min rim surface for brake pad -
#1
Senior Member
Thread Starter
min rim surface for brake pad -
hi,
does this look wrong? it seems the rim is very narrow profile. looks like the pad doesnt have enough rim surface. like not all of the pad is contacting the rim surface.
the rim is vintage-sized 26x1-3/8.
thamks!
does this look wrong? it seems the rim is very narrow profile. looks like the pad doesnt have enough rim surface. like not all of the pad is contacting the rim surface.
the rim is vintage-sized 26x1-3/8.
thamks!
Last edited by mtb_addict; 08-15-20 at 07:43 AM.
#2
Senior Member
Join Date: Feb 2012
Location: Williamsburg, VA Sebastian, FL
Posts: 1,363
Bikes: 1987 Centurion Ironman Master, 1992 Koga Miyata Exerciser, 1992 Schwinn Crosscut
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 209 Post(s)
Likes: 0
Liked 175 Times
in
92 Posts
The pad appears wider from the outside looking in.
With careful adjustment, the contact surface of the pad should be fine for the rim.
Nice-looking bike, by the way, very clean.
You might want to trim off the excess brake cable, once you're happy with the adjustment.
With careful adjustment, the contact surface of the pad should be fine for the rim.
Nice-looking bike, by the way, very clean.
You might want to trim off the excess brake cable, once you're happy with the adjustment.