Where can I get a Hayes HFX9 bleed fitting
05-02-08, 11:54 AM
#1
Newbie
Thread Starter
Join Date: Apr 2008
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Where can I get a Hayes HFX9 bleed fitting
I my front brake needed bleeding after I came off my bike I have managed to pressure bleed it with castrol response dot 4 and my gunson easibleed I usually use on my car, is it possible to get the bleed fitting that plugs into the master cylinder separately so next time fluid doesn't go everywhere
05-02-08, 02:49 PM
#2
is slower than you
Join Date: Jan 2005
Location: WI
Posts: 1,486
Bikes: Gunnar Sport, Marin Pine Mountain, Gunnar Ruffian, Gunnar Roadie, BMC Fourstroke, Salsa Vaya
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
You could try your local bike shop. Otherwise, JensonUSA.com and CambriaBike.com both carry a variety of disc brake parts.
__________________
Proud supporter of the Chippewa Off-Road Bike Association (CORBA)
www.chippewaoffroad.org
Proud supporter of the Chippewa Off-Road Bike Association (CORBA)
www.chippewaoffroad.org
05-02-08, 03:13 PM
#3
Newbie
Thread Starter
Join Date: Apr 2008
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The bike shops I've tried round here (Teesside, England) are useless, if it ain't Raleigh or Shimano they cant do it that's why I used my pressure bleeder, its improved it but there's still air in there think it will work better with a pipe on the outlet.
