Go Back  Bike Forums > Bike Forums > Road Cycling
Reload this Page >

Bike Shop Etiquette Question

Notices
Road Cycling “It is by riding a bicycle that you learn the contours of a country best, since you have to sweat up the hills and coast down them. Thus you remember them as they actually are, while in a motor car only a high hill impresses you, and you have no such accurate remembrance of country you have driven through as you gain by riding a bicycle.” -- Ernest Hemingway

Bike Shop Etiquette Question

Old 05-23-20, 07:20 PM
  #1  
So Square
Junior Member
Thread Starter
 
Join Date: May 2014
Location: Seattle
Posts: 10

Bikes: Lynskey Cooper

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Bike Shop Etiquette Question

If you took your bike to a shop for repairs, when you picked the bike up, would you expect the seat/seat post to be in the same position as it was when you dropped it off, or completely moved from where you had it dialed in?
So Square is offline  
Old 05-23-20, 07:32 PM
  #2  
WorldIRC
Canadian eh?
 
Join Date: May 2002
Location: Toronto
Posts: 2,135

Bikes: 2020 Specialized Roubaix Expert

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 131 Post(s)
Liked 96 Times in 54 Posts
Dialed in
WorldIRC is offline  
Old 05-23-20, 07:45 PM
  #3  
Carbonfiberboy 
just another gosling
 
Carbonfiberboy's Avatar
 
Join Date: Feb 2007
Location: Everett, WA
Posts: 19,501

Bikes: CoMo Speedster 2003, Trek 5200, CAAD 9, Fred 2004

Mentioned: 115 Post(s)
Tagged: 0 Thread(s)
Quoted: 3873 Post(s)
Liked 1,920 Times in 1,369 Posts
The etiquette is in what you do about it if they've moved it from the way you had it. You do them a favor and tell them about it, that's all. I tell bike shops about it if anything's wrong when I've had something done. One thing I've learned to do is to check the torque on my cassette if I even think they might have messed with it - that's after having a cassette come completely loose on a ride. I've found it too loose a couple times since then, different shops.
__________________
Results matter
Carbonfiberboy is offline  
Old 05-23-20, 07:48 PM
  #4  
noodle soup
Senior Member
 
noodle soup's Avatar
 
Join Date: Nov 2015
Posts: 8,922
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 4717 Post(s)
Liked 1,882 Times in 998 Posts
I always mark the seatpost prior to moving it, and replace it to the original position.
noodle soup is offline  
Old 05-23-20, 07:51 PM
  #5  
GlennR
On Your Left
 
GlennR's Avatar
 
Join Date: Nov 2011
Location: Long Island, New York, USA
Posts: 8,373

Bikes: Trek Emonda SLR, Sram eTap, Zipp 303

Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 3004 Post(s)
Liked 2,433 Times in 1,187 Posts
It should come back the same. They should of marked it with tape.
GlennR is offline  
Likes For GlennR:
Old 05-23-20, 07:58 PM
  #6  
WorldIRC
Canadian eh?
 
Join Date: May 2002
Location: Toronto
Posts: 2,135

Bikes: 2020 Specialized Roubaix Expert

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 131 Post(s)
Liked 96 Times in 54 Posts
Originally Posted by GlennR
It should come back the same. They should of marked it with tape.
This was our practice when I worked at my LBS a decade ago.
WorldIRC is offline  
Likes For WorldIRC:
Old 05-23-20, 08:33 PM
  #7  
Russ Roth
Senior Member
 
Join Date: Dec 2019
Location: South Shore of Long Island
Posts: 2,762

Bikes: 2010 Carrera Volans, 2015 C-Dale Trail 2sl, 2017 Raleigh Rush Hour, 2017 Blue Proseccio, 1992 Giant Perigee, 80s Gitane Rallye Tandem

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1073 Post(s)
Liked 999 Times in 710 Posts
Originally Posted by WorldIRC
This was our practice when I worked at my LBS a decade ago.
And is still the practice of any good mechanic as far as I'm concerned. My own aluminum I mark, anything else tape.
Russ Roth is offline  
Likes For Russ Roth:
Old 05-23-20, 10:39 PM
  #8  
NoWhammies
Senior Member
 
NoWhammies's Avatar
 
Join Date: Jul 2017
Location: Pacific Northwest
Posts: 1,993

Bikes: Argon 18 Gallium, BH G7, Rocky Mountain Instinct C70

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 800 Post(s)
Liked 512 Times in 306 Posts
Dialed in.
NoWhammies is offline  
Old 05-23-20, 11:26 PM
  #9  
znomit
Zoom zoom zoom zoom bonk
 
znomit's Avatar
 
Join Date: Sep 2006
Location: New Zealand
Posts: 4,623

Bikes: Giant Defy, Trek 1.7c, BMC GF02, Fuji Tahoe, Scott Sub 35, Kona Rove, Trek Verve+2

Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 549 Post(s)
Liked 721 Times in 365 Posts
You should expect it to be set back correctly, but be prepared in case it's not.
znomit is offline  
Likes For znomit:
Old 05-24-20, 01:07 AM
  #10  
So Square
Junior Member
Thread Starter
 
Join Date: May 2014
Location: Seattle
Posts: 10

Bikes: Lynskey Cooper

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Thanks for the feedback. Good, I’m not crazy. Yeah, it’s seems like incredibly lazy workmanship. I didn’t catch it until I got my bike home, so I had no discussion with the shop. I did however post this exact same question on a local Facebook cycling group and to my surprise everyone said it shouldn’t be expected, that the seat can come back where ever, because the bike mechanic may have had to take it for a test ride, or they may have needed to lower the seat to work on it in the repair stand. Just seems lazy.
So Square is offline  
Old 05-24-20, 03:12 AM
  #11  
guadzilla
Pointy Helmet Tribe
 
guadzilla's Avatar
 
Join Date: Feb 2009
Location: Offthebackistan
Posts: 4,338

Bikes: R5, Allez Sprint, Shiv

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 519 Post(s)
Liked 627 Times in 295 Posts
Could just be an oversight...
guadzilla is offline  
Likes For guadzilla:
Old 05-24-20, 09:55 AM
  #12  
popeye
Senior Member
 
Join Date: Nov 2004
Location: Newport Beach, CA
Posts: 1,935

Bikes: S works Tarmac, Felt TK2 track

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 359 Post(s)
Liked 179 Times in 111 Posts
I have no faith in getting anything right back from a shop.
popeye is offline  
Old 05-24-20, 09:58 AM
  #13  
noodle soup
Senior Member
 
noodle soup's Avatar
 
Join Date: Nov 2015
Posts: 8,922
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 4717 Post(s)
Liked 1,882 Times in 998 Posts
Originally Posted by So Square
Thanks for the feedback. Good, I’m not crazy. Yeah, it’s seems like incredibly lazy workmanship. I didn’t catch it until I got my bike home, so I had no discussion with the shop. I did however post this exact same question on a local Facebook cycling group and to my surprise everyone said it shouldn’t be expected, that the seat can come back where ever, because the bike mechanic may have had to take it for a test ride, or they may have needed to lower the seat to work on it in the repair stand. Just seems lazy.
Originally Posted by guadzilla
Could just be an oversight...
That's my guess
noodle soup is offline  
Old 05-24-20, 11:18 AM
  #14  
blazin
Blazer of saddles, trails
 
Join Date: Dec 2016
Location: Inside the Beltway
Posts: 209
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 115 Post(s)
Liked 33 Times in 25 Posts
Originally Posted by Carbonfiberboy
The etiquette is in what you do about it if they've moved it from the way you had it.
And in what the shop does when you politely tell them about it.

I once told a shop, that I had used for the first time, that the bike I picked up from them had the seat post not returned to its original position. I didn’t think it was a big, but I figured the manager might want to know about it to remind his service staff about proper SOP.

The guy behind the desk didn’t take his eyes off the TV and replied with something to the effect of, “Next time we don’t have to test ride it.” I haven’t been back to that store since.
blazin is offline  
Likes For blazin:
Old 05-24-20, 11:21 AM
  #15  
Carbonfiberboy 
just another gosling
 
Carbonfiberboy's Avatar
 
Join Date: Feb 2007
Location: Everett, WA
Posts: 19,501

Bikes: CoMo Speedster 2003, Trek 5200, CAAD 9, Fred 2004

Mentioned: 115 Post(s)
Tagged: 0 Thread(s)
Quoted: 3873 Post(s)
Liked 1,920 Times in 1,369 Posts
Originally Posted by blazin
And in what the shop does when you politely tell them about it.

I once told a shop, that I had used for the first time, that the bike I picked up from them had the seat post not returned to its original position. I didn’t think it was a big, but I figured the manager might want to know about it to remind his service staff about proper SOP.

The guy behind the desk didn’t take his eyes off the TV and replied with something to the effect of, “Next time we don’t have to test ride it.” I haven’t been back to that store since.
At the LBS I use, the bike comes back exactly as I left it, minus its issues, whatever they were, plus it's cleaner. They know I don't take it anywhere else.
__________________
Results matter
Carbonfiberboy is offline  
Likes For Carbonfiberboy:
Old 05-24-20, 11:41 AM
  #16  
blazin
Blazer of saddles, trails
 
Join Date: Dec 2016
Location: Inside the Beltway
Posts: 209
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 115 Post(s)
Liked 33 Times in 25 Posts
Originally Posted by Carbonfiberboy
At the LBS I use, the bike comes back exactly as I left it, minus its issues, whatever they were, plus it's cleaner. They know I don't take it anywhere else.
If I could find a shop like that, I’d never go anywhere else either!
blazin is offline  
Old 05-24-20, 02:04 PM
  #17  
UsedToBeFaster
Senior Member
 
Join Date: Aug 2019
Posts: 165
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 125 Post(s)
Liked 18 Times in 14 Posts
Originally Posted by blazin
If I could find a shop like that, I’d never go anywhere else either!
it suddenly seems to be the case that some areas of blessed with wonderful bike shops and others are cursed!
UsedToBeFaster is offline  
Old 05-26-20, 07:23 AM
  #18  
Kabuki12
Senior Member
 
Join Date: Jan 2016
Posts: 3,405
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 863 Post(s)
Liked 2,226 Times in 1,249 Posts
My LBS marks with tape. I don't go often as I enjoy doing the work myself and have most of the tools I need. There are a few times that I just don't have the time and I take it in to a shop that has been around since the seventies and is familiar with my old steel racers. I always get a good job out of them and my bike is always road ready when I pick it up. The only time I can remember a hiccup is when I took my Raleigh Comp GS rear wheel in to have the drive side spokes replaced after a derailleur failed and allowed my chain to mangle the spokes. When I picked up the wheel it didn't have rim tape put back on . When I asked them the guy apologized and went over to the work station where he had my cloth Velox tape rolled up and asked if I wanted him to put it back on for me. He was busy that day and I said thank you , no , I can handle the task and thanked him again for keeping track of things . I was not really concerned that much , but they know how I am about my vintage bikes and are very good about this kind of thing. The wheel was true and that was my main concern, Joe
Kabuki12 is offline  
Old 05-26-20, 10:18 AM
  #19  
Psimet2001 
I eat carbide.
 
Psimet2001's Avatar
 
Join Date: Jan 2006
Location: Elgin, IL
Posts: 21,627

Bikes: Lots. Van Dessel and Squid Dealer

Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1325 Post(s)
Liked 1,306 Times in 560 Posts
As a shop I will mark any post before I move it and will move it back afterwards. I usually only move it if I have to. There are occasions where it slips my mind to move it back. No ill will intended - just a lot of other things to be focused on. I usually remember before it leaves though...

Don't condemn a shop if they forgot to move it back. Ask them about it.

For yourself - if your position is tweaked and was hard to get to then document it so you have it for your own records.
__________________
PSIMET Wheels, PSIMET Racing, PSIMET Neutral Race Support, and 11 Jackson Coffee
Podcast - YouTube Channel
Video about PSIMET Wheels

Psimet2001 is offline  
Likes For Psimet2001:
Old 05-26-20, 10:24 AM
  #20  
noodle soup
Senior Member
 
noodle soup's Avatar
 
Join Date: Nov 2015
Posts: 8,922
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 4717 Post(s)
Liked 1,882 Times in 998 Posts
Originally Posted by Psimet2001

Don't condemn a shop if they forgot to move it back. Ask them about it.

For yourself - if your position is tweaked and was hard to get to then document it so you have it for your own records.
Right now most shops are crazy busy with service work, and mechanics are constantly getting distracted by people that need help with purchases.
noodle soup is offline  
Old 05-26-20, 10:37 AM
  #21  
CliffordK
Senior Member
 
CliffordK's Avatar
 
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,600
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18320 Post(s)
Liked 4,489 Times in 3,338 Posts
Is this for test rides, perhaps with tall cyclists and short mechanics?

How many actually need test rides?
CliffordK is offline  
Old 05-26-20, 10:41 AM
  #22  
noodle soup
Senior Member
 
noodle soup's Avatar
 
Join Date: Nov 2015
Posts: 8,922
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 4717 Post(s)
Liked 1,882 Times in 998 Posts
Originally Posted by CliffordK
Is this for test rides, perhaps with tall cyclists and short mechanics?
Most likely it's put the bike on the workstand.
noodle soup is offline  
Likes For noodle soup:
Old 06-06-20, 09:08 AM
  #23  
kraftwerk 
my nice bike is at home
 
kraftwerk's Avatar
 
Join Date: Feb 2006
Location: Brooklyn, NY USA
Posts: 954

Bikes: 2011 BMC Race Machine / 2012 BMC Road Machine / Trek 2300 / '90's Merlin/ '70's Raleigh 20/ Ti-'swift' folder / Erickson w/S&S couplers

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 66 Post(s)
Liked 34 Times in 24 Posts
THIS:

"Most likely it's put the bike on the work stand."
__________________
BMC Race Machine / BMC Team Machine / Rossin Record / 80's Pinarello Traviso / Merlin MTB / Raleigh "Folding 20" / Ti-Swift (!)
Erikson w/C&C couplers / Trek's: 2300, 1200, 990 / Jamis 'Sputnik'

kraftwerk is offline  
Old 06-06-20, 10:20 AM
  #24  
CAT7RDR
Senior Member
 
Join Date: May 2017
Location: Hacienda Hgts
Posts: 2,084

Bikes: 1999 Schwinn Peloton Ultegra 10, Kestrel RT-1000 Ultegra, Trek Marlin 6 Deore 29'er

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 811 Post(s)
Liked 1,946 Times in 936 Posts
If I ask the shop mechanic to test ride a drive train issue and the saddle post has been moved, I consider it a sign of a good shop interested in what I have to say on problem solving issues. I already know what my proper saddle height is and can reset accordingly.
CAT7RDR is online now  
Old 06-06-20, 10:26 AM
  #25  
Tacoenthusiast
Senior Member
 
Join Date: Mar 2020
Posts: 232
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 127 Post(s)
Liked 223 Times in 84 Posts
Drive back across town and demand that they put it back!!!


Or just put it back yourself, adjusting seat height is pretty simple

Not worth making a huge fuss and spend an hour of your life on something you can fix in 5 minutes max


​​​​​​
Tacoenthusiast is offline  
Likes For Tacoenthusiast:

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.