Pictures of my Miyata 110 after detailing
#1
Senior Member
Thread Starter
Join Date: Jan 2010
Location: Granger, IN
Posts: 89
Bikes: 1984 Miyata 710, 2010 Scott CR! Team
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Pictures of my Miyata 110 after detailing
As mentioned in a previous post I bought a Myata 110 for my wife and a Miyata 710 for myself back in 84. My wife rode the 110 a couple of times and the bike has been hanging from the garage ceiling at 3 houses for the past 26 years.
The bike was the favorite pooping spot for flies and other insects for a quarter of a century. Over this time the aluminum had oxidized badly. My original goal was to just wash the bike, air up the tires , and lube the chain, I wanted something for my 24 year old son to ride when he came over to visit as the frame fits him well.
One thing led to another and here are the results. Everything on the bike is totally original except for the Eleganza bar tape I just put on. Thank you makers of Simple Green, Citrus degreaser, Dremel, Zaino, and Mothers Aluminum Polish.
The bike was the favorite pooping spot for flies and other insects for a quarter of a century. Over this time the aluminum had oxidized badly. My original goal was to just wash the bike, air up the tires , and lube the chain, I wanted something for my 24 year old son to ride when he came over to visit as the frame fits him well.
One thing led to another and here are the results. Everything on the bike is totally original except for the Eleganza bar tape I just put on. Thank you makers of Simple Green, Citrus degreaser, Dremel, Zaino, and Mothers Aluminum Polish.
Last edited by SVThis; 06-20-10 at 12:05 PM.
#4
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,868
Bikes: Too many to list here check my signature.
Mentioned: 194 Post(s)
Tagged: 2 Thread(s)
Quoted: 2938 Post(s)
Liked 2,934 Times
in
1,497 Posts
very nice looking. great job on the cleanup
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
#5
Senior Member
Join Date: Apr 2008
Location: Maidstone, Kent, England
Posts: 2,637
Bikes: 1970 Holdsworth Mistral, Vitus 979, Colnago Primavera, Corratec Hydracarbon, Massi MegaTeam, 1935 Claud Butler Super Velo, Carrera Virtuoso, Viner, 1953 Claud Butler Silver Jubilee, 1954 Holdsworth Typhoon, 1966 Claud Butler Olympic Road, 1982 Claud
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Liked 11 Times
in
10 Posts
Gtray job, how long did it take?
#6
Senior Member
Thread Starter
Join Date: Jan 2010
Location: Granger, IN
Posts: 89
Bikes: 1984 Miyata 710, 2010 Scott CR! Team
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I didn't keep track of the time , but I know I spent more time than I should of. About the only thing I removed was the chain. I was thinking of taking apart the whole bike before my better judgement kicked in. If it was an old top end bike I would have gotten more anal with the polishing of the alluminum. It does look real good in person.
Here's my 710
Here's my 710
#7
FBoD Member at Large
Join Date: Aug 2008
Location: Woodbury, MN
Posts: 6,094
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 30 Post(s)
Likes: 0
Liked 7 Times
in
7 Posts
From the guy who's name has become a verb synonymous with polishing...daaaAAAAYYYYAAAaaaaUM! That's one hell of a job on both bikes, WOW!
But something about pic 1 didn't seem right then I figgered it...typically for non-aero levers don't the cables go in front of the bars? And the rear brake cable on the opposite side of the headtube from the front cable? I think that's convention but I'll let someone else comment as all my classic bikes have had aero levers
I like your style:
"My original goal was to just wash the bike, air up the tires , and lube the chain, I wanted something for my 24 year old son to ride when he came over to visit as the frame fits him well. One thing led to another and here are the results."
Started off with modest goals, OCD kicked in and POOF, look whatcha have now . Welcome to the asylum...you're in good company.
Seriously...that's an impressive job.
But something about pic 1 didn't seem right then I figgered it...typically for non-aero levers don't the cables go in front of the bars? And the rear brake cable on the opposite side of the headtube from the front cable? I think that's convention but I'll let someone else comment as all my classic bikes have had aero levers
I like your style:
"My original goal was to just wash the bike, air up the tires , and lube the chain, I wanted something for my 24 year old son to ride when he came over to visit as the frame fits him well. One thing led to another and here are the results."
Started off with modest goals, OCD kicked in and POOF, look whatcha have now . Welcome to the asylum...you're in good company.
Seriously...that's an impressive job.
#8
Forum Moderator
Join Date: Jul 2007
Location: Kalamazoo MI
Posts: 20,652
Bikes: Fuji SL2.1 Carbon Di2 Cannondale Synapse Alloy 4 Trek Checkpoint ALR-5 Viscount Aerospace Pro Colnago Classic Rabobank Schwinn Waterford PMount Raleigh C50 Cromoly Hybrid Legnano Tipo Roma Pista
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 3093 Post(s)
Liked 6,609 Times
in
3,788 Posts
#9
sultan of schwinn
Join Date: Sep 2009
Location: Lehigh Valley, PA
Posts: 3,536
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 15 Times
in
9 Posts
But something about pic 1 didn't seem right then I figgered it...typically for non-aero levers don't the cables go in front of the bars? And the rear brake cable on the opposite side of the headtube from the front cable? I think that's convention but I'll let someone else comment as all my classic bikes have had aero levers
here are 2 of these combinations in the same catalog page:
#10
Senior Member
Join Date: Jul 2006
Location: Toronto (again) Ontario, Canada
Posts: 6,931
Bikes: Old Bike: 1975 Raleigh Delta, New Bike: 2004 Norco Bushpilot
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
From the guy who's name has become a verb synonymous with polishing...daaaAAAAYYYYAAAaaaaUM! That's one hell of a job on both bikes, WOW!
But something about pic 1 didn't seem right then I figgered it...typically for non-aero levers don't the cables go in front of the bars? And the rear brake cable on the opposite side of the headtube from the front cable? I think that's convention but I'll let someone else comment as all my classic bikes have had aero levers
I like your style:
"My original goal was to just wash the bike, air up the tires , and lube the chain, I wanted something for my 24 year old son to ride when he came over to visit as the frame fits him well. One thing led to another and here are the results."
Started off with modest goals, OCD kicked in and POOF, look whatcha have now . Welcome to the asylum...you're in good company.
Seriously...that's an impressive job.
But something about pic 1 didn't seem right then I figgered it...typically for non-aero levers don't the cables go in front of the bars? And the rear brake cable on the opposite side of the headtube from the front cable? I think that's convention but I'll let someone else comment as all my classic bikes have had aero levers
I like your style:
"My original goal was to just wash the bike, air up the tires , and lube the chain, I wanted something for my 24 year old son to ride when he came over to visit as the frame fits him well. One thing led to another and here are the results."
Started off with modest goals, OCD kicked in and POOF, look whatcha have now . Welcome to the asylum...you're in good company.
Seriously...that's an impressive job.
#12
Senior Member
Thread Starter
Join Date: Jan 2010
Location: Granger, IN
Posts: 89
Bikes: 1984 Miyata 710, 2010 Scott CR! Team
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
My son was surprised when he came over tonight to go for a ride. He couldn't believe it was the same bike. I told him he could take it home with him if he wanted it. He decided to keep it at my house so when he came over we could ride together. After I'm long gone I hope he remembers all the things we did together as father and son.
#13
In the right lane
#14
Dolce far niente
Join Date: Dec 2004
Location: Northern CA
Posts: 10,704
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 20 Post(s)
Likes: 0
Liked 17 Times
in
14 Posts
In the case of the OP's bike, it has been done correctly.
__________________
"Love is not the dying moan of a distant violin, it’s the triumphant twang of a bedspring."
S. J. Perelman
"Love is not the dying moan of a distant violin, it’s the triumphant twang of a bedspring."
S. J. Perelman