FS Campy Ergo 8 spd shifter project with new hoods
09-11-20, 02:43 PM
#1
Senior Member
Thread Starter
Join Date: May 2011
Location: Seattle WA
Posts: 2,841
Bikes: 2009 Handsome Devil, 1987 Trek 520 Cirrus, 1978 Motobecane Grand Touring, 1987 Nishiki Cresta GT, 1989 Specialized Allez Former bikes; 1986 Miyata Trail Runner, 1979 Miyata 912, 2011 VO Rando, 1999 Cannondale R800, 1986 Schwinn Passage
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 796 Post(s)
Liked 522 Times
in
367 Posts
FS Campy Ergo 8 spd shifter project with new hoods
These shifters came off a bike I was hoping to get up an running and sell. It had a campy 8 speed cassette on the rear wheel so I assume they are 8 speed ergos. I can find no model name or other markings. The front shifter worked on the double chainring on the bike, the rear shifter would downshift (thumb shifter) fine but would upshift (finger shifter) reluctantly and only go into 5 of the 8 cogs. Not sure if cables or RD could have been a factor I am no campy expert. My LBS said they are rebuildable and they normally charge about $70 for such a job. If you have the knowledge or need parts these could be for you. The hoods are new campy replacements pre 98 Ergo hoods (EC- RE500)
that cost me $30 from the UK - before shipping. Price including shipping in the CONUS $65
new hood top old shot hood bottom
that cost me $30 from the UK - before shipping. Price including shipping in the CONUS $65
new hood top old shot hood bottom
Likes For ryansu:
09-14-20, 03:16 PM
#2
Senior Member
Thread Starter
Join Date: May 2011
Location: Seattle WA
Posts: 2,841
Bikes: 2009 Handsome Devil, 1987 Trek 520 Cirrus, 1978 Motobecane Grand Touring, 1987 Nishiki Cresta GT, 1989 Specialized Allez Former bikes; 1986 Miyata Trail Runner, 1979 Miyata 912, 2011 VO Rando, 1999 Cannondale R800, 1986 Schwinn Passage
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 796 Post(s)
Liked 522 Times
in
367 Posts
Sold
