How to bend spring in dual caliper break
#1
Member
Thread Starter
How to bend spring in dual caliper break
Hello everyone,
I'm in the final stages of my single speed maintenance and for the life of me can't bend/position the spring into place on the dual caliper break - it's really really strong and I can't bend it enough
Ant suggestions? Really appreciate any help.
I'm in the final stages of my single speed maintenance and for the life of me can't bend/position the spring into place on the dual caliper break - it's really really strong and I can't bend it enough
Ant suggestions? Really appreciate any help.
#2
LR÷P=HR
Join Date: Sep 2019
Location: SF Bay Area
Posts: 2,180
Bikes: 1981 Holdsworth Special, 1993 C-dale MT3000 & 1996 F700CAD3, 2018 Cervelo R3 & 2022 R5, JustGo Runt, Ridley Oval, Kickr Bike 8-)
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 867 Post(s)
Liked 1,205 Times
in
694 Posts
DO WEAR EYE PROTECTION!
Ideally slip a length of tubing over it to increase your leverage.
I can't tell, is there enough room to grab it with a adjustable wrench?
Barry
Ideally slip a length of tubing over it to increase your leverage.
I can't tell, is there enough room to grab it with a adjustable wrench?
Barry
#3
Veteran Racer
Join Date: Jul 2009
Location: Ciudad de Vacas, Tejas
Posts: 11,760
Bikes: 32 frames + 80 wheels
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1337 Post(s)
Liked 765 Times
in
432 Posts
Although you may get some good answers on this forum, a better place to post questions like this is the Bicycle Mechanics forum.
#4
Your cog is slipping.
Some people just love messing with stuff that doesn't need to be messed with.
Why you would ever feel the need to remove that spring in the first place when doing "maintenance" is beyond me.
Why you would ever feel the need to remove that spring in the first place when doing "maintenance" is beyond me.
Likes For Scrodzilla:
#5
Senior Member
It will be easier to disassemble the caliper,set the spring in it's proper place and tighten everything back down. Should be a 5 minute job.