DIY Grocery Basket
#1
Junior Member
Thread Starter
DIY Grocery Basket
I couldn't justify spending 40+ dollars for a proprietary grocery basket for my luggage rack, so I made my own. The bucket is easily attached and detached in seconds.
Took me maybe 20-30 minutes to make.
Using a plastic Deli Cat or Tidy Cat bucket works good or any other kind that is similar in design.
Two 24" bungee cords
A small piece of rubber shelf liner cut to fit between the bucked and the rack. (Quiets any plastic to metal rattles and makes it non slip.)
A hacksaw blade
fine sand paper
Using just the hacksaw blade start at a corner just below the ridge where the handle attaches, and cut through using the ridge as a guide for a straight cut all the way around.
Once that is done you can use some sand paper to smooth the top edge. I used a round file to make 4 notches for the hooks on the top edge directly up from the indention's at the bottom of the bucket. The 2 indention"s on the bottom make a nice natural place for the bungee cords to pass around.
To use simply place the small rubber liner on the rack, then the bucket, hook each bungee cord to the top of the bucket and down underneath the bike rack and up the other side into the notches. This takes seconds to do.
I spray painted mine black to hide the screened on labels.
Have fun!
Took me maybe 20-30 minutes to make.
Using a plastic Deli Cat or Tidy Cat bucket works good or any other kind that is similar in design.
Two 24" bungee cords
A small piece of rubber shelf liner cut to fit between the bucked and the rack. (Quiets any plastic to metal rattles and makes it non slip.)
A hacksaw blade
fine sand paper
Using just the hacksaw blade start at a corner just below the ridge where the handle attaches, and cut through using the ridge as a guide for a straight cut all the way around.
Once that is done you can use some sand paper to smooth the top edge. I used a round file to make 4 notches for the hooks on the top edge directly up from the indention's at the bottom of the bucket. The 2 indention"s on the bottom make a nice natural place for the bungee cords to pass around.
To use simply place the small rubber liner on the rack, then the bucket, hook each bungee cord to the top of the bucket and down underneath the bike rack and up the other side into the notches. This takes seconds to do.
I spray painted mine black to hide the screened on labels.
Have fun!
#2
I'm the anecdote.
Join Date: Apr 2019
Location: S.E. Texas
Posts: 1,822
Bikes: '12 Schwinn, '13 Norco
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1110 Post(s)
Liked 1,176 Times
in
795 Posts
I couldn't justify spending 40+ dollars for a proprietary grocery basket for my luggage rack, so I made my own. The bucket is easily attached and detached in seconds.
Took me maybe 20-30 minutes to make.
Using a plastic Deli Cat or Tidy Cat bucket works good or any other kind that is similar in design.
Two 24" bungee cords
A small piece of rubber shelf liner cut to fit between the bucked and the rack. (Quiets any plastic to metal rattles and makes it non slip.)
A hacksaw blade
fine sand paper
Using just the hacksaw blade start at a corner just below the ridge where the handle attaches, and cut through using the ridge as a guide for a straight cut all the way around.
Once that is done you can use some sand paper to smooth the top edge. I used a round file to make 4 notches for the hooks on the top edge directly up from the indention's at the bottom of the bucket. The 2 indention"s on the bottom make a nice natural place for the bungee cords to pass around.
To use simply place the small rubber liner on the rack, then the bucket, hook each bungee cord to the top of the bucket and down underneath the bike rack and up the other side into the notches. This takes seconds to do.
I spray painted mine black to hide the screened on labels.
Have fun!
Took me maybe 20-30 minutes to make.
Using a plastic Deli Cat or Tidy Cat bucket works good or any other kind that is similar in design.
Two 24" bungee cords
A small piece of rubber shelf liner cut to fit between the bucked and the rack. (Quiets any plastic to metal rattles and makes it non slip.)
A hacksaw blade
fine sand paper
Using just the hacksaw blade start at a corner just below the ridge where the handle attaches, and cut through using the ridge as a guide for a straight cut all the way around.
Once that is done you can use some sand paper to smooth the top edge. I used a round file to make 4 notches for the hooks on the top edge directly up from the indention's at the bottom of the bucket. The 2 indention"s on the bottom make a nice natural place for the bungee cords to pass around.
To use simply place the small rubber liner on the rack, then the bucket, hook each bungee cord to the top of the bucket and down underneath the bike rack and up the other side into the notches. This takes seconds to do.
I spray painted mine black to hide the screened on labels.
Have fun!
#3
Junior Member
Thread Starter
I don't own a cell phone, and don't know where my camera is so I put this together with Photoshop.
This is the same exact bike as mine, along with the rack, so this is my setup except I painted my bucket black. I found out that spray paint doesn't adhere too well to plastic, and scratches easily. I suppose if the plastic were roughed up some it would take the paint better.
This is the same exact bike as mine, along with the rack, so this is my setup except I painted my bucket black. I found out that spray paint doesn't adhere too well to plastic, and scratches easily. I suppose if the plastic were roughed up some it would take the paint better.
Likes For Johnny H.:
#4
20+mph Commuter
Join Date: Jul 2007
Location: Greenville. SC USA
Posts: 7,517
Bikes: Surly LHT, Surly Lowside, a folding bike, and a beater.
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 1434 Post(s)
Liked 331 Times
in
219 Posts
I don't own a cell phone, and don't know where my camera is so I put this together with Photoshop.
This is the same exact bike as mine, along with the rack, so this is my setup except I painted my bucket black. I found out that spray paint doesn't adhere too well to plastic, and scratches easily. I suppose if the plastic were roughed up some it would take the paint better.
This is the same exact bike as mine, along with the rack, so this is my setup except I painted my bucket black. I found out that spray paint doesn't adhere too well to plastic, and scratches easily. I suppose if the plastic were roughed up some it would take the paint better.