Forgive me fellow C&Vers, but I have sinned
#1
Bike Butcher of Portland
Thread Starter
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,630
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4677 Post(s)
Liked 5,790 Times
in
2,279 Posts
Forgive me fellow C&Vers, but I have sinned
Early one morning a few weeks ago, @nlerner texts me that there's a Ritchey Breakaway CX in my frame size for sale, but it's listed on Craigslist in Santa Cruz, California. Neal knows I'm jealous of his S&S coupler modded Black Mountain Cycles bike. I'm very hopeful that we'll all be able to start travelling and touring on our bicycles in the not so distant future, so I negotiated with the seller to ship it to me (it comes in it's own special rollaround case!)
Here's the thing. It's got a threadless headset. Brifters. Outboard bearings. Not terribly C&V. Have mercy on me. It does have a steel frame and fork, however.
Shipping case next to my old travel bike
Breakaway broken down
First ride was a 30 miler. With daylight saving I had time to make it home before dark. There was some climbing, some gravel, and a good descent. Climbing showed me I needed the handebars up higher, gravel told me that it was a good gravel bike, and the descent through some fast turns showed that I needed to get used to a faster handling bike - most of my fleet is low trail. Oh, and the saddle is an a$$ hatchet.
Another 30 mile ride with @Andy_K this morning after replacing the stem and saddle. The ride was very much a success, except the chain kept skipping in middle gears. Turns out it has an 8 speed cassette with 9 speed indexed shifting.
Universal Cycles Portland store moved out from Portland to Beaverton, which is much closer to my house, so I stopped by and picked up an 11-32 9 speed cassette. The chain appears to be a narrow model, we'll see if it plays nicely with the new cassette.
It has room for very wide tires. Right now I'm running 700c x 35's, but there's clearly room for more. I think I can put fenders on with 35's and still have good clearance. There's a tour idea in the not so far future that I want to do that would require getting on a plane, and I like my big handlebar bags. so I'll torch up a rack that can be broken down flat to fit in the carrying case. I'm not sure if the fork is a keeper, it's a beefy unicrown low offset model, once I put the rack and a weighted handlebar bag I'm not sure it'll handle as well as I'd like, but that's to be seen. I'm also not crazy about the stopping power of the Cane Creek cantilevers, but those are easily replaced.
So, I've got a bike with brifters. Don't hate me.
Here's the thing. It's got a threadless headset. Brifters. Outboard bearings. Not terribly C&V. Have mercy on me. It does have a steel frame and fork, however.
Shipping case next to my old travel bike
Breakaway broken down
First ride was a 30 miler. With daylight saving I had time to make it home before dark. There was some climbing, some gravel, and a good descent. Climbing showed me I needed the handebars up higher, gravel told me that it was a good gravel bike, and the descent through some fast turns showed that I needed to get used to a faster handling bike - most of my fleet is low trail. Oh, and the saddle is an a$$ hatchet.
Another 30 mile ride with @Andy_K this morning after replacing the stem and saddle. The ride was very much a success, except the chain kept skipping in middle gears. Turns out it has an 8 speed cassette with 9 speed indexed shifting.
Universal Cycles Portland store moved out from Portland to Beaverton, which is much closer to my house, so I stopped by and picked up an 11-32 9 speed cassette. The chain appears to be a narrow model, we'll see if it plays nicely with the new cassette.
It has room for very wide tires. Right now I'm running 700c x 35's, but there's clearly room for more. I think I can put fenders on with 35's and still have good clearance. There's a tour idea in the not so far future that I want to do that would require getting on a plane, and I like my big handlebar bags. so I'll torch up a rack that can be broken down flat to fit in the carrying case. I'm not sure if the fork is a keeper, it's a beefy unicrown low offset model, once I put the rack and a weighted handlebar bag I'm not sure it'll handle as well as I'd like, but that's to be seen. I'm also not crazy about the stopping power of the Cane Creek cantilevers, but those are easily replaced.
So, I've got a bike with brifters. Don't hate me.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Likes For gugie:
#2
Newbie
I say why not! It's fun having a bit of the old, and the new. It'll be interesting to see as you switch back and forth between the 2 setups which shifting style you prefer. I've never tried brifters, but I can see how they're probably safer and definitely more convenient.
The Global Cycling Network guys have a cool video comparing the riding feel of a classic vs a modern. They keep saying the old style is cooler, but admit that the modern one feels stiffer and faster:
The Global Cycling Network guys have a cool video comparing the riding feel of a classic vs a modern. They keep saying the old style is cooler, but admit that the modern one feels stiffer and faster:
#3
Senior Member
Join Date: Dec 2014
Location: Central Virginia
Posts: 4,777
Bikes: Numerous
Mentioned: 150 Post(s)
Tagged: 0 Thread(s)
Quoted: 1676 Post(s)
Liked 3,084 Times
in
911 Posts
I don’t even know you any more. What’s next, electronic shifting?
__________________
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
#4
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,433
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5887 Post(s)
Liked 3,469 Times
in
2,079 Posts
They say you can't have too many bikes. I think you just proved why that rule is sometimes wrong,
I like modern bikes as well even though I've stopped riding mine ever since I decided to spend too much time hanging out on this site.
I like modern bikes as well even though I've stopped riding mine ever since I decided to spend too much time hanging out on this site.
#6
Senior Member
Join Date: Dec 2005
Posts: 17,143
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3803 Post(s)
Liked 6,632 Times
in
2,599 Posts
Hey, it's got a triple--old man gearing, ftw!
And if this is a show-us-your-travel-bike-with-brifters thread, here's mine:
And if this is a show-us-your-travel-bike-with-brifters thread, here's mine:
#8
Senior Member
Join Date: Dec 2005
Posts: 17,143
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3803 Post(s)
Liked 6,632 Times
in
2,599 Posts
nlerner , that's a calendar-worthy shot; really beautiful. Where was it taken?
Likes For nlerner:
#9
Bike Butcher of Portland
Thread Starter
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,630
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4677 Post(s)
Liked 5,790 Times
in
2,279 Posts
nlerner , that's a calendar-worthy shot; really beautiful. Where was it taken?
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#10
Not lost wanderer.
Join Date: Jan 2013
Location: Lititz, Pa
Posts: 3,321
Bikes: In USA; 73 Raleigh Super Course dingle speed, 72 Raleigh Gran Sport SS, 72 Geoffry Butler, 81 Centurion Pro-Tour, 74 Gugie Grandier Sportier
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 885 Post(s)
Liked 985 Times
in
518 Posts
Change that 11-32 to a 12-36 and put 48x45x30 on that triple and you have a super half step+.
Nice bike, I would take one like it.
Nice bike, I would take one like it.
#11
Senior Member
Join Date: Aug 2010
Location: Utah
Posts: 8,651
Bikes: Paletti,Pinarello Monviso,Duell Vienna,Giordana XL Super,Lemond Maillot Juane.& custom,PDG Paramount,Fuji Opus III,Davidson Impulse,Pashley Guv'nor,Evans,Fishlips,Y-Foil,Softride, Tetra Pro, CAAD8 Optimo,
Mentioned: 156 Post(s)
Tagged: 0 Thread(s)
Quoted: 2323 Post(s)
Liked 4,930 Times
in
1,763 Posts
__________________
Steel is real...and comfy.
Steel is real...and comfy.
#12
Newbie
gugie , good one on the train! That cracked me up.
Hey, you're a Portland guy--do they still have the Seattle to Portland bike ride? I used to work for a photographer back in the 80s and we used to shoot that one.
I saw a lot of beautiful centuries doing that job, but the STP was probably the top. What a gorgeous ride from start to finish.
Hey, you're a Portland guy--do they still have the Seattle to Portland bike ride? I used to work for a photographer back in the 80s and we used to shoot that one.
I saw a lot of beautiful centuries doing that job, but the STP was probably the top. What a gorgeous ride from start to finish.
#13
Senior Member
Join Date: Mar 2014
Location: City of Angels
Posts: 4,870
Bikes: A few too many
Mentioned: 42 Post(s)
Tagged: 1 Thread(s)
Quoted: 1363 Post(s)
Liked 2,177 Times
in
1,182 Posts
Early one morning a few weeks ago, @nlerner texts me that there's a Ritchey Breakaway CX in my frame size for sale, but it's listed on Craigslist in Santa Cruz, California. Neal knows I'm jealous of his S&S coupler modded Black Mountain Cycles bike. I'm very hopeful that we'll all be able to start travelling and touring on our bicycles in the not so distant future, so I negotiated with the seller to ship it to me (it comes in it's own special rollaround case!)
Here's the thing. It's got a threadless headset. Brifters. Outboard bearings. Not terribly C&V. Have mercy on me. It does have a steel frame and fork, however.
Shipping case next to my old travel bike
Breakaway broken down
First ride was a 30 miler. With daylight saving I had time to make it home before dark. There was some climbing, some gravel, and a good descent. Climbing showed me I needed the handebars up higher, gravel told me that it was a good gravel bike, and the descent through some fast turns showed that I needed to get used to a faster handling bike - most of my fleet is low trail. Oh, and the saddle is an a$$ hatchet.
Another 30 mile ride with @Andy_K this morning after replacing the stem and saddle. The ride was very much a success, except the chain kept skipping in middle gears. Turns out it has an 8 speed cassette with 9 speed indexed shifting.
Universal Cycles Portland store moved out from Portland to Beaverton, which is much closer to my house, so I stopped by and picked up an 11-32 9 speed cassette. The chain appears to be a narrow model, we'll see if it plays nicely with the new cassette.
It has room for very wide tires. Right now I'm running 700c x 35's, but there's clearly room for more. I think I can put fenders on with 35's and still have good clearance. There's a tour idea in the not so far future that I want to do that would require getting on a plane, and I like my big handlebar bags. so I'll torch up a rack that can be broken down flat to fit in the carrying case. I'm not sure if the fork is a keeper, it's a beefy unicrown low offset model, once I put the rack and a weighted handlebar bag I'm not sure it'll handle as well as I'd like, but that's to be seen. I'm also not crazy about the stopping power of the Cane Creek cantilevers, but those are easily replaced.
So, I've got a bike with brifters. Don't hate me.
Here's the thing. It's got a threadless headset. Brifters. Outboard bearings. Not terribly C&V. Have mercy on me. It does have a steel frame and fork, however.
Shipping case next to my old travel bike
Breakaway broken down
First ride was a 30 miler. With daylight saving I had time to make it home before dark. There was some climbing, some gravel, and a good descent. Climbing showed me I needed the handebars up higher, gravel told me that it was a good gravel bike, and the descent through some fast turns showed that I needed to get used to a faster handling bike - most of my fleet is low trail. Oh, and the saddle is an a$$ hatchet.
Another 30 mile ride with @Andy_K this morning after replacing the stem and saddle. The ride was very much a success, except the chain kept skipping in middle gears. Turns out it has an 8 speed cassette with 9 speed indexed shifting.
Universal Cycles Portland store moved out from Portland to Beaverton, which is much closer to my house, so I stopped by and picked up an 11-32 9 speed cassette. The chain appears to be a narrow model, we'll see if it plays nicely with the new cassette.
It has room for very wide tires. Right now I'm running 700c x 35's, but there's clearly room for more. I think I can put fenders on with 35's and still have good clearance. There's a tour idea in the not so far future that I want to do that would require getting on a plane, and I like my big handlebar bags. so I'll torch up a rack that can be broken down flat to fit in the carrying case. I'm not sure if the fork is a keeper, it's a beefy unicrown low offset model, once I put the rack and a weighted handlebar bag I'm not sure it'll handle as well as I'd like, but that's to be seen. I'm also not crazy about the stopping power of the Cane Creek cantilevers, but those are easily replaced.
So, I've got a bike with brifters. Don't hate me.
Best, Ben
__________________
"EVERY PERSON IS GUILTY OF ALL THE GOOD THEY DID NOT DO"
Voltaire
Voice recognition may sometimes create odd spelling and grammatical errors
"EVERY PERSON IS GUILTY OF ALL THE GOOD THEY DID NOT DO"
Voltaire
Voice recognition may sometimes create odd spelling and grammatical errors
#14
Crawlin' up, flyin' down
Join Date: Jan 2006
Location: Democratic Peoples' Republic of Berkeley
Posts: 5,639
Bikes: 1967 Paramount; 1982-ish Ron Cooper; 1978 Eisentraut "A"; two mid-1960s Cinelli Speciale Corsas; and others in various stages of non-rideability.
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 1019 Post(s)
Liked 2,504 Times
in
1,046 Posts
I, for one, see no sin here. Of course, I'm a godless heretic generally, so my blessing may not be worth much
I bought a Break-Away (road model) a few years back and put Campy 10sp triple on it. It is sitting in its case as I type this. I have only ridden it a very few times because I have not traveled nearly as much as I had envisioned.
I would say it rides well. Not "it rides well for a break-apart frame" or some other qualifier, just "it rides well," full stop. Getting used to the ride is like getting used to the ride of any new ride. I doubt if you will be disappointed.
From my limited experience, the Break-Away is a very fine option for a break-down travel bike. On word of caution - the dimensions of the bag are a hair bigger than the airline regs permit without an up-charge for oversize baggage. It's by a small amount and it does not look oversized. When I was checking into them the word was that people did not have any problems with airlines due to size, although the usual hijinks about trying to charge a premium because it's a bicycle was still a thing. I have no idea if that is still a problem, but a few years back it was a significant bone of contention. If an when you fly with it, be sure to check out your airline's regulations in advance and print them out to show baggage/check-in people who have their own ideas of what the rules are.
I bought a Break-Away (road model) a few years back and put Campy 10sp triple on it. It is sitting in its case as I type this. I have only ridden it a very few times because I have not traveled nearly as much as I had envisioned.
I would say it rides well. Not "it rides well for a break-apart frame" or some other qualifier, just "it rides well," full stop. Getting used to the ride is like getting used to the ride of any new ride. I doubt if you will be disappointed.
From my limited experience, the Break-Away is a very fine option for a break-down travel bike. On word of caution - the dimensions of the bag are a hair bigger than the airline regs permit without an up-charge for oversize baggage. It's by a small amount and it does not look oversized. When I was checking into them the word was that people did not have any problems with airlines due to size, although the usual hijinks about trying to charge a premium because it's a bicycle was still a thing. I have no idea if that is still a problem, but a few years back it was a significant bone of contention. If an when you fly with it, be sure to check out your airline's regulations in advance and print them out to show baggage/check-in people who have their own ideas of what the rules are.
__________________
"I'm in shape -- round is a shape." Andy Rooney
"I'm in shape -- round is a shape." Andy Rooney
#15
Bike Butcher of Portland
Thread Starter
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,630
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4677 Post(s)
Liked 5,790 Times
in
2,279 Posts
I, for one, see no sin here. Of course, I'm a godless heretic generally, so my blessing may not be worth much
I bought a Break-Away (road model) a few years back and put Campy 10sp triple on it. It is sitting in its case as I type this. I have only ridden it a very few times because I have not traveled nearly as much as I had envisioned.
I would say it rides well. Not "it rides well for a break-apart frame" or some other qualifier, just "it rides well," full stop. Getting used to the ride is like getting used to the ride of any new ride. I doubt if you will be disappointed.
From my limited experience, the Break-Away is a very fine option for a break-down travel bike. On word of caution - the dimensions of the bag are a hair bigger than the airline regs permit without an up-charge for oversize baggage. It's by a small amount and it does not look oversized. When I was checking into them the word was that people did not have any problems with airlines due to size, although the usual hijinks about trying to charge a premium because it's a bicycle was still a thing. I have no idea if that is still a problem, but a few years back it was a significant bone of contention. If an when you fly with it, be sure to check out your airline's regulations in advance and print them out to show baggage/check-in people who have their own ideas of what the rules are.
I bought a Break-Away (road model) a few years back and put Campy 10sp triple on it. It is sitting in its case as I type this. I have only ridden it a very few times because I have not traveled nearly as much as I had envisioned.
I would say it rides well. Not "it rides well for a break-apart frame" or some other qualifier, just "it rides well," full stop. Getting used to the ride is like getting used to the ride of any new ride. I doubt if you will be disappointed.
From my limited experience, the Break-Away is a very fine option for a break-down travel bike. On word of caution - the dimensions of the bag are a hair bigger than the airline regs permit without an up-charge for oversize baggage. It's by a small amount and it does not look oversized. When I was checking into them the word was that people did not have any problems with airlines due to size, although the usual hijinks about trying to charge a premium because it's a bicycle was still a thing. I have no idea if that is still a problem, but a few years back it was a significant bone of contention. If an when you fly with it, be sure to check out your airline's regulations in advance and print them out to show baggage/check-in people who have their own ideas of what the rules are.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#16
Senior Member
Join Date: Oct 2012
Location: Berkeley CA
Posts: 2,533
Bikes: 1981 Ron Cooper, 1974 Cinelli Speciale Corsa, 2000 Gary Fisher Sugar 1, 1986 Miyata 710, 1982 Raleigh "International"
Mentioned: 97 Post(s)
Tagged: 0 Thread(s)
Quoted: 929 Post(s)
Liked 1,289 Times
in
486 Posts
I think I tweaked my neck from averting my eyes so much. Gugie who?
#17
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,826 Times
in
1,994 Posts
...(.snipped a bunch) the descent through some fast turns showed that I needed to get used to a faster handling bike - most of my fleet is low trail....I'm not sure if the fork is a keeper, it's a beefy unicrown low offset model, once I put the rack and a weighted handlebar bag I'm not sure it'll handle as well as I'd like, but that's to be seen.
faster handling bike? I will buy different.
and I not too long ago removed some offset from a bike I bought as it just felt...” wrong “
too willing to dart to and fro, but explain a bit more. At lunch I have taken a number of my bikes out for a quick comparison, the one I removed offset from, even exchanged forks with different offset... so how about a more in depth commentary?
#18
Senior Member
Join Date: Sep 2017
Location: Eastern Shore, MD
Posts: 2,104
Bikes: Road ready: 1993 Koga Miyata City Liner Touring Hybrid, 1989 Centurion Sport DLX, "I Blame GP" Bridgestone CB-1. Projects: Yea, I got a problem....
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 753 Post(s)
Liked 735 Times
in
421 Posts
Convert an early 70's Raleigh to a 'Breakaway" and all will be forgiven...
#19
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,764
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2430 Post(s)
Liked 3,098 Times
in
1,953 Posts
I just don't understand how it can maintain it's stiffness and agility with couplers...you would think they would flex and stretch.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#21
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,724
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2152 Post(s)
Liked 3,401 Times
in
1,203 Posts
You shall be forever curs-ed.
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
#22
Senior Member
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,674
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1372 Post(s)
Likes: 0
Liked 1,747 Times
in
937 Posts
Though I prefer my vintage bikes I do not prefer them because they offer better ride quality or user friendliness. They are old, sporting dated technology and heavy by today's standards. However, I do like to find, restore and look at them. But when it is time for a serious rider, I too am a sinner. Not one of my older oldies compares to this newer oldie. I guess that that makes me a sinner or winner, depending on one's point of view...
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".
Likes For randyjawa:
#23
Bike Butcher of Portland
Thread Starter
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,630
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4677 Post(s)
Liked 5,790 Times
in
2,279 Posts
This thread has been hijacked by his evil twin.
@juvela will mostly likely give this person a name, he's good at that...
I've written much about the difference between low and high trail. Suffice it to say that when the front end of a low trail bike is loaded down, handling doesn't change much, whereas on higher trail bikes it does. I'll soon have a test bed for this theory.
There's plenty of broken early 70's Raleighs out there already...
One might think, but the long seatpost connects the seat lug halves together, the flange at the bottom uses the same principal of a KF flange (look it up, they're common in vacuum applications in semiconductor industry) My experience with them is that they make a very stiff connection, so I wasn't worried about it. That and Ritchey's sold a lot of these with no issues.
Thanks!
One more thing I forgot to mention...it's (cough, cough), TIG welded...
@juvela will mostly likely give this person a name, he's good at that...
I've written much about the difference between low and high trail. Suffice it to say that when the front end of a low trail bike is loaded down, handling doesn't change much, whereas on higher trail bikes it does. I'll soon have a test bed for this theory.
Thanks!
One more thing I forgot to mention...it's (cough, cough), TIG welded...
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#24
Full Member
Join Date: Sep 2011
Location: Durango, CO
Posts: 493
Bikes: too many old steel bikes
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 136 Post(s)
Liked 937 Times
in
176 Posts
I'm a sinner as well
Circa 2000 Voodoo Wazoo CX and now gravel bike. TIG welded, thread less HS, and 8 speed Campy Ergo.....
Likes For Andy Antipas:
#25
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,604
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10947 Post(s)
Liked 7,473 Times
in
4,181 Posts
When new, did that version Breakaway frame not come with a fork or is that a replacement fork?
Neat bike- serves a great purpose. When you travel down to the Bay Area, will you bring this or use your bike that stays down there?
Neat bike- serves a great purpose. When you travel down to the Bay Area, will you bring this or use your bike that stays down there?