Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

Oops Cannondale R2000: sometimes you lose

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

Oops Cannondale R2000: sometimes you lose

Old 07-03-20, 12:26 PM
  #1  
jdawginsc 
Edumacator
Thread Starter
 
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,425

Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...

Mentioned: 56 Post(s)
Tagged: 0 Thread(s)
Quoted: 2384 Post(s)
Liked 2,930 Times in 1,861 Posts
Oops Cannondale R2000: sometimes you lose

So I got this mostly as a could not resist excursion for the parts (full tri-color, plus wheels and early Ultegra brifters) but hoped to maybe sell the frame? Umm...nope. Did not want to back out and figured I’d probably save someone else from a horrible disfiguring accident...

anyone need a carbon fork for a ‘Dale? Haha.

$100 won’t kill me...the frame might have...



Dents...ok. Knew about those...

What the poop??? Looks like a failure ready to happen...

Nice tricolor drivetrain...

Uktegra brifters
jdawginsc is online now  
Old 07-03-20, 01:54 PM
  #2  
Homebrew01
Super Moderator
 
Homebrew01's Avatar
 
Join Date: Jul 2004
Location: Ffld Cnty Connecticut
Posts: 21,844

Bikes: Old Steelies I made, Old Cannondales

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1173 Post(s)
Liked 921 Times in 608 Posts
Those dents don't look life threatening.
__________________
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.

FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Homebrew01 is offline  
Likes For Homebrew01:
Old 07-03-20, 02:00 PM
  #3  
jdawginsc 
Edumacator
Thread Starter
 
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,425

Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...

Mentioned: 56 Post(s)
Tagged: 0 Thread(s)
Quoted: 2384 Post(s)
Liked 2,930 Times in 1,861 Posts
Originally Posted by Homebrew01
Those dents don't look life threatening.
It's the crimping of the dent on the seat stay. I'd have ridden it, but the sides of the indentation are somewhat sharpening...
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super












jdawginsc is online now  
Old 07-03-20, 02:07 PM
  #4  
jdawginsc 
Edumacator
Thread Starter
 
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,425

Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...

Mentioned: 56 Post(s)
Tagged: 0 Thread(s)
Quoted: 2384 Post(s)
Liked 2,930 Times in 1,861 Posts
This is a cleaner view


__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super












jdawginsc is online now  
Old 07-03-20, 03:08 PM
  #5  
Homebrew01
Super Moderator
 
Homebrew01's Avatar
 
Join Date: Jul 2004
Location: Ffld Cnty Connecticut
Posts: 21,844

Bikes: Old Steelies I made, Old Cannondales

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1173 Post(s)
Liked 921 Times in 608 Posts
I'd ride it.
__________________
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.

FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Homebrew01 is offline  
Old 07-03-20, 03:13 PM
  #6  
jdawginsc 
Edumacator
Thread Starter
 
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,425

Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...

Mentioned: 56 Post(s)
Tagged: 0 Thread(s)
Quoted: 2384 Post(s)
Liked 2,930 Times in 1,861 Posts
Originally Posted by Homebrew01
I'd ride it.
Seriously? Any experience with crimps like that one that start bulging through the paint?
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super












jdawginsc is online now  
Old 07-03-20, 03:19 PM
  #7  
Bianchigirll 
Bianchi Goddess
 
Bianchigirll's Avatar
 
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 29,716

Bikes: Too many to list here check my signature.

Mentioned: 191 Post(s)
Tagged: 2 Thread(s)
Quoted: 2910 Post(s)
Liked 2,829 Times in 1,456 Posts
__________________
One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"

Sugar "Kane" Kowalczyk
Bianchigirll is offline  
Likes For Bianchigirll:
Old 07-03-20, 05:04 PM
  #8  
Homebrew01
Super Moderator
 
Homebrew01's Avatar
 
Join Date: Jul 2004
Location: Ffld Cnty Connecticut
Posts: 21,844

Bikes: Old Steelies I made, Old Cannondales

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1173 Post(s)
Liked 921 Times in 608 Posts
Originally Posted by jdawginsc
Seriously? Any experience with crimps like that one that start bulging through the paint?
Ride it, then every now & then, compare it to the original picture. I bet it never gets worse.
__________________
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.

FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Homebrew01 is offline  
Old 07-03-20, 06:09 PM
  #9  
jdawginsc 
Edumacator
Thread Starter
 
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,425

Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...

Mentioned: 56 Post(s)
Tagged: 0 Thread(s)
Quoted: 2384 Post(s)
Liked 2,930 Times in 1,861 Posts
Originally Posted by Homebrew01
Ride it, then every now & then, compare it to the original picture. I bet it never gets worse.
Interesting, considering it is aluminum... I thought that dimples were more catastrophic to Cannondales/et al. than steel...I'll have to check alignment before putting my life at risk for the sake of the postulation, however.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super












jdawginsc is online now  
Old 07-03-20, 06:54 PM
  #10  
Homebrew01
Super Moderator
 
Homebrew01's Avatar
 
Join Date: Jul 2004
Location: Ffld Cnty Connecticut
Posts: 21,844

Bikes: Old Steelies I made, Old Cannondales

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1173 Post(s)
Liked 921 Times in 608 Posts
The alignment will be fine. Those older frames are rugged.
__________________
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.

FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Homebrew01 is offline  
Old 07-03-20, 07:18 PM
  #11  
jdawginsc 
Edumacator
Thread Starter
 
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,425

Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...

Mentioned: 56 Post(s)
Tagged: 0 Thread(s)
Quoted: 2384 Post(s)
Liked 2,930 Times in 1,861 Posts
Originally Posted by Homebrew01
The alignment will be fine. Those older frames are rugged.
I'll take the dip and experiment and see how many teeth I return with...
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super












jdawginsc is online now  
Old 07-03-20, 11:08 PM
  #12  
Russ Roth
Senior Member
 
Join Date: Dec 2019
Location: South Shore of Long Island
Posts: 2,762

Bikes: 2010 Carrera Volans, 2015 C-Dale Trail 2sl, 2017 Raleigh Rush Hour, 2017 Blue Proseccio, 1992 Giant Perigee, 80s Gitane Rallye Tandem

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1073 Post(s)
Liked 999 Times in 710 Posts
I certainly wouldn't ride it, dents can happen but that's an extremely large number. With that much damage I'd also wonder what the fork has been through and hold off riding it. Nice price for all the parts, but I'd toss the frame.
Russ Roth is offline  
Old 07-04-20, 12:20 AM
  #13  
Lascauxcaveman 
Senior Member
 
Lascauxcaveman's Avatar
 
Join Date: Nov 2011
Location: Port Angeles, WA
Posts: 8,016

Bikes: A green one, "Ragleigh," or something.

Mentioned: 194 Post(s)
Tagged: 0 Thread(s)
Quoted: 1627 Post(s)
Liked 629 Times in 355 Posts
That is one certainly beat-ass frame; it's almost like someone was sorta half-heartedly attacking it with a 9-iron or something.

I bet it'd hold up under normal riding though. As said above, those frames are pretty tough. Either way, $l00 for that group is a solid deal
__________________
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●

Lascauxcaveman is offline  
Old 07-04-20, 04:42 PM
  #14  
shelbyfv
Expired Member
 
shelbyfv's Avatar
 
Join Date: Jun 2007
Location: TN
Posts: 11,453
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3634 Post(s)
Liked 5,310 Times in 2,698 Posts
That stay looks like it's ready to buckle. It may not kill you but why bother with it? You could waste a lot of time building the thing up to ride and never be comfortable with it. I'd strip it, cut it up and move on.
shelbyfv is offline  
Old 07-04-20, 04:48 PM
  #15  
Trakhak
Senior Member
 
Trakhak's Avatar
 
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,337
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2428 Post(s)
Liked 2,873 Times in 1,643 Posts
I'd ride it and just keep an eye on the dents, as several people have already suggested. Seatstays don't undergo much stress, especially compared to chainstays.
Trakhak is offline  
Old 07-04-20, 05:19 PM
  #16  
jdawginsc 
Edumacator
Thread Starter
 
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,425

Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...

Mentioned: 56 Post(s)
Tagged: 0 Thread(s)
Quoted: 2384 Post(s)
Liked 2,930 Times in 1,861 Posts
I already have a similar frame that is a bit earlier ('87), and really was buying it for the parts.

I might make a wind-chime out of it!
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super












jdawginsc is online now  
Likes For jdawginsc:
Old 07-04-20, 06:36 PM
  #17  
rosefarts
With a mighty wind
 
Join Date: May 2015
Posts: 2,554
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1072 Post(s)
Liked 841 Times in 475 Posts
Originally Posted by jdawginsc
I already have a similar frame that is a bit earlier ('87), and really was buying it for the parts.

I might make a wind-chime out of it!
I always thought an old C-dale would be great to make lugs out of for a bamboo bike project.
rosefarts is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.