Cable Grease
#1
Senior Member
Thread Starter
Join Date: Sep 2012
Location: Los Angeles
Posts: 752
Bikes: 2019 CAAD12, 2015 Specialized Sirrus Comp
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 559 Post(s)
Likes: 0
Liked 63 Times
in
45 Posts
Cable Grease
I'm looking for a recommendation to grease my rim brake and derailleur cables. My LBS is recommending Shimano Cable Grease, but it may be overkill (in terms of quantity) for my one bike. Are there good, lower-cost alternatives?
Thank you,
Robert
Thank you,
Robert
#2
Senior Member
Depends on what you're using. For example, all Jagwire housings above their bottom-end come with pre-lubricated liners and there's not necessarily any reason to add anything.
#5
Senior Member
For a 2019 bike you shouldn't need lube on a Shimano cable unless you leave the thing out in the rain 24/7 and I doubt you do with a CAAD12/Ultegra.
Likes For DrIsotope:
#7
Senior Member
I should mention too that when I started a thread about a month ago asking what lube to use for cables the answer I got was to not bother and just get new cables. In my case though the bike WAS left out in the rain and snow 24/7 for 4 years. As it turned out I only replaced the rear derailleur cable as that was the one giving me problems and it worked. The bike is also a 1990 model, not 2019.
No, you don't need to lube your cables. If one is sticky it probably has a broken wire and needs replacing.
No, you don't need to lube your cables. If one is sticky it probably has a broken wire and needs replacing.
#8
Full Member
Join Date: Mar 2018
Location: Los Angeles
Posts: 463
Bikes: 02 Litespeed Ultimate, 84 & 85 Raleigh Grand Prix, '84 Raleigh Prestige, 85 Raleigh 555 RSL, '20 Raleigh Tamland, 38 Raleigh, 85 Landshark "Raleigh", '84 Marinoni Levi's Raleigh, SB4484, SB7979, Raleigh SSCXWC, 87 Raleigh USA 531 Prototype
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 202 Post(s)
Liked 147 Times
in
79 Posts
So, we perform 20-30 Tune-ups a month. There are definitely situations in which even newer bikes have benefitted from cable lube. Slow return of brake levers, and slow drop of the Rear Mech are commonly improved. As far as what they use, it has varied by Mechanic. The guys I have had the highest faith in (20 + year experience) have preferred Tri-Flow wet. Whatever you do, never use a dry chain lube. We had one guy using this on occasion, and we had some comebacks. I can see how paraffins might sound like a great idea, but it gums up the works. On the other hand, if it's my bike, cable and housing are cheap and provide ultimate results.
#9
Rubber side down
Join Date: Mar 2011
Location: Teh Quickie Mart
Posts: 1,769
Bikes: are fun! :-)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Liked 225 Times
in
105 Posts
Dialectric (silicone) grease is what you want. It won't degrade the various synthetic components in the cable housing like petroleum-based grease will. I've also heard this works well but I'm guessing it is a silcone grease:
#10
Senior Member
Thread Starter
Join Date: Sep 2012
Location: Los Angeles
Posts: 752
Bikes: 2019 CAAD12, 2015 Specialized Sirrus Comp
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 559 Post(s)
Likes: 0
Liked 63 Times
in
45 Posts
Any thoughts on this product from Park Tool:
Just spoke to Calvin, and he recommended it over grease for its ability to work it's way into the cable housing.
Just spoke to Calvin, and he recommended it over grease for its ability to work it's way into the cable housing.
Last edited by Robert A; 11-21-19 at 02:52 PM.
#11
Senior Member
I've used the shimano SP-41 grease, which is also a silicone product. Haven't had any issues over the lifespan of my cables, shifting is always nice and crisp.
#12
Senior Member
#14
Passista
Join Date: Jul 2005
Posts: 7,584
Bikes: 1998 Pinarello Asolo, 1992 KHS Montaña pro, 1980 Raleigh DL-1, IGH Hybrid, IGH Utility
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 866 Post(s)
Liked 711 Times
in
392 Posts
Grease is too heavy and sticky IMO. I prefer some light oil, currently using ATF.
#16
Senior Member
If you have a bike with only a short gear loop at the end, it easy to clean and lube that.
Park the bike with the chain on the big rear cog. without pedalling shift all the way down, to release some cable and the cable goes slack. - Now you can unseat the housingends and clean the cable, ect.
#17
Rubber side down
Join Date: Mar 2011
Location: Teh Quickie Mart
Posts: 1,769
Bikes: are fun! :-)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Liked 225 Times
in
105 Posts
You do it as a cable prep during the installation--not after. Put some grease on your fingers and working it along the exposed cable working it into the filaments. Then, run the cable inside the housing moving it back and forth a few times. Take the cable out of the housing and gently wipe it down with a soft cloth. Then, install cable and housing.
Likes For Clipped_in: