Hex Wrench Set
#1
Habitual User
Thread Starter
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,976
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4942 Post(s)
Liked 8,081 Times
in
3,822 Posts
Hex Wrench Set
I'm looking to upgrade my mish-mash collection of L-pattern and Y-pattern wrenches. What hex wrenches do you prefer (not Park Tool)? I'm leaning towards T-handle sets from either Bondhus or Eklind. I'm also considering a T-handle bit driver with a set of hex bits.
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
#2
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,985
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6193 Post(s)
Liked 4,808 Times
in
3,316 Posts
T-handle hex drivers are nice, but many times when working as a machinist, the T-handle wrenches just wouldn't fit because they were too tall or the other side of the T was blocked by whatever was being worked on. More often than not we always grabbed the L shaped hex keys. Might not be as much conflict on a bike. But you only need two or three sizes.
As for what brands? I'd be happy with any that is a known tool brand name.
As for what brands? I'd be happy with any that is a known tool brand name.
Likes For Iride01:
#3
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,505
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4348 Post(s)
Liked 3,985 Times
in
2,661 Posts
For L wrenches, PB Swiss, Silca or Wera are all excellent options. For T handles, Beta and PB Swiss are my top choices but if I was putting on a wall in a shop I would probably go Park Tool in this instance their new T handles are quite nice actually.
Always get the best Hex wrenches you can. Bondhus and Eklind aren't bad tools but aren't as nice as some of the other stuff out there and not what I would want in my normal usage. For a travel kit that I use infrequently fine but having used and owning really top end hex stuff I wouldn't want to go back.
If you are looking for a screwdriver style Wera makes a really nice one or if you get a bit and socket set the Snap-On swivel head ratchet is awesome and well worth it. Wera also makes one of those and is probably also good but the Snap-On is truly a nice tool.
Always get the best Hex wrenches you can. Bondhus and Eklind aren't bad tools but aren't as nice as some of the other stuff out there and not what I would want in my normal usage. For a travel kit that I use infrequently fine but having used and owning really top end hex stuff I wouldn't want to go back.
If you are looking for a screwdriver style Wera makes a really nice one or if you get a bit and socket set the Snap-On swivel head ratchet is awesome and well worth it. Wera also makes one of those and is probably also good but the Snap-On is truly a nice tool.
#4
Really Old Senior Member
Buy quality.
L's don't come in a lot of different shapes, but an extra long version may be handy for 6mm and larger. Also less convenient if the extra length gets in the way.
I also have a 3/8" drive set.
I was "gifted" A "Y" type that I'll grab if I'm just going over rack/fender bolts. The easily accessible stuff.
Using the "other" end of the "L" allows one to "spin in" screws that one would use a screw driver type.
Much depends on how much you use them and where.
L's don't come in a lot of different shapes, but an extra long version may be handy for 6mm and larger. Also less convenient if the extra length gets in the way.
I also have a 3/8" drive set.
I was "gifted" A "Y" type that I'll grab if I'm just going over rack/fender bolts. The easily accessible stuff.
Using the "other" end of the "L" allows one to "spin in" screws that one would use a screw driver type.
Much depends on how much you use them and where.
#5
Habitual User
Thread Starter
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,976
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4942 Post(s)
Liked 8,081 Times
in
3,822 Posts
T-handle hex drivers are nice, but many times when working as a machinist, the T-handle wrenches just wouldn't fit because they were too tall or the other side of the T was blocked by whatever was being worked on. More often than not we always grabbed the L shaped hex keys. Might not be as much conflict on a bike. But you only need two or three sizes.
As for what brands? I'd be happy with any that is a known tool brand name.
As for what brands? I'd be happy with any that is a known tool brand name.
For L wrenches, PB Swiss, Silca or Wera are all excellent options. For T handles, Beta and PB Swiss are my top choices but if I was putting on a wall in a shop I would probably go Park Tool in this instance their new T handles are quite nice actually.
Always get the best Hex wrenches you can. Bondhus and Eklind aren't bad tools but aren't as nice as some of the other stuff out there and not what I would want in my normal usage. For a travel kit that I use infrequently fine but having used and owning really top end hex stuff I wouldn't want to go back.
If you are looking for a screwdriver style Wera makes a really nice one or if you get a bit and socket set the Snap-On swivel head ratchet is awesome and well worth it. Wera also makes one of those and is probably also good but the Snap-On is truly a nice tool.
Always get the best Hex wrenches you can. Bondhus and Eklind aren't bad tools but aren't as nice as some of the other stuff out there and not what I would want in my normal usage. For a travel kit that I use infrequently fine but having used and owning really top end hex stuff I wouldn't want to go back.
If you are looking for a screwdriver style Wera makes a really nice one or if you get a bit and socket set the Snap-On swivel head ratchet is awesome and well worth it. Wera also makes one of those and is probably also good but the Snap-On is truly a nice tool.
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
#6
Habitual User
Thread Starter
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,976
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4942 Post(s)
Liked 8,081 Times
in
3,822 Posts
Well, that ended quickly. Nashbar/Performance has the Feedback Sports T-handle set for $40. Done.
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
#7
Senior Member
Join Date: Oct 2009
Location: Sherwood, OR
Posts: 1,279
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 336 Post(s)
Liked 309 Times
in
180 Posts
Elkind - Don't recommend. Not the same quality. One mark of good quality is the chamfer at the tips. Elkind just shears the ends on every one that I have seen..
Bondhus - Least expensive of the "quality" tools. Good Value. I have the Gold Guard and the standard black oxide. I like the GG better.
Wiha - Good value for upscale tools. I have this long-arm Chrome set currently $27 https://www.kctoolco.com/wiha-66994-...ey-metric-set/
Wera - I find them excellent, some people dislike for smaller sizes. Color coding is excellent. I picked up two sets of these when they were $25 before Christmas. https://www.kctoolco.com/wera-073593...-key-clip-set/
Beta T-handle - Also expensive, but excellent. I recommend these if you want t-handle. I have found a couple to be a little bit big on the "long end", such that they don't fully seat in the fastener. If I need the "long end" to be in the fastener, I want a ball-end anyway.
PB Swiss - Money is no object and you want the best. I haven't seen these for less than $100 for the set and I am satisfied with Wiha and Wera.
Bondhus - Least expensive of the "quality" tools. Good Value. I have the Gold Guard and the standard black oxide. I like the GG better.
Wiha - Good value for upscale tools. I have this long-arm Chrome set currently $27 https://www.kctoolco.com/wiha-66994-...ey-metric-set/
Wera - I find them excellent, some people dislike for smaller sizes. Color coding is excellent. I picked up two sets of these when they were $25 before Christmas. https://www.kctoolco.com/wera-073593...-key-clip-set/
Beta T-handle - Also expensive, but excellent. I recommend these if you want t-handle. I have found a couple to be a little bit big on the "long end", such that they don't fully seat in the fastener. If I need the "long end" to be in the fastener, I want a ball-end anyway.
PB Swiss - Money is no object and you want the best. I haven't seen these for less than $100 for the set and I am satisfied with Wiha and Wera.
#8
Senior Member
Join Date: Oct 2009
Location: Sherwood, OR
Posts: 1,279
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 336 Post(s)
Liked 309 Times
in
180 Posts
I replaced them with the Beta, but that purchase is not for the faint of heart.
#9
Senior Member
#10
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,505
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4348 Post(s)
Liked 3,985 Times
in
2,661 Posts
I will always have L keys around if I need them. Definitely leaning towards T-handles. 2mm-10mm covers everything on all of my bikes. I have other options, too (1/4" drive socket set with a variety of handles and extensions.)
Thanks for the info. Part of my reason for not going with Park is budget. Some of those other brands you mention make Park look like a bargain. For a pro using tools every day, I'm sure the high-quality stuff is great. From what I can tell, Bondhus and Eklind look like they hit a sweet spot of quality and price for my needs in my home shop. $40-ish for a 2mm-10mm T-handle set is kind of what I'm looking at.
Thanks for the info. Part of my reason for not going with Park is budget. Some of those other brands you mention make Park look like a bargain. For a pro using tools every day, I'm sure the high-quality stuff is great. From what I can tell, Bondhus and Eklind look like they hit a sweet spot of quality and price for my needs in my home shop. $40-ish for a 2mm-10mm T-handle set is kind of what I'm looking at.
#11
Habitual User
Thread Starter
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,976
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4942 Post(s)
Liked 8,081 Times
in
3,822 Posts
I was looking for sliding T-handles, ideally, but I think these will be okay. I was looking at other non-sliding T configurations, as well.
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
#12
Senior Member
Join Date: Sep 2014
Posts: 3,893
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1062 Post(s)
Liked 665 Times
in
421 Posts
I do happen to like the simple Eklind folding sets, just for making it hard to misplace the smaller bits and throwing in my sag bag for a ride. But they are not a substitute for also having a good set of L wrenches.
#13
Senior Member
Join Date: Sep 2020
Location: Eastern Poland
Posts: 744
Bikes: Romet Jubilat x 4, Wigry x 1, Turing x 1
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 194 Post(s)
Liked 204 Times
in
151 Posts
Ultimately, with tools,it is what you get to do with them that is the greatest thing. I have a cheap 1/4" sliding T-bar, Snap on extensions and cheap set of hex bit sockets, and a tobacco tin of L-shaped Allen keys, which have taken me from mechanic, to R&D aeronautical engineer and to working in the back of my garage on cheap step-thru folders. Ah, we have done some amazing engineering together, and I hope for the same for you.
Likes For Geepig:
#14
Habitual User
Thread Starter
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,976
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4942 Post(s)
Liked 8,081 Times
in
3,822 Posts
Ultimately, with tools,it is what you get to do with them that is the greatest thing. I have a cheap 1/4" sliding T-bar, Snap on extensions and cheap set of hex bit sockets, and a tobacco tin of L-shaped Allen keys, which have taken me from mechanic, to R&D aeronautical engineer and to working in the back of my garage on cheap step-thru folders. Ah, we have done some amazing engineering together, and I hope for the same for you.
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
Likes For Eric F:
#15
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,985
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6193 Post(s)
Liked 4,808 Times
in
3,316 Posts
Oh, whether T-handle or L shaped hex, you might consider getting some with the speed ball end. I found those very useful for tight places where you can't get the tool directly in-line with the socket of the bolt. They aren't a replacement though. I wouldn't use a speed ball end in places where I need extremely high torque on the bolts. But they are great to get you to that point, then you can switch. But I can't think of any place on a bike that has that high a torque recommendation at the moment.
Likes For Iride01:
#16
Habitual User
Thread Starter
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,976
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4942 Post(s)
Liked 8,081 Times
in
3,822 Posts
The thing with Hex wrenches is they are not a specific tool and have many uses and are probably the most used tools out there. Getting the absolute best in those is not going to set you back a huge ton especially in terms of usage and longevity. The cheap stuff just isn't worth it pro or not.
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
#17
Habitual User
Thread Starter
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,976
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4942 Post(s)
Liked 8,081 Times
in
3,822 Posts
Oh, whether T-handle or L shaped hex, you might consider getting some with the speed ball end. I found those very useful for tight places where you can't get the tool directly in-line with the socket of the bolt. They aren't a replacement though. I wouldn't use a speed ball end in places where I need extremely high torque on the bolts. But they are great to get you to that point, then you can switch. But I can't think of any place on a bike that has that high a torque recommendation at the moment.
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
#18
Senior Member
Join Date: Jun 2020
Location: Maryland
Posts: 1,380
Bikes: 1982 Bianchi Sport SX, Rayleigh Tamland 1, Rans V-Rex recumbent, Fuji MTB, 80's Cannondale MTB with BBSHD ebike motor
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 668 Post(s)
Liked 529 Times
in
355 Posts
Love my Pittsburgh T handle hex wrenches. Been using this set for several years now.
https://www.harborfreight.com/metric...-pc-69370.html
https://www.harborfreight.com/metric...-pc-69370.html
#19
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,947
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 116 Post(s)
Tagged: 0 Thread(s)
Quoted: 1303 Post(s)
Liked 1,910 Times
in
1,140 Posts
I have switched from mostly L wrenches I am now using hex bits from Craftsman and Bluepoint. I get much better traction from a ratchet and extension when needed. And they take up less space in the tool box. Smiles, MH
#20
Not lost wanderer.
Join Date: Jan 2013
Location: Lititz, Pa
Posts: 3,325
Bikes: In USA; 73 Raleigh Super Course dingle speed, 72 Raleigh Gran Sport SS, 72 Geoffry Butler, 81 Centurion Pro-Tour, 74 Gugie Grandier Sportier
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 885 Post(s)
Liked 989 Times
in
521 Posts
I buy L handle Allen wrenches by the handful here in Cambodia, the end gets a bit round, it gets cut off and beveled a bit. I have full sized L wrenches that I cut to fit every tool on each of my bikes. A decent strong set can be had here for $8, individual wrench is .50 cents to $1
#21
Senior Member
Join Date: Dec 2010
Location: St Cloud Fl.
Posts: 1,945
Bikes: Only my riders left...
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 350 Post(s)
Liked 782 Times
in
389 Posts
Buy the Park Tool set already! Great tools! Easy to find Park Tool blue! Great holder! A great way to start your “Bicycle Tool” tool set...your specific, go to bicycle tools only...
#22
Senior Member
Join Date: Mar 2015
Location: Martinsburg WV Area
Posts: 1,704
Bikes: State 4130 Custom, Giant Trance 29
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 422 Post(s)
Liked 182 Times
in
123 Posts
I had bought this Bondhus set last month. This is a solid tool set and wasn't expecting it to be so well built for only $30 and free shipping via Amazon Prime. I had read somewhere that Bondhus is who made the Park tools, which to me makes this even a better deal.
Bondhus Tool, click here
Bondhus Tool, click here
Likes For travbikeman:
#23
Habitual User
Thread Starter
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,976
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4942 Post(s)
Liked 8,081 Times
in
3,822 Posts
I decided on the Feedback Sports T-handle set, primarily because I found it for $40 (usually $120-130). The Bondhus set would have been my alternate pick. I'm not starting my bicycle tool set, just upgrading one small portion of my toolbox.
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
#24
Habitual User
Thread Starter
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,976
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4942 Post(s)
Liked 8,081 Times
in
3,822 Posts
I had bought this Bondhus set last month. This is a solid tool set and wasn't expecting it to be so well built for only $30 and free shipping via Amazon Prime. I had read somewhere that Bondhus is who made the Park tools, which to me makes this even a better deal.
Bondhus Tool, click here
Bondhus Tool, click here
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
#25
Senior Member
Join Date: Mar 2015
Location: Martinsburg WV Area
Posts: 1,704
Bikes: State 4130 Custom, Giant Trance 29
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 422 Post(s)
Liked 182 Times
in
123 Posts
Just checked and found that Bike Radar does confirm that Bondhus makes tools for Park Tools and other companies like Snap On.
Bike Radar Article, click here
BUT, this article was from 2017. So can't guarantee that this has changed.
Likes For travbikeman: