Best cleaning method... disc brakes?
#1
Full Member
Thread Starter
Best cleaning method... disc brakes?
I have a Specialized diverge that needs a bath. It has hydraulic disc brakes. I know all the basics of bike washing; proper soaps, top to bottom, low pressures etc., but Im curious if anyone can help me with a great method to clean the bike without fouling the disc brake pads? Seems like gentle automotive soap will do just that. Thanks for any tips.
#3
Heft On Wheels
Join Date: Nov 2014
Location: South Dakota
Posts: 3,123
Bikes: Specialized,Cannondale,Argon 18
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 887 Post(s)
Liked 560 Times
in
346 Posts
Just remove the wheels and wash. If you don't want to remove the pads why not just hit them with some sandpaper after your done? If your worried about "crap" absorbing on the pads you should get a bike friendly wash. I never remove my pads on my CX bike and never have had an issue. I use the pink wash stuff and water. If I feel performance dropping a bit and pads are still plenty thick I will hit with the sandpaper and I am good to go again.
I know its apples to oranges but you don't do anything to your cars pads ever.....
I know its apples to oranges but you don't do anything to your cars pads ever.....
#4
Senior Member
Join Date: Nov 2015
Posts: 8,922
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 4717 Post(s)
Liked 1,882 Times
in
998 Posts
Just remove the wheels and wash. If you don't want to remove the pads why not just hit them with some sandpaper after your done? If your worried about "crap" absorbing on the pads you should get a bike friendly wash. I never remove my pads on my CX bike and never have had an issue. I use the pink wash stuff and water. If I feel performance dropping a bit and pads are still plenty thick I will hit with the sandpaper and I am good to go again.
I know its apples to oranges but you don't do anything to your cars pads ever.....
I know its apples to oranges but you don't do anything to your cars pads ever.....
#5
Senior Member
I think the best method is not actually washing the bike at all. Just spray it or towel with some cleaning stuff and wipe the bike clean.
#6
Senior Member
Join Date: Jul 2008
Location: Minas Ithil
Posts: 9,173
Mentioned: 66 Post(s)
Tagged: 0 Thread(s)
Quoted: 2432 Post(s)
Liked 638 Times
in
395 Posts
I don't know what the supposed proper way to do it is, but I always wash my bike normally with auto soap, then I wipe the rotors down with rubbing alcohol. Never had an issue yet.
#7
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,639
Bikes: Merlin Cyrene, Nashbar steel CX
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4737 Post(s)
Liked 1,533 Times
in
1,004 Posts
I don't own a disc-brake bike so I have absolutely no experience on this front, but the talk about contamination is interesting.. Isn't it normal in the course of road riding, especially in slightly wet conditions, for all manner of road spray that's contaminated with who knows what (oils, salt, etc..), to get everywhere (including disc pads)? It just strikes me odd that there's concern on what can and can't get on the pads.
#8
Senior Member
only oil and grease will ruin the brakes. I never clean my discs. they take care of that themselves.
#10
- Soli Deo Gloria -
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,779
Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix
Mentioned: 235 Post(s)
Tagged: 0 Thread(s)
Quoted: 6844 Post(s)
Liked 736 Times
in
469 Posts
My pads were contaminated by Zymol car wash soap. It contains too much wax and oil.
I tried everything to get rid of the squeal including complete replacement of rotors and pads, proper bedding, resetting pads, resin vs metal, cleaning solvents, sanding, baking pads in the oven and using auto brake pad anti-squeal products. Nothing worked. The squeal would always come back.
Eventually I figured it out, switched to plain water and a rag. The squealing has not returned.
-Tim-
I tried everything to get rid of the squeal including complete replacement of rotors and pads, proper bedding, resetting pads, resin vs metal, cleaning solvents, sanding, baking pads in the oven and using auto brake pad anti-squeal products. Nothing worked. The squeal would always come back.
Eventually I figured it out, switched to plain water and a rag. The squealing has not returned.
-Tim-
#11
Senior Member
Join Date: Jun 2003
Posts: 18,138
Bikes: 2 many
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1266 Post(s)
Liked 323 Times
in
169 Posts
My pads were contaminated by Zymol car wash soap. It contains too much wax and oil.
I tried everything to get rid of the squeal including complete replacement of rotors and pads, proper bedding, resetting pads, resin vs metal, cleaning solvents, sanding, baking pads in the oven and using auto brake pad anti-squeal products. Nothing worked. The squeal would always come back.
Eventually I figured it out, switched to plain water and a rag. The squealing has not returned.
-Tim-
I tried everything to get rid of the squeal including complete replacement of rotors and pads, proper bedding, resetting pads, resin vs metal, cleaning solvents, sanding, baking pads in the oven and using auto brake pad anti-squeal products. Nothing worked. The squeal would always come back.
Eventually I figured it out, switched to plain water and a rag. The squealing has not returned.
-Tim-
#12
Non omnino gravis
#13
FLIR Kitten to 0.05C
Join Date: Sep 2014
Location: Lincoln, Nebraska
Posts: 5,331
Bikes: Roadie: Seven Axiom Race Ti w/Chorus 11s. CX/Adventure: Carver Gravel Grinder w/ Di2
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 2349 Post(s)
Liked 406 Times
in
254 Posts
Garden hose with a bit of pressure. Ti is easy to clean that way.
#14
Chases Dogs for Sport
So long as you don't use a soap that has wax or some other coating product in it, you shouldn't have a problem washing a disk brake bike.
I use conventional car wash soap -- rain-X Spot Free is what I'm using now -- and I have never had a problem. I DON'T directly scrub or soap the disk braking surfaces, but I don't take the wheels off or take any other special measures to avoid them. As has been said above, the braking surfaces take care of cleaning themselves. I leave them alone.
I use conventional car wash soap -- rain-X Spot Free is what I'm using now -- and I have never had a problem. I DON'T directly scrub or soap the disk braking surfaces, but I don't take the wheels off or take any other special measures to avoid them. As has been said above, the braking surfaces take care of cleaning themselves. I leave them alone.
#15
cowboy, steel horse, etc
Join Date: Sep 2008
Location: The hot spot.
Posts: 44,851
Bikes: everywhere
Mentioned: 71 Post(s)
Tagged: 1 Thread(s)
Quoted: 12778 Post(s)
Liked 7,695 Times
in
4,084 Posts
I've washed the disc brakes with Dawn and water several times and braking still seems to be fine. I didn't actually apply the soapy water to the rotors, but some might have got onto them while washing other parts of the bike.
#18
Senior Member
Join Date: Jun 2013
Location: SW Fl.
Posts: 5,619
Bikes: Day6 Semi Recumbent "FIREBALL", 1981 Custom Touring Paramount, 1983 Road Paramount, 2013 Giant Propel Advanced SL3, 2018 Specialized Red Roubaix Expert mech., 2002 Magna 7sp hybrid, 1976 Bassett Racing 45sp Cruiser
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 1069 Post(s)
Liked 788 Times
in
505 Posts
Wash bike with foamy Dawn in water, air spray dry after clean water rinse and wax/polish frame if desired.
#20
Senior Member
Join Date: Oct 2004
Location: Huntington Beach, CA
Posts: 7,085
Bikes: Cervelo Prodigy
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 478 Post(s)
Likes: 0
Liked 87 Times
in
67 Posts
A mechanic told me that it depends if its hydraulic or mechanical disk brake system. With mechanical, the brake lever can be squeezed when the wheel is off the bike. But with hydraulic, it is a problem.
#21
Senior Member
Join Date: Mar 2010
Location: Seattle, WA
Posts: 23,208
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 18883 Post(s)
Liked 10,646 Times
in
6,054 Posts
Damp rag or paper towels, I just wipe the bike down.
#23
Senior Member
Join Date: May 2014
Posts: 707
Bikes: Specialized Diverge E5 Comp, Specialized AWOL Comp, Scott Solace 10
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 137 Post(s)
Liked 27 Times
in
20 Posts
This.
I used to go through more elaborate cleaning methods, but now I just do a thorough wipe down with a damp cloth that I rinse as necessary.
I will occasionally wipe the rotors down with rubbing alcohol, but other than that I don't bother using any soaps or detergents. And I'm able to get my bikes as clean as I used to.
I used to go through more elaborate cleaning methods, but now I just do a thorough wipe down with a damp cloth that I rinse as necessary.
I will occasionally wipe the rotors down with rubbing alcohol, but other than that I don't bother using any soaps or detergents. And I'm able to get my bikes as clean as I used to.
#24
Senior Member
Join Date: Jul 2008
Location: Minas Ithil
Posts: 9,173
Mentioned: 66 Post(s)
Tagged: 0 Thread(s)
Quoted: 2432 Post(s)
Liked 638 Times
in
395 Posts
I wipe down my rotors with rubbing alcohol and a new microfiber cloth all the time. I'm a clean freak anyway, and even if they look clean to the naked eye I always get a lot black crud coming off. I have heard of people putting alcohol on the pads then lighting them with a flame to burn the junk off them. If mine end up squealing I may try that.
#25
Senior Member
Join Date: Oct 2013
Location: Highlands Ranch, CO
Posts: 1,221
Bikes: '13 Diamondback Hybrid Commuter, '17 Spec Roubaix Di2, '17 Spec Camber 29'er, '19 CDale Topstone Gravel
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 590 Post(s)
Liked 445 Times
in
260 Posts
Wash with water only. Detergents will potentially wash away the beneficial greases and lubricants. And then, if necessary, wipe the rotors down with IPA (the alcohol, not the beer).