Just ordered a Brompton, and of Course i have Questions
#1
Junior Member
Thread Starter
Join Date: Jan 2013
Location: NYC
Posts: 12
Bikes: Waiting for my Brompton
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Just ordered a Brompton, and of Course i have Questions
Hello everyone, this is my first post, and just last week i ordered a B-spoke Brompton. I ordered the H3L with the telescopic seat(im 6ft, 175lbs) and the brooks saddle, im getting the body in racing green and the rest in black, i dont think i need to post a pic, you all seem to know your stuff. Before I ask my questions let me give you all some of my cycling background, i grew up riding bikes in upstate NY but once i started driving and got a car biking fell to the side, but i now live in manhattan and havent bike ridden in several up until a few weeks i was on an extended vacation to miami, where i used a generic walmart bicycle that one of my cousins have, and i found myself doing a 10 mile ride everyday and this was one my favorite things to do on my trip. So i started researching bikes to buy to keep in manhattan and i came across the folding bike category that i didnt know existed until two weeks ago, and fits perfectly the small manhattan apt lifestyle. I quickly discovered through some research that brompton is the best and after scouring this forum and really anything i could read online about the subject i pulled the trigger and ordered my brompton from nyce wheels.( I am of the opinion BUY RIGHT, BUY ONCE) and waiting 6-8 weeks works out perfectly for me because its to cold, wet, and snowy, now and in 8 weeks i will be back in FL so i even went ahead and ordered the B&W hard case. Now for the Questions.
- So ordered the 2013 model does that include the brompton tool or is that sold separately?
- What is the general opinion of the including pump, is it worth carrying or cqn you recommend a higher quality pump with built in gauge that fits on the mount or not, i usually carry a back pack(I didnt get the carrier block, i like back packs)?
- i was thinking of ordering new grips b/c everyone says such nasty things about the brompton ones, does ergon gp3 biocork effect the fold at all?
- I need to order a helmet, I see there are many very high quality helmets out there for the serious riders, but im looking more for something that fits the classic cool styling of the brompton and fits my color scheme with out compromising one drop on safety?
- Also any recommendations of an oil or grease on hand for the chain or any other contact points that may need some occasional lubricating?
- and last but not least any other thoughts or insights that i may have overlooked or not know about would be greatly appreciated.
Thank you all for your time,
Alex
- So ordered the 2013 model does that include the brompton tool or is that sold separately?
- What is the general opinion of the including pump, is it worth carrying or cqn you recommend a higher quality pump with built in gauge that fits on the mount or not, i usually carry a back pack(I didnt get the carrier block, i like back packs)?
- i was thinking of ordering new grips b/c everyone says such nasty things about the brompton ones, does ergon gp3 biocork effect the fold at all?
- I need to order a helmet, I see there are many very high quality helmets out there for the serious riders, but im looking more for something that fits the classic cool styling of the brompton and fits my color scheme with out compromising one drop on safety?
- Also any recommendations of an oil or grease on hand for the chain or any other contact points that may need some occasional lubricating?
- and last but not least any other thoughts or insights that i may have overlooked or not know about would be greatly appreciated.
Thank you all for your time,
Alex
#2
LET'S ROLL
After reading some posts and blogs about people carrying their Brompton
on planes and stuffing it in the overhead compartments I got curious. I
travel a bit and would really enjoy having a bike with on my travels. I have
a folding bike with 20 in. wheels and it was a lot of work to stuff in my
regulation check-in luggage. I was at Nyce Wheels today checking out their
stock. I'm not familiar with the pump that comes with Brommies, but a lot
of bikers like to carry Topeak's Morph pump.
Snug Harbor: https://www.youtube.com/watch?v=IFj80L5e3no
on planes and stuffing it in the overhead compartments I got curious. I
travel a bit and would really enjoy having a bike with on my travels. I have
a folding bike with 20 in. wheels and it was a lot of work to stuff in my
regulation check-in luggage. I was at Nyce Wheels today checking out their
stock. I'm not familiar with the pump that comes with Brommies, but a lot
of bikers like to carry Topeak's Morph pump.
Snug Harbor: https://www.youtube.com/watch?v=IFj80L5e3no
__________________
One day: www.youtube.com/watch?v=20X43026ukY&list=UUHyRS8bRu6zPoymgKaIoDLA&index=1
One day: www.youtube.com/watch?v=20X43026ukY&list=UUHyRS8bRu6zPoymgKaIoDLA&index=1
#3
Senior Member
Join Date: Aug 2012
Location: NYC
Posts: 2,380
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 151 Post(s)
Likes: 0
Liked 10 Times
in
8 Posts
check out bfold also. a really great shop in the east village. primo customer service.
https://www.bfold.com/StoreFrameset.htm
to OP, what's your inseam? i'm also 6' with a 33" inseam and i did not need the telescopic seat post..
https://www.bfold.com/StoreFrameset.htm
to OP, what's your inseam? i'm also 6' with a 33" inseam and i did not need the telescopic seat post..
#4
Senior Member
Did you get it from NYCE Wheels?
#5
Junior Member
Thread Starter
Join Date: Jan 2013
Location: NYC
Posts: 12
Bikes: Waiting for my Brompton
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
check out bfold also. a really great shop in the east village. primo customer service.
https://www.bfold.com/StoreFrameset.htm
to OP, what's your inseam? i'm also 6' with a 33" inseam and i did not need the telescopic seat post..
https://www.bfold.com/StoreFrameset.htm
to OP, what's your inseam? i'm also 6' with a 33" inseam and i did not need the telescopic seat post..
#6
Banned
I have GP3 grips, on my M3L the Biocork are not in the same length options as the 2 gripshift ones, I got .
they're shorter..
so You will have to cut them down in length, [others have done this..]
the black and grey ones are offered in alternate additional lengths.
I like the handling improvement of having a bag with weight in it, on the Front, luggage rack..
now Shimano makes a Hub Dynamo for Brompton, Schmidt did so many years ago..
for jump on and just, ride lights..
stock is 50:13. optional crank rings have been 44 & 54t, hub cog 14 and 15 t..
they're shorter..
so You will have to cut them down in length, [others have done this..]
the black and grey ones are offered in alternate additional lengths.
I like the handling improvement of having a bag with weight in it, on the Front, luggage rack..
now Shimano makes a Hub Dynamo for Brompton, Schmidt did so many years ago..
for jump on and just, ride lights..
stock is 50:13. optional crank rings have been 44 & 54t, hub cog 14 and 15 t..
Last edited by fietsbob; 01-29-13 at 08:00 PM.
#8
Junior Member
Thread Starter
Join Date: Jan 2013
Location: NYC
Posts: 12
Bikes: Waiting for my Brompton
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have GP3 grips, on my M3L the Biocork are not in the same length options as the 2 gripshift ones, I got .
so You will have to cut them down in length, [others have done this..]
the black and grey ones are offered in alternate additional lengths.
I like the handling improvement of having a bag with weight in it, on the Front, luggage rack..
so You will have to cut them down in length, [others have done this..]
the black and grey ones are offered in alternate additional lengths.
I like the handling improvement of having a bag with weight in it, on the Front, luggage rack..
Do you mean cutting the height of the side handle or the width to fit it on the bar, thanks
#9
Senior Member
Join Date: Aug 2012
Location: NYC
Posts: 2,380
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 151 Post(s)
Likes: 0
Liked 10 Times
in
8 Posts
you must cut the width so as to avoid hitting the brake levers. i have the ergon gc2 grips with mini bar-ends. love them.
https://www.backcountry.com/ergon-gc2-grip
https://www.backcountry.com/ergon-gc2-grip
Last edited by smallwheeler; 01-29-13 at 08:03 PM.
#10
Banned
Do you mean cutting the height of the side handle or the width to fit it on the bar, thanks
before hitting the brake lever, to have the clamping bolt on the grip, around the handlebar..
so you cut down the inner end of the Grip.
Or just get the shorter grip shift version in the lower cost black grip..
the bar end will be black in all cases anyhow..
https://www.ergon-bike.com/us/en/product/gp3-biokork
Vs https://www.ergon-bike.com/us/en/product/gp3
Last edited by fietsbob; 01-29-13 at 08:15 PM.
#11
Junior Member
Thread Starter
Join Date: Jan 2013
Location: NYC
Posts: 12
Bikes: Waiting for my Brompton
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Ok good to know, I plan on riding the bike for a little before I make a decision on the grips, If I get the grips that do not require extra cutting are the fairly simple to install myself or am I better going through the LBS
#12
Banned
cannot judge your mechanical chops from a computer on the opposite coast..
might need help blowing the stock grip off, and an air-compressor in the Bike shop makes that simple.
the GR3 twin Gripshift version is easy to install after that.
might need help blowing the stock grip off, and an air-compressor in the Bike shop makes that simple.
the GR3 twin Gripshift version is easy to install after that.
#13
Junior Member
Thread Starter
Join Date: Jan 2013
Location: NYC
Posts: 12
Bikes: Waiting for my Brompton
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Now that I know an air compressor is involved, I will definitely do it myself
#15
Senior Member
asr3510... I posted instructions and pictures last year on installing Ergon grips on my Brompton. I'm guessing it's still applicable to what you want to do. It's pretty straight forward - takes about 30 minutes to 45 minutes.
https://www.bikeforums.net/showthread...zonation+ergon
Why do you have to wait 6 to 8 weeks? I thought NYCE Wheels had most configurations in stock?
As for your questions:
- No idea if the 2013 model comes with the Brompton tool. I'm guessing no. It might be cheaper to assemble your own tools and bundle them into a small bag.
- I think, frankly, that the included pump sucks. No polite way to put it. It's great for an emergency, but for regular inflation, get a third party pump. Because you normally want to run the tires at significantly higher pressure than larger tires, get a pump that: 1) can fold out to include a little foot rest to stabilize the feet by stepping on it; 2) a built in gauge otherwise you'll have to keep checking with a hand gauge; 3) has a comfortable foldable T-style handle - you're going to be exerting a lot of force to get a high volume of air into those small tires. I have an Axiom Enforcer hand pump.
- No carrier block? The quirky, integrated luggage system is one of the Brompton's best features! I'd seriously get it installed when you pick up your bike. Not only is it convenient for carrying stuff, I've found that a bit of weight on the carrier block helps smooth out the twitchiness of the front end, and dampens vibrations.
- Yes. Ergon Biokorks are great.
- Go for a cool helmet. Get the one that is the "smallest" so that it packs the most compactly when traveling. You don't need the latest aerodynamic styling.
- I use a teflon based lubricant. Works well. I'm sure NYCE can recommend something.
- Other hints? If you've got the B&W case, be sure to pad up the interior well so that the Brompton doesn't bang around and break the case when handled roughly.
Good luck!
https://www.bikeforums.net/showthread...zonation+ergon
Why do you have to wait 6 to 8 weeks? I thought NYCE Wheels had most configurations in stock?
As for your questions:
- No idea if the 2013 model comes with the Brompton tool. I'm guessing no. It might be cheaper to assemble your own tools and bundle them into a small bag.
- I think, frankly, that the included pump sucks. No polite way to put it. It's great for an emergency, but for regular inflation, get a third party pump. Because you normally want to run the tires at significantly higher pressure than larger tires, get a pump that: 1) can fold out to include a little foot rest to stabilize the feet by stepping on it; 2) a built in gauge otherwise you'll have to keep checking with a hand gauge; 3) has a comfortable foldable T-style handle - you're going to be exerting a lot of force to get a high volume of air into those small tires. I have an Axiom Enforcer hand pump.
- No carrier block? The quirky, integrated luggage system is one of the Brompton's best features! I'd seriously get it installed when you pick up your bike. Not only is it convenient for carrying stuff, I've found that a bit of weight on the carrier block helps smooth out the twitchiness of the front end, and dampens vibrations.
- Yes. Ergon Biokorks are great.
- Go for a cool helmet. Get the one that is the "smallest" so that it packs the most compactly when traveling. You don't need the latest aerodynamic styling.
- I use a teflon based lubricant. Works well. I'm sure NYCE can recommend something.
- Other hints? If you've got the B&W case, be sure to pad up the interior well so that the Brompton doesn't bang around and break the case when handled roughly.
Good luck!
#17
Senior Member
I too am not familiar with the Brompton pump. However, I have a Topeak Morph pump and rarely take it with me. I leave it at home in favor of the much smaller, nearly as efficient Park mini pump https://www.amazon.com/dp/B00188NM4Y/...SIN=B00188NM4Y
I use the Park for MTB, utility, road riding, and anywhere I go with my folding bikes. In fact, since getting the Park a couple years ago, I have not even used the Morph.
#19
Senior Member
Join Date: Nov 2007
Posts: 3,720
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 317 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
If you are not going to use the grips just use a exacto knife and cut them off. Careful so you do not scratch the handlebars. Personally I keep usable grips as I often use them on bikes I fix up and give away. I use a syringe with a needle. Just plain water inside. press the needle under or trough the grips and squees in some water. Some times i do it twice on one grip, in oposite spots. Then you just slide them off with two fingers.
#20
Senior Member
Oh yes, you need a compressor or you just take a 5 ton truck or a buldozer and ...
If you are not going to use the grips just use a exacto knife and cut them off. Careful so you do not scratch the handlebars. Personally I keep usable grips as I often use them on bikes I fix up and give away. I use a syringe with a needle. Just plain water inside. press the needle under or trough the grips and squees in some water. Some times i do it twice on one grip, in oposite spots. Then you just slide them off with two fingers.
If you are not going to use the grips just use a exacto knife and cut them off. Careful so you do not scratch the handlebars. Personally I keep usable grips as I often use them on bikes I fix up and give away. I use a syringe with a needle. Just plain water inside. press the needle under or trough the grips and squees in some water. Some times i do it twice on one grip, in oposite spots. Then you just slide them off with two fingers.
#21
Senior Member
#22
Senior Member
Join Date: Feb 2007
Location: Seville, Spain
Posts: 4,403
Bikes: Brompton M6R, mountain bikes, Circe Omnis+ tandem
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 146 Post(s)
Likes: 0
Liked 6 Times
in
5 Posts
I do a lot of touring here in Spain, and more so in Portugal, in and around Cork Oak (Quercus suber) forests, and I try to support the industry as much as possible. No wine bottled with plastic stoppers for me! Gotta get a pair of those Biocork grips!
#23
Senior Member
The Brompton pump isn't bad for a small pump with no gauge, and it fits right on the bike nicely. I have a Topeak Morph that lives on my non-folding errand-running bike and it's a nicer pump, but the Brompton one would get me home after a flat just fine.
#24
Senior Member
Join Date: Apr 2009
Location: Oklahoma, U.S.A.
Posts: 807
Bikes: Brompton H6L-X, Dahon Curve D3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 56 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
-HANK RYAN-
Norman, Oklahoma USA
#25
Senior Member