Broken nipple
#1
Sr Member on Sr bikes
Thread Starter
Broken nipple
In all my years of riding (nearly 40) I don't think I've ever had a brass nipple break. Many spokes...almost always at the head...but never a nipple.
Dan
Dan
#2
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,084
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4205 Post(s)
Liked 3,864 Times
in
2,312 Posts
Brass nipples break too. Just no where as common as Al ones. Generally we find that the spoke didn't enter the head of the nipple, it was a couple mms too short. Andy
__________________
AndrewRStewart
AndrewRStewart
#4
Senior Member
Join Date: May 2017
Location: Northampton, MA
Posts: 1,909
Bikes: 36" Unicycle, winter knock-around hybrid bike
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 930 Post(s)
Liked 393 Times
in
282 Posts
Why does that spoke have threads exposed below the nipple when the other one doesn't?
#5
Sr Member on Sr bikes
Thread Starter
As I've read...this is probably due to the fact that the spoke is just a mm or two too short and didn't thread into the head of the nipple...as suggested above. (Although I guess it appears that way because I unscrewed it a little bit.) It isn't the highest quality wheel, but it's in the neighborhood of 10 years old and this is the first time that's happened.
Dan
#6
Senior Member
Join Date: May 2017
Location: Northampton, MA
Posts: 1,909
Bikes: 36" Unicycle, winter knock-around hybrid bike
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 930 Post(s)
Liked 393 Times
in
282 Posts
I had a feeling someone would ask that. It's because I tried to unscrew it just to see if it was seized or not. I was able to do that easily with just my fingers. None of the others have thread exposed. It's only because I twisted just a bit.
As I've read...this is probably due to the fact that the spoke is just a mm or two too short and didn't thread into the head of the nipple...as suggested above. (Although I guess it appears that way because I unscrewed it a little bit.) It isn't the highest quality wheel, but it's in the neighborhood of 10 years old and this is the first time that's happened.
As I've read...this is probably due to the fact that the spoke is just a mm or two too short and didn't thread into the head of the nipple...as suggested above. (Although I guess it appears that way because I unscrewed it a little bit.) It isn't the highest quality wheel, but it's in the neighborhood of 10 years old and this is the first time that's happened.
Might be worth having a look at the spoke ends in the others even if it means sacrificing your rim tape
#7
Newbie
I experienced a similar nipple failure just recently when repairing a wheel. Head of nipple sheared level with bottom of slot. Ended up replacing all the nipples - false economy otherwise.
#8
Senior Member
Join Date: Dec 2007
Location: San Jose, California
Posts: 3,504
Bikes: 2001 Tommasini Sintesi w/ Campagnolo Daytona 10 Speed
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 145 Post(s)
Likes: 0
Liked 35 Times
in
30 Posts
#1 cause of broken nipples is spokes that are too short.
Nipples are fasteners, not spoke extenders.
A properly built wheel will have the spokes at least penetrating the thickness of the rim...which is usually is about 1mm below the screwdriver slot of the nipple.
Quality nipples with spokes too short will hold up longer, cheap nipples will break sooner.
=8-)
Nipples are fasteners, not spoke extenders.
A properly built wheel will have the spokes at least penetrating the thickness of the rim...which is usually is about 1mm below the screwdriver slot of the nipple.
Quality nipples with spokes too short will hold up longer, cheap nipples will break sooner.
=8-)
__________________
5000+ wheels built since 1984...
Disclaimer:
1. I do not claim to be an expert in bicycle mechanics despite my experience.
2. I like anyone will comment in other areas.
3. I do not own the preexisting concepts of DISH and ERD.
4. I will provide information as I always have to others that I believe will help them protect themselves from unscrupulous mechanics.
5. My all time favorite book is:
Kahane, Howard. Logic and Contemporary Rhetoric: The Use of Reason in Everyday Life
5000+ wheels built since 1984...
Disclaimer:
1. I do not claim to be an expert in bicycle mechanics despite my experience.
2. I like anyone will comment in other areas.
3. I do not own the preexisting concepts of DISH and ERD.
4. I will provide information as I always have to others that I believe will help them protect themselves from unscrupulous mechanics.
5. My all time favorite book is:
Kahane, Howard. Logic and Contemporary Rhetoric: The Use of Reason in Everyday Life
Likes For mrrabbit:
#9
Very Senior Member
Join Date: Mar 2018
Location: Always on the Run
Posts: 1,211
Bikes: Giant Quasar & Fuji Roubaix
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 413 Post(s)
Liked 343 Times
in
244 Posts
This is a (real) wheel question, not meaning to hijack the thread, but how do you determine what spoke length you'll need when all you have is a hub and a rim? I will never build a wheel, but I'm one of those curious old codgers if that's okay.
#10
Senior Member
Join Date: Mar 2008
Posts: 8,688
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1074 Post(s)
Liked 295 Times
in
222 Posts
With a bit of luck, you might find one that already have your hub and rim in its database.
If not, you need to feed it some numbers.
The number you’re looking for for the rim is the ERD - Effective Rim Diameter. Sometimes the manufacturer either list it or even prints it on the rim. If that is not the case, further enlightenment can be found by doing a net search on ”measuring ERD”.
Oh, and you need to tell it how many spokes and what pattern you want.
Then you need some numbers for the hub. You need the diameter of the circle of spoke holes in the flange, and where the flanges are in relation to the middle of the wheel axle.
Feed this into the calculator and see what it comes up with.
Do note that this is the quick explanation of how to go about it. Further study is recommended before actually ordering stuff or attempting a wheel build.
Likes For dabac:
#11
Very Senior Member
Join Date: Mar 2018
Location: Always on the Run
Posts: 1,211
Bikes: Giant Quasar & Fuji Roubaix
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 413 Post(s)
Liked 343 Times
in
244 Posts
First you do a net search for ”spoke length calculator”.
With a bit of luck, you might find one that already have your hub and rim in its database.
If not, you need to feed it some numbers.
The number you’re looking for for the rim is the ERD - Effective Rim Diameter. Sometimes the manufacturer either list it or even prints it on the rim. If that is not the case, further enlightenment can be found by doing a net search on ”measuring ERD”.
Oh, and you need to tell it how many spokes and what pattern you want.
Then you need some numbers for the hub. You need the diameter of the circle of spoke holes in the flange, and where the flanges are in relation to the middle of the wheel axle.
Feed this into the calculator and see what it comes up with.
Do note that this is the quick explanation of how to go about it. Further study is recommended before actually ordering stuff or attempting a wheel build.
With a bit of luck, you might find one that already have your hub and rim in its database.
If not, you need to feed it some numbers.
The number you’re looking for for the rim is the ERD - Effective Rim Diameter. Sometimes the manufacturer either list it or even prints it on the rim. If that is not the case, further enlightenment can be found by doing a net search on ”measuring ERD”.
Oh, and you need to tell it how many spokes and what pattern you want.
Then you need some numbers for the hub. You need the diameter of the circle of spoke holes in the flange, and where the flanges are in relation to the middle of the wheel axle.
Feed this into the calculator and see what it comes up with.
Do note that this is the quick explanation of how to go about it. Further study is recommended before actually ordering stuff or attempting a wheel build.
#12
Senior Member
Join Date: May 2017
Location: Northampton, MA
Posts: 1,909
Bikes: 36" Unicycle, winter knock-around hybrid bike
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 930 Post(s)
Liked 393 Times
in
282 Posts
Then you use a spoke calculator.
Building wheels is fun, really... 'course mine are amongst the simplest with no dish. And I only need one :-)
(I've also lucked out that the factory ERD specs on my rims were correct - I did the measurement only to confirm them using spokes purchased on the assumption they were correct, while formally you're not supposed to trust factory specs)
Last edited by UniChris; 07-03-20 at 07:01 PM.
Likes For UniChris: