new one.
If you found yourself running out of gears and freewheeling on the downhills previously, you are going to run out of gears and find yourself freewheeling even sooner with your new crankset.
Bingo, this seems to be the very "thing": uphills are easier and, while not freewheeling on the downhills yet, top gear is more often used. Thanks Retro Grouch!
Digger Goreman is offline  
Old 07-18-19, 12:50 PM
  #20  
Digger Goreman
Quidam Bike Super Hero
Thread Starter
 
Digger Goreman's Avatar
 
Join Date: Jan 2019
Location: Stone Mountain, GA (Metro Atlanta, East)
Posts: 1,150

Bikes: 1995 Trek 800 Sport, aka, "CamelTrek"

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 331 Post(s)
Liked 415 Times in 282 Posts
Originally Posted by wipekitty
You'll have easier gearing for going up hills in the small chainring, but assuming the same rear cassette (gearing), you will have to spin very quickly to make the bike go the same speed in the big chainring.

I enjoy numbers, and there are a few gear calculators that can give you additional data using chainring and cassette sizes. First, this one (https://www.bikecalc.com) gives you a bunch of information, including the useful speed at cadence, or how fast the bike will go given the RPM of your pedaling. Green combinations are faster/harder to pedal; red combinations are slower/easier to pedal.

There's also the Sheldon Brown gear calculator (https://www.sheldonbrown.com/gear-calc.html) which provides the very interesting meters of development - how far your bike will travel forward with each rotation of the pedals. You can do some math and, for example, calculate how many times you'll need to turn the pedals per mile in each gear. This is probably useful only if you're on long solo rides and need something to focus on while passing the time.
Thanks, Wipekitty, I will check those out!
Digger Goreman is offline  
Old 07-18-19, 12:52 PM
  #21  
Digger Goreman
Quidam Bike Super Hero
Thread Starter
 
Digger Goreman's Avatar
 
Join Date: Jan 2019
Location: Stone Mountain, GA (Metro Atlanta, East)
Posts: 1,150

Bikes: 1995 Trek 800 Sport, aka, "CamelTrek"

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 331 Post(s)
Liked 415 Times in 282 Posts
Originally Posted by mstateglfr
Hopefully you dropped the front derailleur down a bit too since thats kinda pretty important.
I had the LBS do the work.
Digger Goreman is offline  
Old 07-18-19, 12:52 PM
  #22  
Digger Goreman
Quidam Bike Super Hero
Thread Starter
 
Digger Goreman's Avatar
 
Join Date: Jan 2019
Location: Stone Mountain, GA (Metro Atlanta, East)
Posts: 1,150

Bikes: 1995 Trek 800 Sport, aka, "CamelTrek"

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 331 Post(s)
Liked 415 Times in 282 Posts
Originally Posted by indyfabz
Then why did you start this thread?
Because learning, too, is bliss....
Digger Goreman is offline  
Old 07-18-19, 12:53 PM
  #23  
Digger Goreman
Quidam Bike Super Hero
Thread Starter
 
Digger Goreman's Avatar
 
Join Date: Jan 2019
Location: Stone Mountain, GA (Metro Atlanta, East)
Posts: 1,150

Bikes: 1995 Trek 800 Sport, aka, "CamelTrek"

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 331 Post(s)
Liked 415 Times in 282 Posts
Originally Posted by Leisesturm
Is the o.p.'s chain slightly too long now? Seems like it should need a link out. At least the chain should have been thought about. Ignorance is not always bliss.
Thanks, the LBS tech talked about that and I forgot to ask if he did. I can do that part if necessary
Digger Goreman is offline  
Old 07-18-19, 04:53 PM
  #24  
Road Fan
Senior Member
 
Road Fan's Avatar
 
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,853

Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8

Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1851 Post(s)
Liked 654 Times in 498 Posts
Originally Posted by CycleryNorth81
28/38/48= 0.015
22/32/42= 0.016

Difference of one thousanth.
How did you get this?
48/42 = 1.14
Road Fan is offline  
Old 07-19-19, 01:01 AM
  #25  
Retro Grouch 
Senior Member
 
Retro Grouch's Avatar
 
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225

Bikes: Catrike 559 I own some others but they don't get ridden very much.

Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 642 Times in 363 Posts
Originally Posted by Road Fan
How did you get this?
48/42 = 1.14
28 divided by 38 divided by 48.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
Retro Grouch is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.