gugie 

I have an unnatural aversion to bolt on derailleur claws. While touring down Hwy 1 in California when I was 18, I had a couple of flats. Getting the wheel back in with these things is difficult - they seemed to always want to rotate and stop the hub from going in. In addition, I couldn't seem to get the quick release on the rear wheel tight enough so that the wheel wouldn't shift and rub against the chainstays when I'd stand up and pedal hard. Now when I see a decent bike frame without a derailleur hanger I think "braze one on", or relegate to IGH.

Another thing that I avoid is black anodized parts. Working in an LBS in the 80's the cycle of black anodizing was in. Unless you were very careful assembling the bike a small scratch would scream out at you - the metal is silver colored under that black anodization. To this day I avoid black anodized parts.

With regards to bikes, what bugs you more than it bugs most people?

Chuck M 

I think most C&V readers now would be bothered now, but apparently when I was a kid it bothered me more than most people to turn drop bars upward. Everyone I saw with a "10 speed" or "racing bike" as they were called then turned their bars upward as soon as they got their new bike home.

merziac

I'm with ya on both of those, add kickstands to them and keep a Sharpie handy for the scratches.

rccardr 

‘Anatomica’ handle bars. Especially black ones. Ugly and never understood the reasoning behind them.

DiabloScott

Terminology: front fork, rear cassette.

bargo68

Mini/half fenders.
Just.....why?

Bianchi84

Fork drop out QR retention/liability schemes that make a nutted hub seem more preferable. I never had one but worked on many that did!

I don't want to start anything but... bars wrapped bottom to top.

BFisher 

The first thing that comes to mind is the marketing and how many people fall for it.

Take grease, for instance. There is already a sufficiently huge variety of grease to choose from that is readily available at lots of retail stores all over and will easily keep a bicycle operating as intended. But no. Bicycles somehow need "special" grease that comes in a "special" smaller container, and of course costs way more.

repechage

Kickstands that crush the chainstays.

bikingshearer 

Most jersey graphics in the last 20 or 30 years. Just because you can sublimate every color of the rainbow in any random pattern onto a single garment doesn't mean that you should.
Shorts that aren't black.
Shoes that aren't black.
Socks that aren't white.
Yes, I am old. Now get off my lawn.

Vintage_Cyclist

One of my eye rollers also. I'm particularly amused when I see vintage grease sold on eBay, such as the Campy 'Special' Grease tubs, which can easily go north of $100 for a partially used tub of 30-40 year old grease that someone found at a garage or estate sale.

https://www.ebay.com/sch/i.html?_fro...&LH_Complete=1

I've got one of these that a bought about 40 years ago for about five bucks. Still 2/3 full and mainly used for buttering seat posts and bolts. Something in a tube works better for bearing cups.

seypat

Currently contemplating a build with black anodized parts. Your reason is why they still haven't been bought. Plus, I like glossy black, but detest matte black. I just can't get myself to do it, yet.

seypat

The bearing grease that's sold in automotive sections is cheap and does the job...............but it's still sold in a tub/tube that's more than I'll use in a lifetime.

scarlson

Racks mounted with clamps instead of brazed on. I broke two low riders touring on racks like this. Had to mend them with spare spokes and rope from the tent, in the middle of a six month tour. We were in Wales when they cracked in half. In the dark. In the rain. On a 20% incline. I get the heebie jeebies just looking at clamp-on racks these days.

As far as black anodized components go, the main trouble I have is that I often find a black anodized component that I would like to match the silver stuff on the rest of my bike. And maybe it did come in silver, but all the used ones I can find for a decent price are black. So I remove the anodizing, but it's a huge pain, either playing with caustic chemicals or generating a dust cloud with my Scotch Brite and buffing wheels. And if you miss a spot, it will be blackly glaring back at you from a sea of perfectly polished alu. What a pain!

seypat

Now you've done it. I thought those other threads were controversial, but this, this is not acceptable. Have you no decency towards mankind?

thook

because the concave round of a traditional bar isn't quite native to the palm for extended periods. having said that, i don't care for anatomica's, either. not that i think they're ugly. on the "right" build, they kinda look cool to me. but, i don't like the feel of them. the ramps usually suck

oh, probably the only thing that bothers me is large gaps in tire frame clearance.....eg. 700x23c wheels on a 27" frame. just looks off to me

th0m

This might be controversial for some older guys, but bars higher than or level with the saddle just looks terrible on a road bike and bugs me to no end. Doesn't matter how nice the bike is, if the bars are not at least a few centimeters below the saddle, it's going to be ugly.

SurferRosa

Cable housings that are too long or, usually, way too long. I mean ...



I also often see the rear brake cable routed on the drive side of the stem from a right aero lever. I mean ...



And stamped drops.

nlerner

People who take perfectly fine 700c road bikes and stick those funny diminutive French wheels on them. I mean, what’s that all about?

thook

they do look funny, but i've noticed they do help keep road grime from the pivoting points on the calipers

J.Higgins 

Me too. I wont even consider buying a frame without forged dropouts unless I have specific plans to make it a single-speed or IGH.

Another thing that really bugs me is dirt, filth, grime and rust.

scarlson

Les Dilberteurs...

merziac

Not controversial for me, glad you can own your disdain, you have plenty of company and I get it but my comfort and ability to ride all day long trumps any problem you may have with it.

It bugs me when others try to dictate how I set my bikes up.

I'm going to assume you will quit riding when you can't ride them like that anymore.

iab

Long, detailed conversations about the "ideal" bike, component, setup, riding form, etc.

There is no such thing.

th0m

It's purely an aesthetical thing and I of course realise that not all people can or want to ride with a more aggressive setup. I just can't help thinking "oh, what a shame" everytime I see a potentially beautiful road bike set up that way.