left-side Ultegra power meter with right-side 105 crank
08-05-20, 08:54 AM
#1
Newbie
Thread Starter
Join Date: Jul 2020
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
left-side Ultegra power meter with right-side 105 crank
Hey guys, I'm thinking about buying a Ultegra R8000 Single Leg Power Meter Crank Arm from a friend but I have a full 105 setup. Would it cause issues to have crankarms that are different models? Both crankarms are the same length.
08-05-20, 09:00 AM
#2
Senior Member
Join Date: Jan 2009
Location: San Diego, CA
Posts: 3,670
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 836 Post(s)
Liked 1,061 Times
in
745 Posts
Should be OK. Measure the thickness of the cranks at the BB end as you may need to add spacers if the R8000 arm is not as wide.
08-05-20, 10:10 AM
#3
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,865
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2952 Post(s)
Liked 3,106 Times
in
1,417 Posts
All the Shimano crankarms are functionally the same. I put a Stages 105 crankarm on a Dura Ace 7800 crankset and it works perfectly. The only complaint is that the finish isn't as nice.
08-05-20, 01:21 PM
#4
LR÷P=HR
Join Date: Sep 2019
Location: SF Bay Area
Posts: 2,180
Bikes: 1981 Holdsworth Special, 1993 C-dale MT3000 & 1996 F700CAD3, 2018 Cervelo R3 & 2022 R5, JustGo Runt, Ridley Oval, Kickr Bike 8-)
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 867 Post(s)
Liked 1,204 Times
in
693 Posts
I ran an old Ultegra 6700 10speed on the drive side and a Stages Ultegra 8000 11speed on the NDS.
The hollowtech II are interchangeable.
Nobody even noticed the color difference.
Barry
EDIT: Watch out for the old Octalink cranks. Those are a different fit.
The hollowtech II are interchangeable.
Nobody even noticed the color difference.
Barry
EDIT: Watch out for the old Octalink cranks. Those are a different fit.
Likes For Barry2:
