Should your leg be slightly bent or completely straight?
#1
Senior Member
Thread Starter
Join Date: Dec 2016
Posts: 199
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 86 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Should your leg be slightly bent or completely straight?
When you are riding your bike and the pedal goes down as far as it can, should your leg still be slightly bent at the knee, or should it be straight?
From stuff I've heard, and just what I think, is that it should still be slightly bent, like almost straight but still bent. Because if it's straight then you could possibly hyperextend (pretty sure that's not the word I'm looking for, but I'm not sure) your knee.
I'm asking because a friend of mine from school was on his bike earlier while we were talking. I noticed his seat was so high his feet could barely even touch the ground, so I pointed it out and said he should probably lower it a little bit, because his legs were probably fully extending while riding his bike. He said they were but that there's nothing wrong with it. Later he sent me a video trying to prove me wrong, only to prove me right (according to the guy in the video) but he still disagrees.
I honestly don't care too much about my friend's seat or if he'll injure himself because 1. I warned him and he didn't want to listen. And 2. If he's been riding it like that, is comfortable, and hasn't hurt himself then he must be fine.
So, should your seat be low enough so that your legs are always bent at the knee while riding, or does it not really matter? Or... Does it depend on the person and how their body is built?
From stuff I've heard, and just what I think, is that it should still be slightly bent, like almost straight but still bent. Because if it's straight then you could possibly hyperextend (pretty sure that's not the word I'm looking for, but I'm not sure) your knee.
I'm asking because a friend of mine from school was on his bike earlier while we were talking. I noticed his seat was so high his feet could barely even touch the ground, so I pointed it out and said he should probably lower it a little bit, because his legs were probably fully extending while riding his bike. He said they were but that there's nothing wrong with it. Later he sent me a video trying to prove me wrong, only to prove me right (according to the guy in the video) but he still disagrees.
I honestly don't care too much about my friend's seat or if he'll injure himself because 1. I warned him and he didn't want to listen. And 2. If he's been riding it like that, is comfortable, and hasn't hurt himself then he must be fine.
So, should your seat be low enough so that your legs are always bent at the knee while riding, or does it not really matter? Or... Does it depend on the person and how their body is built?
#2
Senior Member
Join Date: Mar 2008
Posts: 8,688
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1074 Post(s)
Liked 295 Times
in
222 Posts
Reaching the ground or not is entirely uninteresting for saddle height for efficient seated pedalling.
The thing that makes leg straight or slightly bent tricky is that it doesn't take ankle angle into account.
And that can make a considerable difference.
A "safer" recommendation is "leg straight with heel-on-pedal".
This usually leaves you with a slight bend when the pedal axle is below tha ball of the foot and the ankle in its natural angle.
Don't forget the double-check of hips not rocking while pedalling, which would mean the saddle is too high.
The thing that makes leg straight or slightly bent tricky is that it doesn't take ankle angle into account.
And that can make a considerable difference.
A "safer" recommendation is "leg straight with heel-on-pedal".
This usually leaves you with a slight bend when the pedal axle is below tha ball of the foot and the ankle in its natural angle.
Don't forget the double-check of hips not rocking while pedalling, which would mean the saddle is too high.
Last edited by dabac; 02-01-17 at 01:45 AM.
#3
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,902
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4802 Post(s)
Liked 3,922 Times
in
2,551 Posts
The test I use is to sit on the bike leaning against a wall so I am almost upright, wearing only socks. I place my heels on the pedal spindles. There is a very definite seat height where I can either lock my knee or bend it keeping contact with the pedal and not rocking my hips.
I like a lowish seat. Some do this test wearing their cycling shoes. I don't claim this is perfect for all, but it is right for me and it allows me to set up any bike with any seat to the right seat height quickly.
For me, a straight knee is a seat way too high. But again, I like a seat lower than many. I started much higher, brought it down at the suggestion of the club vets when I started racing. As I rode years of long miles, I evolved to the test above.
Ben
I like a lowish seat. Some do this test wearing their cycling shoes. I don't claim this is perfect for all, but it is right for me and it allows me to set up any bike with any seat to the right seat height quickly.
For me, a straight knee is a seat way too high. But again, I like a seat lower than many. I started much higher, brought it down at the suggestion of the club vets when I started racing. As I rode years of long miles, I evolved to the test above.
Ben