Go Back  Bike Forums > Bike Forums > Touring
Reload this Page >

crank length

Notices
Touring Have a dream to ride a bike across your state, across the country, or around the world? Self-contained or fully supported? Trade ideas, adventures, and more in our bicycle touring forum.

crank length

Old 01-25-17, 09:27 AM
  #1  
Squeezebox
Banned.
Thread Starter
 
Join Date: Nov 2015
Posts: 2,077
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 760 Post(s)
Likes: 0
Liked 1 Time in 1 Post
crank length

I'ld be interested in your opinion/experience with different crank lengths. Including how that relates to cadence, and power output (measured or not), comfort, etc.
Someone fairly casually mentioned the subject. I'ld like to hear more.
Squeezebox is offline  
Old 01-25-17, 09:42 AM
  #2  
Squeezebox
Banned.
Thread Starter
 
Join Date: Nov 2015
Posts: 2,077
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 760 Post(s)
Likes: 0
Liked 1 Time in 1 Post
My carbon road bicycle is 172.5 . My touring bicycle is 170. The around town 7 speed 170 also. And I did have a track bicycle with 165 cranks.
Each bicycle handles so much differently that I don't think that I can tell any great difference in crank length. Maybe with the track bicycle, but fixed gear is so much different. I also had a road bicycle to fixed conversion, no markings on the crank. was the difference fixed gear or crank length? I wish I had the extra $$ to try out 180 cranks on the touring bicycle. But alas. I'm 5'8" with 52 cm bicycles.
So what's your opinion and/or experience?
Squeezebox is offline  
Old 01-25-17, 09:43 AM
  #3  
mstateglfr 
Sunshine
 
mstateglfr's Avatar
 
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,538

Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo

Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10902 Post(s)
Liked 7,393 Times in 4,148 Posts
I have 170 and 175. I am 6'5. I couldnt care which I use. I am not a refined enough rider to care about 1cm of difference in my pedal stroke and since neither is too long for me, its not like my hips will hurt.


You have been riding for 3+ decades and have road bikes, town bikes, and a zombie killer. You have toured Europe and locally. I am sure you have enough experience to share too- what have your crank lengths been and how has it affected your riding?
mstateglfr is offline  
Old 01-25-17, 09:46 AM
  #4  
Wilfred Laurier
Señor Member
 
Wilfred Laurier's Avatar
 
Join Date: Feb 2013
Posts: 5,065
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 648 Post(s)
Liked 291 Times in 215 Posts
Over the past couple years I have used 170s, 175s, and 180s. There is a minor difference in how comfortable it is to spin at med/high rpm, but that might be partly because I have spent decades road riding on 170s without giving it much thought.
Wilfred Laurier is offline  
Old 01-25-17, 09:47 AM
  #5  
indyfabz
Senior Member
 
indyfabz's Avatar
 
Join Date: Jan 2010
Posts: 39,059
Mentioned: 210 Post(s)
Tagged: 1 Thread(s)
Quoted: 18320 Post(s)
Liked 15,299 Times in 7,231 Posts
Originally Posted by mstateglfr
you have been riding for 3+ decades and have road bikes, town bikes, and a zombie killer. You have toured europe and locally. I am sure you have enough experience to share too- what have your crank lengths been and how has it affected your riding?

+1.
indyfabz is offline  
Old 01-25-17, 09:50 AM
  #6  
indyfabz
Senior Member
 
indyfabz's Avatar
 
Join Date: Jan 2010
Posts: 39,059
Mentioned: 210 Post(s)
Tagged: 1 Thread(s)
Quoted: 18320 Post(s)
Liked 15,299 Times in 7,231 Posts
Originally Posted by Wilfred Laurier
but that might be partly because I have spent decades road riding on 170s without giving it much thought.
I don't even know the length of my inferior steel LHT crank arms, but I am guessing 175 since it's a 60cm frame.


Franky, I simply tour (and have evidence to back it up) without worrying much about stuff.
indyfabz is offline  
Old 01-25-17, 10:06 AM
  #7  
bradtx
Senior Member
 
Join Date: Jun 2010
Location: Pearland, Texas
Posts: 7,579

Bikes: Cannondale, Trek, Raleigh, Santana

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 308 Post(s)
Liked 3 Times in 3 Posts
@Squeezebox, I've used 170, 172.5, and 175 mm crank arms. I spec'd 172.5 mm for my builds and currently only have 170 mm and 175 mm crank arms.

Comparing 170 mm to 175 mm crank arms on two very similar bikes, I can spin up my cadence higher with the 170s and although there is a leverage advantage using a longer crank arm, it isn't something that I can feel. FWIW, both of my touring bikes have 170 mm crank arms.

Brad
bradtx is offline  
Old 01-25-17, 10:12 AM
  #8  
GamblerGORD53
Senior Member
 
Join Date: Apr 2010
Location: Elevation 666m Edmonton Canada
Posts: 2,457

Bikes: 2013 Custom SA5w / Rohloff Tourster

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1222 Post(s)
Liked 314 Times in 241 Posts
The facts are .... There is a 3% power diff for 5 mm length. Usually it is only noticed with an IGH like a SA hub with big gaps. I went from 165 to 180 and it changed everything to the better. Comparing these at the same speed, the shorter one will do 100 rpm while the 180 will do 91. BUT the relative circumference speed will be EXACTLY the same. Newton's second law. Knee extension is worse for higher, but offset some by less downforce.

I find the shorter one is gutless. I am 5'8". Tour bikes are mostly using 175s now, not bad.
GamblerGORD53 is offline  
Old 01-25-17, 11:27 AM
  #9  
fietsbob
Banned
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 43,598

Bikes: 8

Mentioned: 197 Post(s)
Tagged: 0 Thread(s)
Quoted: 7607 Post(s)
Liked 1,354 Times in 861 Posts
At a modest cadence, 170, 175, 180 are all fine. 180 lets the saddle come down
that 5 or 10 mm, Vs, the shorter...
while maintaining the same saddle top to pedal distance.

Standing on the pedals, climbing hills, there is the Leverage to consider..
Plus there is the frame BB height..

so the Low BB on my Brompton has 170 cranks.
Higher BB on The Koga, has the 180..

it also gave the illusion of more saddle setback,
then I bought a different seat post.



...

Last edited by fietsbob; 01-25-17 at 11:34 AM.
fietsbob is offline  
Old 01-25-17, 12:04 PM
  #10  
McBTC
Senior Member
 
McBTC's Avatar
 
Join Date: May 2015
Posts: 3,888

Bikes: 2015 22 Speed

Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1543 Post(s)
Liked 51 Times in 39 Posts
There are studies showing, for example, that 145s are more efficient than 175s but confirming such findings in your own situation is difficult. You can experiment with inexpensive crank shorteners but they change the Q-factor and even if you were to bite the bullet and purchase new cranks, you'd need to raise your saddle by more than an inch which will put you into an more aggressive riding position if your current setup prevents you from easily raising and possibly bringing back your bars. Going with shorter cranks makes it a lot easier to pick up your pace.
McBTC is offline  
Old 01-25-17, 12:30 PM
  #11  
robow
Senior Member
 
robow's Avatar
 
Join Date: Aug 2005
Posts: 3,861
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 595 Post(s)
Liked 278 Times in 189 Posts
Shimano presently offers their road cranks in 4 sizes ranging from 165 to 175mm. Think about the fact that this small 1 cm range is designed to serve humans that are 5 ft tall and those that are 6.5 ft tall. Obviously there is a lot of leeway here. Many years ago when I was buying stock bikes, a size 56 frame sometimes came with 170 cranks and other times with a 175, there was no 172.5 at the time. I became accustomed to 175's on my mountain bikes and so over the last 20 years when I build a frame up, I use 175 but I'm sure that I can't tell the difference in 2.5mm,.... 5 mm maybe?...wouldn't want to bet my life on it. A few years ago I changed out a bottom bracket for a friend who had over 20,000 miles on a bike after just a few years, and when I went to remove the cranks, I noticed he had two cranks arms of different lengths and yet he had never realized the difference. Ha
robow is offline  
Old 01-25-17, 12:34 PM
  #12  
McBTC
Senior Member
 
McBTC's Avatar
 
Join Date: May 2015
Posts: 3,888

Bikes: 2015 22 Speed

Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1543 Post(s)
Liked 51 Times in 39 Posts
* https://www.ncbi.nlm.nih.gov/pubmed/11417428
Attached Images
File Type: jpg
powervscranklength.jpg (19.9 KB, 197 views)
McBTC is offline  
Old 01-25-17, 12:45 PM
  #13  
indyfabz
Senior Member
 
indyfabz's Avatar
 
Join Date: Jan 2010
Posts: 39,059
Mentioned: 210 Post(s)
Tagged: 1 Thread(s)
Quoted: 18320 Post(s)
Liked 15,299 Times in 7,231 Posts
Originally Posted by GamblerGORD53
The alternative facts are ....
fify
indyfabz is offline  
Old 01-25-17, 01:18 PM
  #14  
phughes
Senior Member
 
phughes's Avatar
 
Join Date: Mar 2011
Posts: 3,064
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1020 Post(s)
Liked 1,252 Times in 724 Posts
I changed from 175 to 170 on my LHT over the Summer. I much prefer the 170s. I spin more easily. With the 175s I felt too much of an on/off sensation on each revolution. I was dealing with a nagging fit issue on this bike as well. I am sort of between frame sizes and opted for the 56 over the 54. The 54 comes with 170s so I decided to try them. I am more comfortable on the bike with the shorter cranks. It was a good change for me on this particular bike, for the way this bike is ridden. I sit and spin up hills and don't get out of the saddle. I also increased my speed a bit on flats as well. YMMV but for me, it was a good change.

Many moons ago, I raced BMX with 165s.
phughes is offline  
Old 01-25-17, 01:23 PM
  #15  
tarwheel 
Senior Member
 
tarwheel's Avatar
 
Join Date: May 2007
Location: Raleigh, NC
Posts: 8,900

Bikes: Waterford RST-22, Bob Jackson World Tour, Ritchey Breakaway Cross, Soma Saga, De Bernardi SL, Specialized Sequoia

Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 196 Post(s)
Likes: 0
Liked 6 Times in 4 Posts
Are you a spinner or a masher? I would presume that spinners would prefer a shorter crank and mashers a longer one. Your height, leg length and frame size are other relevant factors. In my case, all of my bikes have 172.5 cranks. When I buy a new crank, I search until I can find a 172.5. My knees are very susceptible to small changes in saddle height, so I would rather not mess with a good thing. I know that 172.5 fits me just right, so why change? However, 172.5 cranks are getting harder and harder to find as manufacturers limit their product lines.
tarwheel is offline  
Old 01-25-17, 03:11 PM
  #16  
bwgride
Slow Rider
 
bwgride's Avatar
 
Join Date: Aug 2004
Location: Georgia, USA
Posts: 1,043
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 38 Post(s)
Liked 1 Time in 1 Post
Sheldon Brown

https://www.sheldonbrown.com/cranks.html
bwgride is offline  
Old 01-25-17, 04:37 PM
  #17  
LeeG
Senior Member
 
Join Date: Sep 2008
Posts: 5,198
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 137 Post(s)
Likes: 0
Liked 81 Times in 64 Posts
I like my cranks to be the same length
LeeG is offline  
Old 02-19-17, 10:27 AM
  #18  
Brett A
Word.
 
Brett A's Avatar
 
Join Date: Jul 2008
Location: Rural New England
Posts: 232

Bikes: Surly Disc Trucker, Orbea Oiz XCountry Bike, Specialized Roubaix, Borealis Echo Fat Bike for Winter, many others out in the barn.

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 64 Post(s)
Liked 99 Times in 51 Posts
I went though this question as I was setting up my first-ever touring bike last summer in preparation of my first-ever tour; a 4 week/ 80k feet climbing solo, self-contained tour from Sebastopol,CA to the North rim of the Grand Canyon via Yosemite, Death Valley and Zion National Park.

The bike came with 170s. And over the summer, for may overnight camping rides from the house, I tried 172.5 and 175s. All with the same size granny (a 26)

Even though, after 30+ years of riding, I am used to 175s on my mountain bike, and 172.5s an my road bike, I wet with 170 for touring for two reasons that make sense intellectually and experientialy.

A shorter crank requires less articulation of the knee joint (it doesn't open/close as much on each cycle). And, since a touring bike is ideally geared in a way that does not require a lot of force on the pedals, 170's are just more comfortable and, in my estimation, safer on the joints. (Now that I'm 50, that is more of a concern)

I ended up with a 22/36 low gear combo with 26" wheels. This is about 15.5 gear inches which allowed me to climb the Sierra Nevadas, etc. on a fully loaded bike without going above a conversational effort, climbing at about 3 to 4 mph at around 80rpm. Point here is that at such easy effort, crank leverage is a non-consideration.

So I'd recommend 170s from my experience.

Last edited by Brett A; 02-19-17 at 10:31 AM.
Brett A is offline  
Old 02-19-17, 10:43 AM
  #19  
dabac
Senior Member
 
Join Date: Mar 2008
Posts: 8,688
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1074 Post(s)
Liked 295 Times in 222 Posts
I do find it easier to maintain a higher cadence with shorter cranks. That was important to me when my knees were giving me trouble.
Before and after, it didn't matter much.

I am a tad bit faster on longer cranks. But tend to be sorer after.
dabac is offline  
Old 02-19-17, 11:24 AM
  #20  
shelbyfv
Expired Member
 
shelbyfv's Avatar
 
Join Date: Jun 2007
Location: TN
Posts: 11,461
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3638 Post(s)
Liked 5,316 Times in 2,701 Posts
Originally Posted by mstateglfr
You have been riding for 3+ decades and have road bikes, town bikes, and a zombie killer. You have toured Europe and locally. I am sure you have enough experience to share too- what have your crank lengths been and how has it affected your riding?
Actually, it's over 40 years ......

Last edited by Homebrew01; 02-21-17 at 12:02 PM. Reason: Edited out Harassment/Trolling
shelbyfv is offline  
Old 02-19-17, 11:41 AM
  #21  
robow
Senior Member
 
robow's Avatar
 
Join Date: Aug 2005
Posts: 3,861
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 595 Post(s)
Liked 278 Times in 189 Posts
Originally Posted by dabac
I do find it easier to maintain a higher cadence with shorter cranks.
Do you think that such a small difference in crank length, less than 3% from a 175 to a 170mm affects your cadence more, even though you will still be turning the same number of gear inches, or going one gear lower, which can often decrease gear inches by 15% allows for a higher cadence? I'm going to bet on the latter.
robow is offline  
Old 02-19-17, 12:14 PM
  #22  
36Oly_Rider
Senior Member
 
36Oly_Rider's Avatar
 
Join Date: Aug 2012
Posts: 345

Bikes: Black Beauty; The Lone Ranger; Samsquantch

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 56 Post(s)
Likes: 0
Liked 2 Times in 2 Posts
Not sure where I saw it... may have been GCN or something... but wherever it was, it was said that on the flats, you really won't notice the difference between different sized cranks, but you'll benefit more from the shorter ones going uphill.
36Oly_Rider is offline  
Old 02-19-17, 02:07 PM
  #23  
dabac
Senior Member
 
Join Date: Mar 2008
Posts: 8,688
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1074 Post(s)
Liked 295 Times in 222 Posts
Originally Posted by robow
Do you think that such a small difference in crank length, less than 3% from a 175 to a 170mm affects your cadence more, even though you will still be turning the same number of gear inches, or going one gear lower, which can often decrease gear inches by 15% allows for a higher cadence? I'm going to bet on the latter.
The OP asked about opinion/experience, not data verified from double-blind testing.
And those are mine.
You are welcome to yours.

IMO humans can be surprisingly sensitive to changes in bike/rider interaction.
Sometimes the change in feel influences the rider's effort to create a greater difference than physics/mechanics only would suggest.

I have a long history of achy knees.
I kept trying to train myself out of mashing and into spinning.
But as soon as I didn't actively think about pedalling technique, I kept upping the gears and dropping the cadence.
That is, until I went to shorter cranks.
That kicked my average cadence up with 10, w/o me having to think about it.
And my knees stopped aching as often.

For me, there's just something about the feedback from longer cranks that makes me opt for a higher gear, a harder push and a lower cadence.

The pattern still stays true. I've got bikes with different crank lengths, and I always get a higher average cadence on the shorter-cranks bikes.

Last edited by dabac; 02-19-17 at 02:12 PM.
dabac is offline  
Old 02-19-17, 10:08 PM
  #24  
IK_biker
old fart
 
Join Date: Dec 2007
Location: PA-US
Posts: 379
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 119 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Originally Posted by GamblerGORD53
The facts are .... There is a 3% power diff for 5 mm length.
Wrong.
There are no such facts in evidence.
IK_biker is offline  
Old 02-19-17, 11:06 PM
  #25  
GamblerGORD53
Senior Member
 
Join Date: Apr 2010
Location: Elevation 666m Edmonton Canada
Posts: 2,457

Bikes: 2013 Custom SA5w / Rohloff Tourster

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1222 Post(s)
Liked 314 Times in 241 Posts
Maybe I used the wrong terminology BUT ... Pedals ARE levers >> Power or work = F x D.
Math is math. There is nothing wrong with my math as stated. 5/ 165 = 3%.
You can wizz around all the hell you like with 18 GI or whatever, I will prefer 75 avg rpm.
What is gained in force is lost in distance.

You noticed that Usain Bolt won 9 gold medals with LONG strides??
GamblerGORD53 is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.