Hard to remove front wheel
#1
Senior Member
Thread Starter
Hard to remove front wheel
Brake release is very hard to seperate the cable from the caliper
.....Gotta be operator error...
What's the trick ?
(Brake cable adjustment is all the way in.)
.....Gotta be operator error...
What's the trick ?
(Brake cable adjustment is all the way in.)
#2
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,094
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4209 Post(s)
Liked 3,875 Times
in
2,315 Posts
Further loosen the cable at the anchor bolt then wind out the adjuster for god lever travel when riding. Wind in the adjuster before releasing the noodle. Andy
__________________
AndrewRStewart
AndrewRStewart
#4
Senior Member
Thread Starter
Thanks.
that did it.
...sometimes the brain don’t go to the logical ...
Knew it was operator error .