How About Clip or "Clipless SPD" Mountain Bike Peddles???
#1
Senior Member
Thread Starter
Join Date: Mar 2019
Posts: 81
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 58 Post(s)
Liked 0 Times
in
0 Posts
How About Clip or "Clipless SPD" Mountain Bike Pedals???
I was against this, but I did some research, and I see them bailing out of the pedals fast enough. I see the shoes for these are like normal shoes not like clods which is important. Hehe.
I'm going to do it, and get this system for the full rotation power gain. That'll be a lot of power fun.
What do you recommend? And this is not for the road bike scenario, although I'm not coming off of the streets. I do about 60-100 miles per week in a kind of BMX of the Mountain Bike on the streets thing.
So again I can't do the hardened, clod shoes, and I need to be out of the pedals ultra fast. You're experienced?
I'm going to do it, and get this system for the full rotation power gain. That'll be a lot of power fun.
What do you recommend? And this is not for the road bike scenario, although I'm not coming off of the streets. I do about 60-100 miles per week in a kind of BMX of the Mountain Bike on the streets thing.
So again I can't do the hardened, clod shoes, and I need to be out of the pedals ultra fast. You're experienced?
#2
Senior Member
Join Date: Sep 2008
Location: NE Tennessee
Posts: 917
Bikes: Giant TCR/Surly Karate Monkey/Foundry FireTower/Curtlo Tandem
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 169 Post(s)
Liked 84 Times
in
62 Posts
I use SPD-SL, the road syle "clod" shoes as you eloquently put it, and I have no problem unclipping when needed. It takes practice.
For mountain biking, I use Crank Brothers Egg Beaters. They allow you to clip in by sliding forward or reverse. Just my preference.
For mountain biking, I use Crank Brothers Egg Beaters. They allow you to clip in by sliding forward or reverse. Just my preference.
Likes For bakerjw:
#3
Senior Member
Join Date: Jul 2007
Location: South shore, L.I., NY
Posts: 6,882
Bikes: Flyxii FR322, Cannondale Topstone, Miyata City Liner, Specialized Chisel, Specialized Epic Evo
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 3238 Post(s)
Liked 2,085 Times
in
1,181 Posts
I was against this, but I did some research, and I see them bailing out of the pedals fast enough. I see the shoes for these are like normal shoes not like clods which is important. Hehe.
I'm going to do it, and get this system for the full rotation power gain. That'll be a lot of power fun.
What do you recommend? And this is not for the road bike scenario, although I'm not coming off of the streets. I do about 60-100 miles per week in a kind of BMX of the Mountain Bike on the streets thing.
So again I can't do the hardened, clod shoes, and I need to be out of the pedals ultra fast. You're experienced?
I'm going to do it, and get this system for the full rotation power gain. That'll be a lot of power fun.
What do you recommend? And this is not for the road bike scenario, although I'm not coming off of the streets. I do about 60-100 miles per week in a kind of BMX of the Mountain Bike on the streets thing.
So again I can't do the hardened, clod shoes, and I need to be out of the pedals ultra fast. You're experienced?
Likes For Steve B.:
#4
Troublemaker
Join Date: Jan 2005
Location: Earth
Posts: 460
Bikes: Yes. The more the better.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 46 Post(s)
Liked 44 Times
in
23 Posts
If you go with SPD pedals be sure to get the SH56 Multi release cleats. They a re easier to clip out with than the SH51 cleat.
#5
Banned
I have some old Shimano Mountain bike toe clip pedals .. they're OK..
The S in SPD is Shimano.. 'pedaling dynamics'
Now some pedals use magnets, made by other companies , but follow the 2 bolt cleat mount
that is part of the standards shimano created..
got Time Atac years ago to try the scheme out.. Time, France, another one adopting the 2 bolt cleat,
but offering more muddy feet compatibility ,, in pedal design..
[360 degree power output from both feet is a myth ]
....
The S in SPD is Shimano.. 'pedaling dynamics'
Now some pedals use magnets, made by other companies , but follow the 2 bolt cleat mount
that is part of the standards shimano created..
got Time Atac years ago to try the scheme out.. Time, France, another one adopting the 2 bolt cleat,
but offering more muddy feet compatibility ,, in pedal design..
[360 degree power output from both feet is a myth ]
....
Last edited by fietsbob; 06-17-19 at 10:05 AM.
#6
Senior Member
Yeah, how about them!
#7
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,865
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2952 Post(s)
Liked 3,106 Times
in
1,417 Posts
I always recommend these:
https://www.jensonusa.com/Shimano-PD-M520-SPD-Pedals
Inexpensive, bombproof. Although the multi-release cleats are often recommended for newbies, I am not a fan. I prefer to have one single defined motion.
https://www.jensonusa.com/Shimano-PD-M520-SPD-Pedals
Inexpensive, bombproof. Although the multi-release cleats are often recommended for newbies, I am not a fan. I prefer to have one single defined motion.
#8
Senior Member
Join Date: Aug 2017
Location: Northern Virginia
Posts: 727
Bikes: Current: 2016 Bianchi Volpe; 1973 Peugeot UO-8. Past: 1974 Fuji S-10-S with custom black Imron paint by Stinsman Racing of PA.
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 215 Post(s)
Liked 204 Times
in
142 Posts
This is good advice. The SH56 is silver in color, versus the black oxide of the standard SH51. I have my pedals set on full loose and use the SH56 and have never pulled out even climbing, yet they have always release easily. I also use a Q-tip to put a bit of oil on the clip edge.
#10
Senior Member
Join Date: Jul 2008
Location: Minneapolis, MN
Posts: 6,432
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 539 Post(s)
Liked 44 Times
in
38 Posts
Dmr Vault Pedals:
https://www.amazon.com/DMR-Vault-Ped...dp/B07G3GN9B7/
I use them because they're the most comfortable pedals I've used. Expensive though. Raceface Chesters are supposed to be good (and much cheaper) but I haven't used them personally.
For shoes Five Ten's use a special rubber compound that is much more grippy on metal pins than regular rubber, it's the shoes pro's downhill racing wear, here's their most stylish version:
https://www.adidasoutdoor.com/five-t...hoe/BTM00.html
https://www.amazon.com/DMR-Vault-Ped...dp/B07G3GN9B7/
I use them because they're the most comfortable pedals I've used. Expensive though. Raceface Chesters are supposed to be good (and much cheaper) but I haven't used them personally.
For shoes Five Ten's use a special rubber compound that is much more grippy on metal pins than regular rubber, it's the shoes pro's downhill racing wear, here's their most stylish version:
https://www.adidasoutdoor.com/five-t...hoe/BTM00.html
#11
rebmeM roineS
Join Date: Jan 2006
Location: Metro Indy, IN
Posts: 16,216
Bikes: Bacchetta Giro A20, RANS V-Rex, RANS Screamer
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 653 Post(s)
Liked 347 Times
in
226 Posts
Not exactly normal shoes but most SPD-style shoes have recessed cleats, making them walkable.
__________________
Bacchetta Giro A20, RANS V-Rex, RANS Screamer
Bacchetta Giro A20, RANS V-Rex, RANS Screamer
#12
- Soli Deo Gloria -
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,779
Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix
Mentioned: 235 Post(s)
Tagged: 0 Thread(s)
Quoted: 6844 Post(s)
Liked 736 Times
in
469 Posts
Road pedals release just as fast as SPD pedals.
There is no difference in terms of release. Twist your foot and you are out. That's all.
Color alone isn't an indication. The 51's come in silver as well.
-Tim-
There is no difference in terms of release. Twist your foot and you are out. That's all.
-Tim-
#13
Senior Member
Thread Starter
Join Date: Mar 2019
Posts: 81
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 58 Post(s)
Liked 0 Times
in
0 Posts
So how does this work as far as the pedal purchase and the shoe purchase?
Do I purchase separately, and I kind of assume that the cleat can be purchased separate of the shoe for the purpose of shoe style selection.
I like how the multi release sounds. More variability seem better.
Do I purchase separately, and I kind of assume that the cleat can be purchased separate of the shoe for the purpose of shoe style selection.
I like how the multi release sounds. More variability seem better.
#15
Just another bike nut
Join Date: Jun 2019
Posts: 10
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I use SPD for all my trail bikes, city bikes, bar cruisers, etc... easy to get in and out and you get the benefits of being clipped in, lots of options for “walkable shoes” out there, I’ve found some great ones on eBay
#16
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,865
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2952 Post(s)
Liked 3,106 Times
in
1,417 Posts
So how does this work as far as the pedal purchase and the shoe purchase?
Do I purchase separately, and I kind of assume that the cleat can be purchased separate of the shoe for the purpose of shoe style selection.
I like how the multi release sounds. More variability seem better.
Do I purchase separately, and I kind of assume that the cleat can be purchased separate of the shoe for the purpose of shoe style selection.
I like how the multi release sounds. More variability seem better.
It isn’t that difficult to learn to rotate out your heel. Some may disagree, but In my experience, it’s better to have one specific release motion that you’re not likely to do accidentally, especially in a sketchy situation.
Thread
Thread Starter
Forum
Replies
Last Post
surgtech1956
Long Distance Competition/Ultracycling, Randonneuring and Endurance Cycling
22
02-12-10 09:54 AM