Giant TCX saddle clamp bolt size?
#1
Senior Member
Thread Starter
Giant TCX saddle clamp bolt size?
Hi,
I have a Giant TCX Advanced Pro 2 with a carbon D-fuse seat post. I need to adjust my saddle after it shifted going over a bump, but found that none of my Hex wrenches fit the saddle clamp bolt.
Does anyone know if this is a Torx or Hex bolt? - mine seems to be rather chewed up and it's difficult to tell.
The bolt head is much bigger than a Torx T-25, but seems too small for a 5mm Allen key. 4mm keys are also too small, so it seems to be something in between which is very odd!
I think in the past I had used a larger Torx head (T30?) - but can't recall.
Can anyone help?
Thanks!
I have a Giant TCX Advanced Pro 2 with a carbon D-fuse seat post. I need to adjust my saddle after it shifted going over a bump, but found that none of my Hex wrenches fit the saddle clamp bolt.
Does anyone know if this is a Torx or Hex bolt? - mine seems to be rather chewed up and it's difficult to tell.
The bolt head is much bigger than a Torx T-25, but seems too small for a 5mm Allen key. 4mm keys are also too small, so it seems to be something in between which is very odd!
I think in the past I had used a larger Torx head (T30?) - but can't recall.
Can anyone help?
Thanks!
#2
Senior Member
Join Date: Jun 2012
Location: Stillwater, OK
Posts: 7,827
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 1872 Post(s)
Liked 692 Times
in
468 Posts
Hi,
I have a Giant TCX Advanced Pro 2 with a carbon D-fuse seat post. I need to adjust my saddle after it shifted going over a bump, but found that none of my Hex wrenches fit the saddle clamp bolt.
Does anyone know if this is a Torx or Hex bolt? - mine seems to be rather chewed up and it's difficult to tell.
The bolt head is much bigger than a Torx T-25, but seems too small for a 5mm Allen key. 4mm keys are also too small, so it seems to be something in between which is very odd!
I think in the past I had used a larger Torx head (T30?) - but can't recall.
Can anyone help?
Thanks!
I have a Giant TCX Advanced Pro 2 with a carbon D-fuse seat post. I need to adjust my saddle after it shifted going over a bump, but found that none of my Hex wrenches fit the saddle clamp bolt.
Does anyone know if this is a Torx or Hex bolt? - mine seems to be rather chewed up and it's difficult to tell.
The bolt head is much bigger than a Torx T-25, but seems too small for a 5mm Allen key. 4mm keys are also too small, so it seems to be something in between which is very odd!
I think in the past I had used a larger Torx head (T30?) - but can't recall.
Can anyone help?
Thanks!
__________________
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
#3
Senior Member
Thread Starter
Thanks. Ths T30 fits quite well, which is why I’m wondering whether it *is* actually a T30 bolt originally. It just seems an odd choice if it is true. Normally they are 5mm bolts, right?
Thread
Thread Starter
Forum
Replies
Last Post
TreyWestgate
General Cycling Discussion
19
12-11-16 08:19 AM
OneGoodLeg
Bicycle Mechanics
6
04-24-13 05:48 PM