Motobecane Jubilee Sport
#1
Member
Thread Starter
Join Date: Apr 2014
Location: Pella, Iowa
Posts: 42
Bikes: 1966 Western Flyer Cosmic Flyer, 1975 Raleigh Record, BSA 10 Speed
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Liked 0 Times
in
0 Posts
Motobecane Jubilee Sport
Sorry if this is the wrong place for this. Please move it if necessary. I was looking at a Motobecane Jubilee Sport (didn't take any pictures). It was at a Bike Collective and they are firm at $150. It is medium blue with a darker blue headtube. It is a 23" frame and fits me. It has downtube shifters. It looks like all it needs is a good cleaning and to put some miles on it. Might not even need tires. I'm mainly here looking for people's opinions on this brand and model. I know nothing about them. I'm going to be doing a 71 mile trail ride this June and looking for a lighter bike with more hears than my old heavy three speeds. Thanks for your impute and time.
#2
Zip tie Karen
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,004
Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times
in
806 Posts
The one I had (1984?) was beige with the blue head tube, blue saddle and cabling. It had the internally brazed lugs (inexternal?) and was nicely finished, with top tube internally routed rear brake cable. Full chrome fork. SunTour ARx derailleurs with the central command shifters. Weinman side pulls, if I recall correctly. The handlebar wrap was the molded rubber (sort of a faux leather with faux stitching) with fully integrated brake hoods.
Overall, the bike had a pretty lively ride, and was just one size to large for me to keep. Good bike. If they have serviced it at all, and it fits you, then it is well worth the $150.
Overall, the bike had a pretty lively ride, and was just one size to large for me to keep. Good bike. If they have serviced it at all, and it fits you, then it is well worth the $150.
#3
Member
Thread Starter
Join Date: Apr 2014
Location: Pella, Iowa
Posts: 42
Bikes: 1966 Western Flyer Cosmic Flyer, 1975 Raleigh Record, BSA 10 Speed
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Liked 0 Times
in
0 Posts
I bet that is about the same year. It had the blue faux leather wrap and fully chromed fork. I'm just wanting to make sure I'm not buying junk if I get it because I am not familiar with the name. Would it be comfortable on a long ride?
#4
Senior Member
Join Date: May 2013
Location: Greenwood SC USA
Posts: 2,252
Bikes: 2002 Mercian Vincitore, 1982 Mercian Colorado, 1976 Puch Royal X, 1973 Raleigh Competition, 1971 Gitane Tour de France and others
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 823 Post(s)
Liked 1,395 Times
in
694 Posts
Here is a catalog to peruse. These were lovely bikes, built towards the end of the line for Motobecane in France. All variants of the Jubilee were quality bikes built with nice tubing. $150 is a steal for this one, and I suspect you will find it rides beautifully on paved surfaces. In the '83 catalog they describe it as suited for recreation, touring or sport. The '84 catalog talks about serious riders and triathletes - but this was back when triathlon bikes were essentially racing machines designed to be comfortable for long days in the saddle.
#5
Bad example
Join Date: Nov 2015
Location: Seattle and Reims
Posts: 3,067
Bikes: Peugeot: AO-8 1973, PA-10 1971, PR-10 1973, Sante 1988; Masi Gran Criterium 1975, Stevenson Tourer 1980, Stevenson Criterium 1981, Schwinn Paramount 1972, Rodriguez 2006, Gitane Federal ~1975, Holdsworth Pro, Follis 172 ~1973, Bianchi '62
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 825 Post(s)
Liked 209 Times
in
96 Posts
Bikeboy, the French manufacturers knew how to make bikes that had a nice ride. I have had several low end French bikes including a Motobécane Nomade and Mirage, and a Moto-made Astra. With aluminum rims they all had a pleasant ride. The Jubile Sport is a higher-Range bike and should be very nice for longer rides.
__________________
Keeping Seattle’s bike shops in business since 1978
Keeping Seattle’s bike shops in business since 1978
#6
Zip tie Karen
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,004
Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times
in
806 Posts
It's certainly not junk. And there is no reason why this bike can't be comfortable. It has a sport geometry.
What has the seller said about condition? Have the bearings been serviced? Those are things that you'll need to look at. Is there wear on the chainrings? Has the chain been replaced?
What about tires? These were spec'd with 27 x 1" tires. Have they been replaced, or do you have 35 year old tires on there? If original, the seller should discount because of that. A 27 1 1/8" Panaracer Pasela would be a more comfortable upgrade.
I'd have no reservations about taking this bike on long rides, personally. It has to fit you. 23" frame? How tall are you?
What has the seller said about condition? Have the bearings been serviced? Those are things that you'll need to look at. Is there wear on the chainrings? Has the chain been replaced?
What about tires? These were spec'd with 27 x 1" tires. Have they been replaced, or do you have 35 year old tires on there? If original, the seller should discount because of that. A 27 1 1/8" Panaracer Pasela would be a more comfortable upgrade.
I'd have no reservations about taking this bike on long rides, personally. It has to fit you. 23" frame? How tall are you?
#7
Member
Thread Starter
Join Date: Apr 2014
Location: Pella, Iowa
Posts: 42
Bikes: 1966 Western Flyer Cosmic Flyer, 1975 Raleigh Record, BSA 10 Speed
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Liked 0 Times
in
0 Posts
It's certainly not junk. And there is no reason why this bike can't be comfortable. It has a sport geometry.
What has the seller said about condition? Have the bearings been serviced? Those are things that you'll need to look at. Is there wear on the chainrings? Has the chain been replaced?
What about tires? These were spec'd with 27 x 1" tires. Have they been replaced, or do you have 35 year old tires on there? If original, the seller should discount because of that. A 27 1 1/8" Panaracer Pasela would be a more comfortable upgrade.
I'd have no reservations about taking this bike on long rides, personally. It has to fit you. 23" frame? How tall are you?
What has the seller said about condition? Have the bearings been serviced? Those are things that you'll need to look at. Is there wear on the chainrings? Has the chain been replaced?
What about tires? These were spec'd with 27 x 1" tires. Have they been replaced, or do you have 35 year old tires on there? If original, the seller should discount because of that. A 27 1 1/8" Panaracer Pasela would be a more comfortable upgrade.
I'd have no reservations about taking this bike on long rides, personally. It has to fit you. 23" frame? How tall are you?
#8
Bad example
Join Date: Nov 2015
Location: Seattle and Reims
Posts: 3,067
Bikes: Peugeot: AO-8 1973, PA-10 1971, PR-10 1973, Sante 1988; Masi Gran Criterium 1975, Stevenson Tourer 1980, Stevenson Criterium 1981, Schwinn Paramount 1972, Rodriguez 2006, Gitane Federal ~1975, Holdsworth Pro, Follis 172 ~1973, Bianchi '62
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 825 Post(s)
Liked 209 Times
in
96 Posts
I'll have to check on all those things. The tires look nearly new. I'm right at 6' tall. The bike is a 23". Oddly enough I have felt more comfortable on a friend's Motobecane that is shorter. I can't figure it out.....I need a 23" frame so I can have my legs extended properly, but then it feels like I'm putting too much weight on my hands. On a shorter frame I feel like my legs are bunched up and it's a struggle to pedal, but it just feels like the upper half of the bike fits me like a glove. Frustrating.
__________________
Keeping Seattle’s bike shops in business since 1978
Keeping Seattle’s bike shops in business since 1978
#9
Member
Thread Starter
Join Date: Apr 2014
Location: Pella, Iowa
Posts: 42
Bikes: 1966 Western Flyer Cosmic Flyer, 1975 Raleigh Record, BSA 10 Speed
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Liked 0 Times
in
0 Posts
Nice bike! I assume shortening the stem is bringing the handlebars closer to me? That would work somewhat like moving the saddle forward?
#10
Zip tie Karen
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,004
Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times
in
806 Posts
You set the saddle position first, to get your knees and upper leg in the right relationship to the crank and pedal. Traditionally, saddle position (fore and aft) is not adjusted to fit the length of the top tube + stem. It's the other way around. Set the saddle for efficient pedaling (for you), and then adjust the stem to move the handlebars where you need them on a particular frame.
If you're 6' and of normal proportions, then 23" is a good starting point for you. If you feel like you're falling forward onto your hands, maybe your saddle is too far forward, beyond the balance point for your legs and the crankset. You should feel balanced when riding, neither too far behind the cranks nor falling forward of them, when riding under load.
If you're 6' and of normal proportions, then 23" is a good starting point for you. If you feel like you're falling forward onto your hands, maybe your saddle is too far forward, beyond the balance point for your legs and the crankset. You should feel balanced when riding, neither too far behind the cranks nor falling forward of them, when riding under load.
#11
Bad example
Join Date: Nov 2015
Location: Seattle and Reims
Posts: 3,067
Bikes: Peugeot: AO-8 1973, PA-10 1971, PR-10 1973, Sante 1988; Masi Gran Criterium 1975, Stevenson Tourer 1980, Stevenson Criterium 1981, Schwinn Paramount 1972, Rodriguez 2006, Gitane Federal ~1975, Holdsworth Pro, Follis 172 ~1973, Bianchi '62
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 825 Post(s)
Liked 209 Times
in
96 Posts
__________________
Keeping Seattle’s bike shops in business since 1978
Keeping Seattle’s bike shops in business since 1978
#12
Senior Member
Join Date: Nov 2008
Location: New York Metro Area
Posts: 3,863
Bikes: '02 Litespeed, '99 Bianchi Alfana. '91 Fuji Saratoga, '84 Peugeot Canyon Express, '82 Moto GR, '81 Fuji America, '81 Fuji Royale; '78 Bridgestone Diamond Touring, '76 Fuji America, plus many more!
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 181 Post(s)
Liked 224 Times
in
127 Posts
Motobecane really knew how to make bikes! The French Motobecanes are great riding bikes, and were a very good value. The paint jobs on some their bikes were truly top-notch! Tres magnifique!
Thread
Thread Starter
Forum
Replies
Last Post
Kevindale
Classic and Vintage Bicycles: Whats it Worth? Appraisals.
11
07-19-16 07:39 AM
frantik
Classic & Vintage
25
03-24-11 07:59 PM