Any real benefits of 11 speed over 10 speed?
#1
Member
Thread Starter
Any real benefits of 11 speed over 10 speed?
I think I'm missing the good ol' 10 speed days. I'm riding fewer miles now than ever before but it sure seems like I'm going through a lot of 11 speed chains. I know more is almost always better but other than slightly tighter ratios between each gear are there really any benefits to 11 speeds?
Likes For mdcoram:
#2
Globo Gym lifetime member
Join Date: Jan 2006
Location: Salem, Oregon
Posts: 5,204
Bikes: Fast ones
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 410 Post(s)
Liked 614 Times
in
306 Posts
Parts availability.
I had to replace the drivetrain on my 10-sp Ultegra/Dura-ace MadOne last year and it took days of scouring the internet to find parts. I still ended up with some mismatched stuff. That's when I decided it was new bike time.
I had to replace the drivetrain on my 10-sp Ultegra/Dura-ace MadOne last year and it took days of scouring the internet to find parts. I still ended up with some mismatched stuff. That's when I decided it was new bike time.
__________________
Likes For Cypress:
#3
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,032
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Mentioned: 560 Post(s)
Tagged: 2 Thread(s)
Quoted: 22579 Post(s)
Liked 8,919 Times
in
4,153 Posts
No. I run 10 speed on all my bikes. I suppose some fancy new wheel set may not be compatible but for the most part you are fine. Even 9 speed is ok although I suspect those folks have to look harder for cassettes and other parts.
#4
Senior Member
Join Date: Nov 2015
Posts: 8,922
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 4717 Post(s)
Liked 1,882 Times
in
998 Posts
11 speed shifters work better than 7900/6700/5700 10 speed shifters, but the old shifters(that don't use hidden shifter cables) work the best.
Last edited by noodle soup; 01-08-20 at 10:47 AM.
Likes For noodle soup:
#5
Senior Member
Join Date: Jul 2007
Location: South shore, L.I., NY
Posts: 6,863
Bikes: Flyxii FR322, Cannondale Topstone, Miyata City Liner, Specialized Chisel, Specialized Epic Evo
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 3225 Post(s)
Liked 2,056 Times
in
1,174 Posts
Practically no unless there's a gear you really need.
But as Cyrpress stated 11 spd. (and 9) parts are easier to come by, 10 can be a pain. If you intend to stay with 10 for a while, maybe source the cassette and chain, maybe the most used chainring as well, purchase now and store till you need it.
But as Cyrpress stated 11 spd. (and 9) parts are easier to come by, 10 can be a pain. If you intend to stay with 10 for a while, maybe source the cassette and chain, maybe the most used chainring as well, purchase now and store till you need it.
Last edited by Steve B.; 01-08-20 at 09:50 AM.
Likes For Steve B.:
#6
Member
Thread Starter
Likes For mdcoram:
#7
Globo Gym lifetime member
Join Date: Jan 2006
Location: Salem, Oregon
Posts: 5,204
Bikes: Fast ones
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 410 Post(s)
Liked 614 Times
in
306 Posts
This man speaks truth. My 11-sp Shimano 105 gravel bike shifts better (front and rear, but especially the front) than my Ultegra/Dura-ace 10-sp. Better ergos to boot.
__________________
Likes For Cypress:
#8
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,865
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2952 Post(s)
Liked 3,106 Times
in
1,417 Posts
I’ve built up a few 10-speed bikes in the last year: a TT bike and 2 CX bikes. Mostly because I had a bunch of parts lying around and partly because people are practically giving away 10-speed rim brake wheels these days. I guess I’ll start stockpiling cassettes and chains soon.
#9
Globo Gym lifetime member
Join Date: Jan 2006
Location: Salem, Oregon
Posts: 5,204
Bikes: Fast ones
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 410 Post(s)
Liked 614 Times
in
306 Posts
I’ve built up a few 10-speed bikes in the last year: a TT bike and 2 CX bikes. Mostly because I had a bunch of parts lying around and partly because people are practically giving away 10-speed rim brake wheels these days. I guess I’ll start stockpiling cassettes and chains soon.
__________________
Likes For Cypress:
#10
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,865
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2952 Post(s)
Liked 3,106 Times
in
1,417 Posts
Oh, good point.
#11
Senior Member
Join Date: Nov 2015
Posts: 8,922
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 4717 Post(s)
Liked 1,882 Times
in
998 Posts
For me, it was chainrings. The 53t chainring for a 6700 crankset is like a ghost, and the 39 wasn't much easier. Mine are currently mismatched in color because that's all I could find. Added bonus: stores know these are difficult to find, so just the 53t costs $105, and took 20 days to get to me.
#12
Senior Member
Join Date: Feb 2018
Posts: 786
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 338 Post(s)
Liked 408 Times
in
252 Posts
You can mix and match and use 11 speed chains and chainrings on a 10 speed groupset.
I use 11 speed chains on a 10 speed bike, no worries. Now, if cassettes start being an issue then you will need to upgrade, but that could only become an issue if you are looking for something like Dura ace 10 speed.
Of course if shifters die, that's it.
I use 11 speed chains on a 10 speed bike, no worries. Now, if cassettes start being an issue then you will need to upgrade, but that could only become an issue if you are looking for something like Dura ace 10 speed.
Of course if shifters die, that's it.
Likes For Cypress:
#14
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,865
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2952 Post(s)
Liked 3,106 Times
in
1,417 Posts
You can mix and match and use 11 speed chains and chainrings on a 10 speed groupset.
I use 11 speed chains on a 10 speed bike, no worries. Now, if cassettes start being an issue then you will need to upgrade, but that could only become an issue if you are looking for something like Dura ace 10 speed.
Of course if shifters die, that's it.
I use 11 speed chains on a 10 speed bike, no worries. Now, if cassettes start being an issue then you will need to upgrade, but that could only become an issue if you are looking for something like Dura ace 10 speed.
Of course if shifters die, that's it.
#15
Senior Member
Join Date: Nov 2015
Posts: 8,922
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 4717 Post(s)
Liked 1,882 Times
in
998 Posts
Yeah, that's the thing with my CX bike: they're first gen SRAM Red shifters (I made the leap!) and once those crap out I'll need to do something else. On my kid's CX bike, I used Tiagra shifters, and they work great other than the fact that they use 11-speed cable pull so they can't be used with older 10-speed rear derailleurs. On my TT bike, I just use DA bar ends set to friction, so those are simple.
#16
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,865
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2952 Post(s)
Liked 3,106 Times
in
1,417 Posts
Likes For noodle soup:
#18
Senior Member
Join Date: Jul 2013
Location: Missouri
Posts: 2,690
Bikes: Giant Propel, Cannondale SuperX, Univega Alpina Ultima
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 672 Post(s)
Liked 417 Times
in
249 Posts
I think I'm missing the good ol' 10 speed days. I'm riding fewer miles now than ever before but it sure seems like I'm going through a lot of 11 speed chains. I know more is almost always better but other than slightly tighter ratios between each gear are there really any benefits to 11 speeds?
On the other hand, if you're racing or otherwise performance oriented, then extra gears make it that much easier to settle your cadence/power/form into just the right notch for any given condition at any given moment.
My road bike is 11 spd, my CX bike is 10 spd. I never miss the extra gear when I'm riding a CX course, but on the road, I do find that on the CX bike I'm more likely to end up wishing I could bump my current gear up or down 1 tooth.
BB
__________________
Formerly fastest rider in the grupetto, currently slowest guy in the peloton
Formerly fastest rider in the grupetto, currently slowest guy in the peloton
#19
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,962
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4930 Post(s)
Liked 8,062 Times
in
3,811 Posts
It will also depend on whether or not you extend your range. Moving from a 10sp 11-25 to an 11sp 11-25 will give you more options in the middle. Going from a 10sp 11-25 to an 11sp 11-27 will give you the same 11-25 gearing, plus an additional lower option.
Likes For Eric F:
#20
Senior Member
For me, it was chainrings. The 53t chainring for a 6700 crankset is like a ghost, and the 39 wasn't much easier. Mine are currently mismatched in color because that's all I could find. Added bonus: stores know these are difficult to find, so just the 53t costs $105, and took 20 days to get to me.
#21
Senior Member
Join Date: Jul 2007
Location: South shore, L.I., NY
Posts: 6,863
Bikes: Flyxii FR322, Cannondale Topstone, Miyata City Liner, Specialized Chisel, Specialized Epic Evo
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 3225 Post(s)
Liked 2,056 Times
in
1,174 Posts
Only other thing I noticed is my 11spd 105 F shift is superior to any 9 or 10 system I used. Shimano changed the derailer design for the 5800 series, it works very well.
#24
I eat carbide.
Join Date: Jan 2006
Location: Elgin, IL
Posts: 21,627
Bikes: Lots. Van Dessel and Squid Dealer
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1325 Post(s)
Liked 1,306 Times
in
560 Posts
They used to be so easy....now I have to look it up each time.
__________________
PSIMET Wheels, PSIMET Racing, PSIMET Neutral Race Support, and 11 Jackson Coffee
Podcast - YouTube Channel
Video about PSIMET Wheels
Podcast - YouTube Channel
Video about PSIMET Wheels
#25
I eat carbide.
Join Date: Jan 2006
Location: Elgin, IL
Posts: 21,627
Bikes: Lots. Van Dessel and Squid Dealer
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1325 Post(s)
Liked 1,306 Times
in
560 Posts
Yeah... sorry about that. Industry pressure kind of thing. Only now we all lose. Industry and users. The inventory in the US has been horrendous for at least a generation now.
__________________
PSIMET Wheels, PSIMET Racing, PSIMET Neutral Race Support, and 11 Jackson Coffee
Podcast - YouTube Channel
Video about PSIMET Wheels
Podcast - YouTube Channel
Video about PSIMET Wheels
Likes For Psimet2001: