Trailer hitch bike racks
#1
Fred
Thread Starter
Join Date: May 2009
Location: Woodstock, GA
Posts: 220
Bikes: Specialized Tarmac Comp, Trek 4100, Specialized Allez Elite, Kickr Snap
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 24 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Trailer hitch bike racks
Hi everyone! I'm getting ready to add a hitch to the back of my car specifically for a bike rack. Now I need to get the rack.
Any suggestions for a trailer hitch bike rack suitable for a road bike, max capacity 2? Preferably one that doesn't cost 300 bucks?
Any suggestions for a trailer hitch bike rack suitable for a road bike, max capacity 2? Preferably one that doesn't cost 300 bucks?
#3
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,988
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6193 Post(s)
Liked 4,810 Times
in
3,318 Posts
What kind of car? My son got a bike rack to use with his 2005 Jeep Liberty. Even with one of the receiver adapters to extend the rack back far enough to miss the spare tire mounted on the rear, and as well offset it to raise it higher, he still had to be careful about dragging the bike tires when transitioning from slopes to flats or vice versa. He now uses one that mounts to the spare tire mount, still allowing use of the spare tire, and holds the bikes much higher so dragging isn't an issue. As well, it's much steadier than the one mounted in the trailer hitch receiver.
If you are limited to using a rack that has to use your trailer hitch receiver, then maybe those that have a wheel rest under them as part of their scheme will provide more protection. His first rack, they simply hung from hooks through the tops of the wheels. Secure enough. Just no protection from user mistakes of going from flat to steep and forgetting the bikes.
If you are limited to using a rack that has to use your trailer hitch receiver, then maybe those that have a wheel rest under them as part of their scheme will provide more protection. His first rack, they simply hung from hooks through the tops of the wheels. Secure enough. Just no protection from user mistakes of going from flat to steep and forgetting the bikes.
#4
Senior Member
Join Date: Jan 2007
Location: Eastern VA
Posts: 1,724
Bikes: 2022 Fuel EX 8, 2021 Domane SL6, Black Beta (Nashbar frame), 2004 Trek 1000C for the trainer
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 270 Post(s)
Liked 447 Times
in
266 Posts
Rack
i have an Allen rack. Don’t remember the model but works well but not height adjustable. It may be the 532 and holds three bikes. The 522 is a two bike. They do have one that is. It is the deluxe version. I saw the three bike version for $99. These are top tube support type. If you go this way get the anti rock bolt thing.
her new version. Oh I was told not to use this type with a carbon frame bike. I use with aluminum frame bike.
https://www.amazon.com/gp/aw/d/B078Y...626&&sr=8-4
her new version. Oh I was told not to use this type with a carbon frame bike. I use with aluminum frame bike.
https://www.amazon.com/gp/aw/d/B078Y...626&&sr=8-4
#5
Senior Member
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,549
Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0
Mentioned: 112 Post(s)
Tagged: 0 Thread(s)
Quoted: 5224 Post(s)
Liked 3,581 Times
in
2,342 Posts
lots of ppl like the tray style (a little more expensive maybe but several features & benefits worth considering). I'm still old school hanging bikes by their top tube, got a used one on CL for 2 bikes & a new one I forget where for 4 bikes. keep an eye on whether you get a 2" or 1 1/14" receiver
https://atlanta.craigslist.org/atl/b...587107454.html
https://atlanta.craigslist.org/nat/b...582186242.html
if you have any wiggle, either at the hitch rack elbow or at the hitch itself there are a cpl ways to stop it / minimize it such as screw-in style hitch pins & safety straps. some racks come with screw in pins, many do not. I added one to one rack, the other was all set. one needs straps (4 bikes) the other (2 bikes) does not. but they both use screw in pins
this old "Subaru" rack fits any 1 1/4" hitch. works great for 1 bike & OK for 2. it would better for 2 bikes with straight top tubes. Wifey's bike has a steep sloped top tube so I have to use the other rack if we go anywhere together
this shows how safety straps are used on my Swagman Titan
https://atlanta.craigslist.org/atl/b...587107454.html
https://atlanta.craigslist.org/nat/b...582186242.html
if you have any wiggle, either at the hitch rack elbow or at the hitch itself there are a cpl ways to stop it / minimize it such as screw-in style hitch pins & safety straps. some racks come with screw in pins, many do not. I added one to one rack, the other was all set. one needs straps (4 bikes) the other (2 bikes) does not. but they both use screw in pins
this old "Subaru" rack fits any 1 1/4" hitch. works great for 1 bike & OK for 2. it would better for 2 bikes with straight top tubes. Wifey's bike has a steep sloped top tube so I have to use the other rack if we go anywhere together
this shows how safety straps are used on my Swagman Titan
Last edited by rumrunn6; 05-18-18 at 12:54 PM.
#6
Senior Member
Join Date: Feb 2017
Location: Hollister, CA (not the surf town)
Posts: 1,737
Bikes: 2019 Specialized Roubaix Comp Di2, 2009 Roubaix, early 90's Giant Iguana
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 643 Post(s)
Liked 1,526 Times
in
551 Posts
Nashbar had their deluxe 2 bike rack on sale for $169.00 a few weeks ago so I ordered one. Just came this week and haven't opened the box yet. I know lots of people don't like anything touching the top tube but I figured I'd cut a piece of pipe insulation to slip over it.
https://www.bikenashbar.com/cycling/...bn-shdlx2-base
https://www.bikenashbar.com/cycling/...bn-shdlx2-base
#7
Fred
Thread Starter
Join Date: May 2009
Location: Woodstock, GA
Posts: 220
Bikes: Specialized Tarmac Comp, Trek 4100, Specialized Allez Elite, Kickr Snap
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 24 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Some great information here so far. Thanks everyone! To answer @Iride01, the car is (don't laugh) a Miata. I've tried putting a trunk mount rack on it and it ends up ruining the paint. I found a nice hitch designed specifically for the Miata that hides when you aren't using it. Obviously I'm never going to haul a trailer behind the car, but this seemed like the best way to put a bike rack on the back. It will be rather low to the ground, so I will have to be careful with steep hills. I was thinking that I wanted a tray-based one rather than hanging, specifically so that if anything scraped bottom it would be the rack and not the bike's wheels. Unfortunately those get pricey. I like the Nashbar rack, and it is still at a good price. I may also take a peek at Craig's list.
#8
Senior Member
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,549
Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0
Mentioned: 112 Post(s)
Tagged: 0 Thread(s)
Quoted: 5224 Post(s)
Liked 3,581 Times
in
2,342 Posts
#9
Senior Guest
Join Date: Jan 2008
Location: Upstate NY, USA
Posts: 375
Bikes: Jamis Endura, Cannondale CAAD, Raleigh Cross, Fausto Coppi.
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 81 Post(s)
Liked 47 Times
in
31 Posts
#10
Senior Member
Join Date: Dec 2012
Location: North Central Florida
Posts: 821
Bikes: 2022 LiteSpeed CHEROHALA CITY, 2019 Canyon Roadlite 9.0 CF LTD, 2015 Giant FastRoad CoMax 1, 2001 Mongoose Pro Triomphe,
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 129 Post(s)
Likes: 0
Liked 84 Times
in
50 Posts
Some great information here so far. Thanks everyone! To answer @Iride01, the car is (don't laugh) a Miata. I've tried putting a trunk mount rack on it and it ends up ruining the paint. I found a nice hitch designed specifically for the Miata that hides when you aren't using it. Obviously I'm never going to haul a trailer behind the car, but this seemed like the best way to put a bike rack on the back. It will be rather low to the ground, so I will have to be careful with steep hills. I was thinking that I wanted a tray-based one rather than hanging, specifically so that if anything scraped bottom it would be the rack and not the bike's wheels. Unfortunately those get pricey. I like the Nashbar rack, and it is still at a good price. I may also take a peek at Craig's list.
I had a couple of different hitch racks in my Miata days (90 blue & 95 M-edition). Now I have only one make. Kuat. NOTHING touches the bike frame just the wheels. I have a couple of the Kuat NV's 1.25 racks for my Smart Fortwo and my Audi TT roadster and a 4 place NV 2" hitch rack for my motorhome (so I can take both our road and mtn bikes on trips. They are great racks and the company support is like no other. I have had all the rest over the past 40 years or so even had a custom hitch for my Jags back in the day but nothing comes close to a Kuat... good luck and enjoy top down fun to the trail head and back.
#11
Senior Member
I’ve used this on my NC Miata for 2 years now, holds 2 bikes, hitch tray style, well built and inexpensive! Sportrack crest 2 SportRack US.
#12
Senior Member
Join Date: Jul 2015
Location: Chicago Suburbs
Posts: 1,406
Bikes: GT Transeo & a half dozen ebike conversions.
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 340 Post(s)
Liked 275 Times
in
192 Posts
I mounted a 1-1/4" hitch on my '94 miata. Used it with a inexpensive Bell hanging rack. Very sturdy for one bike.
We used to have a Jeep Grand Cherokee and later a Honda Pilot. I put a 2" hitch on the Jeep and U-Haul put one on the Honda. We used a 4-bike hanger rack. It must have weighed 50 pounds by itself. What I didn't like was mounting the accessory arm on my wife/daughters two bikes w/o top tubes. I figured the seat post would come loose and drop the bikes, so I would strap the frames to the rack too.
Now I use a swagman platform carrier on a 1-1/4" hitch on a Jetta. Not a good bike hauler. When packed with luggage and two bikes, the bottom of the hitch scrapes asphalt going into gas stations and up steeper hills.
We used to have a Jeep Grand Cherokee and later a Honda Pilot. I put a 2" hitch on the Jeep and U-Haul put one on the Honda. We used a 4-bike hanger rack. It must have weighed 50 pounds by itself. What I didn't like was mounting the accessory arm on my wife/daughters two bikes w/o top tubes. I figured the seat post would come loose and drop the bikes, so I would strap the frames to the rack too.
Now I use a swagman platform carrier on a 1-1/4" hitch on a Jetta. Not a good bike hauler. When packed with luggage and two bikes, the bottom of the hitch scrapes asphalt going into gas stations and up steeper hills.
#14
Member
I’ve used this on my NC Miata for 2 years now, holds 2 bikes, hitch tray style, well built and inexpensive! Sportrack crest 2 SportRack US.
#15
Member
You didn't tell us what kind of bike you're transporting. Not sure if it's true but I've heard that carbon bikes should not be mounted on racks that support the top tube. I'm sure that someone will add a yes or nay to this.
#16
Life Feeds On Life
Join Date: Jan 2018
Location: Hondo,Texas
Posts: 2,143
Bikes: Too many Motobecanes
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 4423 Post(s)
Liked 4,527 Times
in
3,029 Posts
Just an FYI...The Sportrack, Hollywood tray rack and the Performance tray rack (I used one for years) are pretty much the same. The only problem with tray racks are that if a car bumps it in a parking lot, you may need to bang it back into alignment. I kept a hammer in my trunk.
That rack is identical to my Nashbar Shawdow 2 and it works good for a budget receiver hitch rack. It holds the bikes well and I add some bungee cords for additional security. I recently ordered extra tire mounts for my fatbike that fortunately Nashbar sells. Overall I’m happy with it at the price point it sells at.
#17
Road Runner
I just got a Saris SuperClamp EX for my new car, replacing an old Thule tray rack that was much bulkier and heavier to manage (the Saris is only 35 lbs). It's higher than the price range mentioned, but they have them on sale right now for about $380. Very well designed and will hold two bikes up to 60 lbs each (not a concern for me until my wife recently started talking about an eBike!).
#18
Full Member
I use this one:
2-Bike Hitch Rack | Prorack
I paid 69 dollars three years ago, now 109 dollars. Not clear how to order this from the website other than calling. Amazon has it but it looks a little shady:
https://www.amazon.com/Prorack-80624.../dp/B00BQUK2QK
2-Bike Hitch Rack | Prorack
I paid 69 dollars three years ago, now 109 dollars. Not clear how to order this from the website other than calling. Amazon has it but it looks a little shady:
https://www.amazon.com/Prorack-80624.../dp/B00BQUK2QK
#19
Senior Member
I bought a Hollywood rack a few years ago off of Amazon. It was under $200 if I recall and has taken a lot of neglect and held up well. Would recommend. Looks just like the sports rack above.
__________________
Momento mori, amor fati.
Momento mori, amor fati.
#20
Senior Member
Join Date: Jul 2010
Posts: 5,791
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 1020 Post(s)
Liked 463 Times
in
293 Posts
The Thule is not inexpensive. You, however, get what you pay for.
In a recent rear-end collision my Thule hitch-mount rack sacrificed its “life” in order to spare greater damage to my C60 and to my car.
Regardless of which rack you end up getting, I recommend the 2” receiver. It is sturdier and has less tendency to vibrate.
Good luck and ride safely.
#21
Senior Member
I found a Reese 4 bike rack in the Wal Mart clearance aisle for $40. Wouldn't hesitate to take it on a long trip, it's pretty solid.
#22
Senior Member
Join Date: Dec 2017
Location: Maine
Posts: 55
Bikes: Fuji Allegro, Miele Mountain Bike, Trek Domane AL 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 18 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
" I figured I'd cut a piece of pipe insulation to slip over it."
Pipe insulation works like sandpaper.
Pipe insulation works like sandpaper.
#23
Senior Member
I have an older Sportrider from Performance Bicycle, made for them by Hollywood. I put a ratcheting vertical pole on it because the hooks that just squeezed the square tube would slowly slip upward off the top tube as I drove over rough roads. I see that the one from Performance and Nashbar both have the ratcheting vertical pole on them. The Performance model is $149. It doesn't fold toward the car like the Nashbar rack, but it angles upward after it leaves the receiver. If I was looking for one today for a regular bike I'd get the Performance rack. With the 2" to 1 1/4" adapter from U-Haul my rack clears the spare tire on my Wrangler.
#24
Senior Member
Here's the one I use:
(Picture taken from that link).
Holds two bikes by the wheels and frame. Doesn't care what kind of frame you have, it will hold it straight. By holding the wheels, there is zero chance of them rubbing against your car. Some folds so they can be left on the car when not in used. Some also has a lock on that sliding curved bar on top to prevent opportunistic theft.
(Picture taken from that link).
Holds two bikes by the wheels and frame. Doesn't care what kind of frame you have, it will hold it straight. By holding the wheels, there is zero chance of them rubbing against your car. Some folds so they can be left on the car when not in used. Some also has a lock on that sliding curved bar on top to prevent opportunistic theft.
#25
Senior Member
- - -
Bike weight 17 pounds, or somewhere around that. Supported at two contact points on the top tube. I would think the forces and stresses of a 215 pound rider on a frame is much, much more than a 17 pound suspended weight.
Last edited by volosong; 06-05-18 at 09:02 PM.