Grinding/vibration under load
#1
Senior Member
Thread Starter
Grinding/vibration under load
I am getting a strange grinding/vibration through the pedals on certain gears. I notice it when in the 2nd and 3rd largest cogs in the back and the big ring up front. Originally I thought it was cross-chaining, but when I go into the biggest cog on the back I don't seem to hear it. It also only seems to happen when under heavy load (e.g. climbing out of saddle).
I am riding an 11-spd Ultegra Di2. Chain/cassette have less than 2k miles on them and the bike is shifting well.
I can't for the life of me figure out what is going on. Any insights would be much appreciated!
I am riding an 11-spd Ultegra Di2. Chain/cassette have less than 2k miles on them and the bike is shifting well.
I can't for the life of me figure out what is going on. Any insights would be much appreciated!
#3
Senior Member
#4
- Soli Deo Gloria -
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,779
Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix
Mentioned: 235 Post(s)
Tagged: 0 Thread(s)
Quoted: 6844 Post(s)
Liked 736 Times
in
469 Posts
Chordal action?
2.2.1 Chordal Action
It is supposed to increase with smaller sprockets but riding fixed gear I find that some front/rear combinations just seem worse regardless of sprocket size.
-Tim-
2.2.1 Chordal Action
It is supposed to increase with smaller sprockets but riding fixed gear I find that some front/rear combinations just seem worse regardless of sprocket size.
-Tim-
Thread
Thread Starter
Forum
Replies
Last Post
MoreLowGears
Road Cycling
3
06-23-19 01:44 PM
rbk_3
Road Cycling
62
07-28-17 12:19 PM