Go Back  Bike Forums > Bike Forums > Road Cycling
Reload this Page >

Crank Arm Length

Notices
Road Cycling It is by riding a bicycle that you learn the contours of a country best, since you have to sweat up the hills and coast down them. Thus you remember them as they actually are, while in a motor car only a high hill impresses you, and you have no such accurate remembrance of country you have driven through as you gain by riding a bicycle. -- Ernest Hemingway

Crank Arm Length

Old 02-14-20, 03:08 AM
  #26  
Fox Farm
Senior Member
 
Fox Farm's Avatar
 
Join Date: Aug 2004
Location: Prague, Czech Republic
Posts: 2,588

Bikes: Merlin Extra Light, Orbea Orca, Ritchey Outback,Tomac Revolver Mountain Bike, Cannondale Crit 3.0 now used for time trials.

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 73 Post(s)
Liked 5 Times in 4 Posts
Originally Posted by HTupolev View Post
Longer cranks give your legs a tiny bit more leverage over the gear, not less.
Yes exactly this. I was going to post a similar observation.

I am 6'2" with 34" inseam and ride a 59-60 frame (center to center non compact) and have always used a 175 crank arm. Most bikes in L or XL will be built with a 175.

Some years ago I borrowed a bike for a weekend ride (was out of town visiting). It was a 57 I think with 172.5 crank arms. I noticed the difference immediately. Less leverage or torque forcing me to always change gears where as with my 175s I could always use the leverage a little bit.
Fox Farm is offline  
Old 02-14-20, 03:29 AM
  #27  
canklecat
Me duelen las nalgas
 
canklecat's Avatar
 
Join Date: Aug 2015
Location: Texas
Posts: 10,341

Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel

Mentioned: 179 Post(s)
Tagged: 0 Thread(s)
Quoted: 3278 Post(s)
Liked 596 Times in 424 Posts
Welp, after my long post on Feb 8th, I solved my knee twinge issue by switching the entire crankset, including shorter cranks, to the other bike.

The steel bike with 172.5 cranks and round 50/39 chainrings didn't give me any problems. Nor did the 170 cranks with 52/42 Biopace on the carbon fiber bike.

But swapping the Biopace chainrings to the bike with 172.5 caused minor knee problems that persisted for a couple of weeks.

So this week I switched the entire crankset -- 170 cranks and Biopace rings -- to the steel bike. Knee problem gone.

I'm surprised such a minute difference in length made so much difference. But the eccentric, oblong Biopace rings felt surge-y, pulse-y and weird with longer cranks. Paired back with the original shorter cranks they feel right again. The shorter stroke feels more efficient to me.

Now I'm rethinking my cavalier attitude toward crank lengths. I might just switch all my bikes to 170 now. At 62 I've managed to avoid serious knee problems despite many accidents and a family history of deteriorating knees. I'd like to keep 'em healthy as long as possible.
canklecat is offline  
Likes For canklecat:
Old 02-15-20, 09:34 AM
  #28  
Kabuki12
Senior Member
 
Kabuki12's Avatar
 
Join Date: Jan 2016
Location: Ventura County ,California
Posts: 684

Bikes: 1973 Windsor Profesional,1976 Kabuki diamond formula with full Campy, 1977 Raleigh Competition GS , 1971 Stella original Campy equip. 1978 Raleigh Super Grand Prix, 1972 Italvega Gran Rally ,1972 Super Mondia Special,Medici Pro Strada

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 150 Post(s)
Likes: 0
Liked 107 Times in 77 Posts
I am 6'+ and a 35" inseam . Most of my bikes(vintage racers) are either 24" or 25" frames. I only have one bike with 175 cranks , the others are 170 and to be honest I can't tell the difference . My concern when I restored the bike with the 175 cranks was ground clearance and that was not an issue. Joe
Kabuki12 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.