Titanium fixie fork, what are the pros and cons
#1
Newbie
Thread Starter
Join Date: Mar 2018
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Titanium fork on fixed gear, what are the pros and cons
I'mHey im trying to build my very first titanium bike and i am just curious if it is okay if i try using titanium fork
Last edited by Nickescasio; 03-22-18 at 11:25 AM. Reason: Grammar
#2
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,902
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4802 Post(s)
Liked 3,922 Times
in
2,551 Posts
Titanium forks are not common. One thing I would be very careful about is that you know these forks were welded up by someone really good at welding titanium. A fork is a place where you really don't want to have a failure. (Trust me - I know first hand.)
The characteristics of titanium, if done right, should make a sweet fork. I haven't ridden one but have thought about it for years. The framebuilder who has done a lot of work for me has made a few. He and others have made ti forks as triangular trusses with tubes coming from the hub to the front of the stem. You lose stem adjustibilty, but what a light fork! You want a fork that is larger diameter than a steel fork if you stay conventional to get enough stiffness since the titanium is half as stiff as a material.
Ben
The characteristics of titanium, if done right, should make a sweet fork. I haven't ridden one but have thought about it for years. The framebuilder who has done a lot of work for me has made a few. He and others have made ti forks as triangular trusses with tubes coming from the hub to the front of the stem. You lose stem adjustibilty, but what a light fork! You want a fork that is larger diameter than a steel fork if you stay conventional to get enough stiffness since the titanium is half as stiff as a material.
Ben
#3
Banned
Anything but building it out of straight Ti tubing , IE tapered blade, will get Really Expensive ... You done well in the Stock Market?