Weird Question: Whats the best way you've found to get tubes?
#1
Junior Member
Thread Starter
Join Date: Jul 2020
Posts: 11
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Weird Question: Whats the best way you've found to get tubes?
This comes from a pretty beginner cyclist and tinkerer with old bikes. LBS in my neighborhood charge $9 a tube, which I feel like is highway robbery although that might be a little unfair on my end as they have to make money to maintain a brick and mortar presence. So in addition to cost effectiveness (I have been getting flats like crazy, which is the fault of my own inexperience, but it will continue to happen), it's an ethical question.
How do you more experienced tube buyers purchase your wares?
How do you more experienced tube buyers purchase your wares?
#2
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,865
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2952 Post(s)
Liked 3,106 Times
in
1,417 Posts
I would stock up when my LBS held their annual sale. They would sell them at half price as a loss leader.
#3
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,394
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,694 Times
in
2,516 Posts
$9 a tube is cheap right now. The shop may actually be cutting margins because they don't want the price to be too high. The shop I work at sometimes is doing that. There are other tubes out there, some of them aren't very good.
#4
Newbie
If you are getting lots of punctures you either have a problem with the installation of your tyres and tubes, or you’ve got the wrong tyres for the roads you ride on.
With modern tyre technology (even ignoring tubeless systems) punctures should be a rarity, although in certain places this means using tyres that might not be as fast or nice-feeling as you’d want.
What tyres do you have, what pressures do you run, and where do you ride?
With modern tyre technology (even ignoring tubeless systems) punctures should be a rarity, although in certain places this means using tyres that might not be as fast or nice-feeling as you’d want.
What tyres do you have, what pressures do you run, and where do you ride?
Likes For ElCani:
#5
Senior Member
Walmart charges 5 bucks a tube and they're pretty much indistinguishable from tubes you would buy from a bike shop. If they stock your size, that's the way to go imo.
#6
It's MY mountain
Join Date: Sep 2006
Location: Mt.Diablo
Posts: 10,002
Bikes: Klein, Merckx, Trek
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 4337 Post(s)
Liked 2,980 Times
in
1,617 Posts
I buy them at the LBS and don't think about the cost too much. While I'm there I browse around for other stuff I might need, and talk to the staff just to be friendly and maybe they'll remember me next time I come in needing a quick chain replacement or something.
#7
Senior Member
Join Date: Jun 2006
Location: NW Burbs, Chicago
Posts: 12,053
Mentioned: 201 Post(s)
Tagged: 0 Thread(s)
Quoted: 3015 Post(s)
Liked 3,793 Times
in
1,407 Posts
$9 is highway robbery?
I'll get far more satisfaction from spending $9 at the LBS than I will get from spending $9 at the McDonalds, gas station, Comcast, electric company, Home Depot, Walgreens, Verizon, State Farm, TurboTax and just about every other bill that comes across my desk. Life is too short to quibble over a few lousy dollars.
I'll get far more satisfaction from spending $9 at the LBS than I will get from spending $9 at the McDonalds, gas station, Comcast, electric company, Home Depot, Walgreens, Verizon, State Farm, TurboTax and just about every other bill that comes across my desk. Life is too short to quibble over a few lousy dollars.
#8
Senior Member
Join Date: Oct 2013
Location: Highlands Ranch, CO
Posts: 1,221
Bikes: '13 Diamondback Hybrid Commuter, '17 Spec Roubaix Di2, '17 Spec Camber 29'er, '19 CDale Topstone Gravel
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 590 Post(s)
Liked 445 Times
in
260 Posts
I just bought these for $4.50 each (when you get the 6-pack) Amazon link
#9
Senior Member
Join Date: Aug 2015
Location: Kingdom of Hawai'i
Posts: 1,200
Bikes: Peugeot, Legnano, Fuji, Zunow, De Rosa, Miyata, Bianchi, Pinarello, Specialized, Bridgestone, Cinelli, Merckx
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 429 Post(s)
Liked 475 Times
in
218 Posts
Sounds to me like the inevitability of flats for the OP can actually be avoided by some skills training (mounting/inflation process) and equipment changes (rim tape, proper size tube, etc).
We all have a problematic wheel from time to time, which incurs flats we can't explain and certainly kill the buzz with time spent on the side of the road. But a careful work can usually find the culprit. Sometimes it's the tire that needs to be tossed or relegated to the beater bike.
Stock up when they're cheap, but most people won't need more than a couple tubes and a patch kit for hundreds if not thousands of miles. Right?
We all have a problematic wheel from time to time, which incurs flats we can't explain and certainly kill the buzz with time spent on the side of the road. But a careful work can usually find the culprit. Sometimes it's the tire that needs to be tossed or relegated to the beater bike.
Stock up when they're cheap, but most people won't need more than a couple tubes and a patch kit for hundreds if not thousands of miles. Right?
Likes For billytwosheds:
#10
Senior Member
Join Date: Aug 2013
Posts: 2,321
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 767 Post(s)
Liked 1,898 Times
in
889 Posts
I have to agree that $9 is not a big deal for a tube. I usually get them online, but also grab a couple if I happen to swing by a bike shop where they may even be more than that.
#11
Klaatu..Verata..Necktie?
Join Date: May 2007
Location: SF Bay Area
Posts: 17,952
Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 10421 Post(s)
Liked 11,882 Times
in
6,088 Posts
Wait for sales online, and stock up. Also, invest in patches.
__________________
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
Likes For genejockey:
#12
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,842
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2337 Post(s)
Liked 2,821 Times
in
1,540 Posts
these threads get met. people think $5 coffee is normal but a bike tire that is $9 is hi way robbery?
Anyway I have tried a lot of tubes, types, over the years.
As always you get what you pay for so a large degree
I have settled on Continental race lite butyl tubes. for me they are a good match in terms of weight, performance/feel, reasonable puncture resistance and having a removable core so I can use sealant.
Retail tends to be $10t to $11 but you can find them for in the $5 to $6 dollar range on sale, in uk bike on line bike shops or amazon bundled a a 4 pack buy
other wise as note above walmart, amazon
also Velox rim tape is only way to go IMHO and only Rema TipTop patches
Anyway I have tried a lot of tubes, types, over the years.
As always you get what you pay for so a large degree
I have settled on Continental race lite butyl tubes. for me they are a good match in terms of weight, performance/feel, reasonable puncture resistance and having a removable core so I can use sealant.
Retail tends to be $10t to $11 but you can find them for in the $5 to $6 dollar range on sale, in uk bike on line bike shops or amazon bundled a a 4 pack buy
other wise as note above walmart, amazon
also Velox rim tape is only way to go IMHO and only Rema TipTop patches
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Likes For squirtdad:
#13
Senior Member
Join Date: Dec 2016
Location: Long Island, NY
Posts: 2,109
Bikes: Trek 800 x 2, Schwinn Heavy Duti, Schwinn Traveler, Schwinn Le Tour Luxe, Schwinn Continental, Cannondale M400 and Lambert, Schwinn Super Sport
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 809 Post(s)
Liked 1,022 Times
in
665 Posts
Bike shops will throw away a perfectly good tube that has one little hole in it. Wait until the bike shop closes. Then go into their dumpster sort though their tubes to find you size. One thing to look out for is that the staff at bike shops like to eat at the shop, so their meals will end up in the garbage as well. You might score some good food while your at it.
When you get home patch the tube and your good to go.
Or you could patch your own tubes without digging through the trash. They can be patched multiple times. There is no limit as long as when you patch the tube, you did it correctly and it still holds air.
By the way, since you are getting so many flats, and you shouldn't, when you take the tire off the rim, do some investigating. Find the hole in the tube. Is it a single puncture hole? Is the thing that punctured the tube still stuck in the tire? Bike mechanics will check the inside of the tire with their fingers to see if there is anything sharp still stuck in the tire before mounting a new tube. Being a bike mechanic comes with risks. That is one of them.
Do you have a "snake bite", two holes on the side of the tube? This indicates that there may not be enough air in the tire or that you hit a pot hole or bump. The tube is being pinched between the road and the rim. Are the tubes possibly leaking from the valve? Sometimes the valve doesn't seal well or the valve core may be loose. Are you using latex tubes? Probably not. These are specially tubes intended for the serious go fast cyclist. Latex tubes loose air and need to be pumped up each day.
When you get home patch the tube and your good to go.
Or you could patch your own tubes without digging through the trash. They can be patched multiple times. There is no limit as long as when you patch the tube, you did it correctly and it still holds air.
By the way, since you are getting so many flats, and you shouldn't, when you take the tire off the rim, do some investigating. Find the hole in the tube. Is it a single puncture hole? Is the thing that punctured the tube still stuck in the tire? Bike mechanics will check the inside of the tire with their fingers to see if there is anything sharp still stuck in the tire before mounting a new tube. Being a bike mechanic comes with risks. That is one of them.
Do you have a "snake bite", two holes on the side of the tube? This indicates that there may not be enough air in the tire or that you hit a pot hole or bump. The tube is being pinched between the road and the rim. Are the tubes possibly leaking from the valve? Sometimes the valve doesn't seal well or the valve core may be loose. Are you using latex tubes? Probably not. These are specially tubes intended for the serious go fast cyclist. Latex tubes loose air and need to be pumped up each day.
Likes For Velo Mule:
#14
Senior Member
Join Date: Dec 2014
Location: Central Virginia
Posts: 4,778
Bikes: Numerous
Mentioned: 150 Post(s)
Tagged: 0 Thread(s)
Quoted: 1676 Post(s)
Liked 3,089 Times
in
911 Posts
I recently read a thread elsewhere about how tubes and other parts are so expensive now. I also balk at paying that much for a tube but OTOH, my last batch of cheap tubes from one of the British websites (or maybe Amazon, can't remember ) failed at the valve stem pretty quickly. Lesson learned, I pay for quality and patch frequently.
__________________
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
#15
Senior Member
Likes For HTupolev:
#16
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1607 Post(s)
Liked 2,216 Times
in
1,103 Posts
Most of my flats in the last two - three years have been near the valve stem near or at the junction between the valve reinforcement and the tube. Some times at the mold line. Since i don't have rim tape of any kind the rim is smooth and the spoke holes are covered, its the quality of the tube. The last one, last week, is a Continental tube. The bike was hanging after a ride. I was standing next to it looking at my ride stats when it blew. Ragged, ripped hole.
My experience is that there is a seriously bad quality control activity regardless of the name on the box.
My tubulars are more reliable!
My experience is that there is a seriously bad quality control activity regardless of the name on the box.
My tubulars are more reliable!
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
#17
Occam's Rotor
Join Date: Jul 2013
Posts: 7,248
Mentioned: 61 Post(s)
Tagged: 0 Thread(s)
Quoted: 2366 Post(s)
Liked 2,331 Times
in
1,164 Posts
These guys are a great source: https://www.nosvacuumtubes.net
If you can get an Amperex 6922, PQ, white label, US, pinched waist (shield, gold pins), at any price, go for it.
If you can get an Amperex 6922, PQ, white label, US, pinched waist (shield, gold pins), at any price, go for it.
Likes For Cyclist0108:
#18
Senior Member
When do your flats tend to happen? Direct contact between rim and tube is generally non-ideal because of braking heat.
#19
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,646
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2608 Post(s)
Liked 1,699 Times
in
935 Posts
$9 robbery for tubes? Some people have differing ideas of what robbery is.
So I was going to ask if you knew where to score some Gold Lion KT88s... and then I see someone's making them (or making coke bottle KT88s and putting the Genalex Gold Lion name on them)
It's been a long time since my ol' buddy's had some primo tubes loaded up...
https://images.lilypix.com/albums/use...gybackback.jpg
These guys are a great source: https://www.nosvacuumtubes.net
If you can get an Amperex 6922, PQ, white label, US, pinched waist (shield, gold pins), at any price, go for it.
If you can get an Amperex 6922, PQ, white label, US, pinched waist (shield, gold pins), at any price, go for it.
It's been a long time since my ol' buddy's had some primo tubes loaded up...
https://images.lilypix.com/albums/use...gybackback.jpg
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Likes For The Golden Boy:
#20
2k miles from the midwest
Join Date: Feb 2005
Location: Washington
Posts: 1,964
Bikes: ~'75 Colin Laing, '80s Schwinn SuperSport 650b, ex-Backroads ti project...
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 525 Post(s)
Liked 931 Times
in
446 Posts
I have learned to patch more than I used to.
I HATE paying lbs prices for consumables. Cables are another thing that just boggles my mind when shops charge $4, $5, $7 for a single cable.
I HATE paying lbs prices for consumables. Cables are another thing that just boggles my mind when shops charge $4, $5, $7 for a single cable.
#22
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,624
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3883 Post(s)
Liked 6,476 Times
in
3,205 Posts
I search eBay's cycling category for "tube presta 32" (without the quotes).
The "32" is the stem height that my bikes require. They all hate really long stems. It's not me, it's the bikes.
The "32" is the stem height that my bikes require. They all hate really long stems. It's not me, it's the bikes.
Likes For SurferRosa:
#23
Senior Member
Join Date: Oct 2012
Location: Berkeley CA
Posts: 2,536
Bikes: 1981 Ron Cooper, 1974 Cinelli Speciale Corsa, 2000 Gary Fisher Sugar 1, 1986 Miyata 710, 1982 Raleigh "International"
Mentioned: 97 Post(s)
Tagged: 0 Thread(s)
Quoted: 930 Post(s)
Liked 1,291 Times
in
487 Posts
As noted by a couple of folks above, what type of flats are you getting? pinch flats? goatshead thorns? spoke punctures due to bad rim tape? road debris? pinched during tire mounting? You need to diagnose the problem and then figure out the solution. We can help you with that.
Also, I gotta ask, how many times do you patch a tube before buying a replacement? Unless you're slashing big holes in your tires/tubes, you should be able to patch at least 10 punctures per tube and patches/cement cost next to nothing. Properly patched tubes (no instant patches!) are just as strong as unpatched tubes. I have several tubes with 5 to 10 patches on them and seldom buy new tubes. The spare tubes I carry in my saddle bag usually have a few patches on them. If you're one of those wasteful people who throw away tubes with a single puncture then you need to take some lessons in proper use of a patch kit.
Also, I gotta ask, how many times do you patch a tube before buying a replacement? Unless you're slashing big holes in your tires/tubes, you should be able to patch at least 10 punctures per tube and patches/cement cost next to nothing. Properly patched tubes (no instant patches!) are just as strong as unpatched tubes. I have several tubes with 5 to 10 patches on them and seldom buy new tubes. The spare tubes I carry in my saddle bag usually have a few patches on them. If you're one of those wasteful people who throw away tubes with a single puncture then you need to take some lessons in proper use of a patch kit.
Likes For davester:
#24
Senior Member
There seems to be a lot of variability in both cold-vulcanized and glueless patches. Some glueless patches suck, but I've never had any trouble with Park GP-2. Rema seems to be the safe-bet option for cold-vulcanizing patches.
#25
Senior Member
Join Date: Jan 2016
Posts: 3,448
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 874 Post(s)
Liked 2,287 Times
in
1,278 Posts
Like SurferRosa says a 32 stem height is the most important to me. I go to my LBS to buy anything I can , but , alas , they don’t sell the short stem tubes. I am forced to buy on the bay.
Likes For Kabuki12: