SRAM invents rotating 3 FD system
#26
Senior Member
Join Date: Apr 2010
Location: Mountain View, CA USA and Golden, CO USA
Posts: 6,341
Bikes: 97 Litespeed, 50-39-30x13-26 10 cogs, Campagnolo Ultrashift, retroreflective rims on SON28/PowerTap hubs
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 550 Post(s)
Liked 325 Times
in
226 Posts
#27
On Your Left
Join Date: Nov 2011
Location: Long Island, New York, USA
Posts: 8,373
Bikes: Trek Emonda SLR, Sram eTap, Zipp 303
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 3004 Post(s)
Liked 2,433 Times
in
1,187 Posts
I have 2 bikes, one with a compact crank and 11-28 and the other with a 40T and 11-32. Living on Long Island, there's VERY few places the x1 will be difficulyh to get to.
#28
Senior Member
I would consider this to almost be a "offensive" patent. Probably meant to be a roadblock to the other big manufacturers from developing something similar. I'm sure if SRAM could they would try to invent a 12-speed internal hub but Shimano patents probably prevent this.
#29
Beer & Bikes
Join Date: May 2008
Location: USA
Posts: 106
Bikes: '20 Specialized Roubaix Expert, '20 Specialized Shiv Elite, '13 Specialized S-Works Epic
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 38 Post(s)
Liked 80 Times
in
36 Posts
As far as the SRAM thing... nah...
#30
serious cyclist
Join Date: Apr 2009
Location: Austin
Posts: 21,147
Bikes: S1, R2, P2
Mentioned: 115 Post(s)
Tagged: 1 Thread(s)
Quoted: 9334 Post(s)
Liked 3,679 Times
in
2,026 Posts
I would consider this to almost be a "offensive" patent. Probably meant to be a roadblock to the other big manufacturers from developing something similar. I'm sure if SRAM could they would try to invent a 12-speed internal hub but Shimano patents probably prevent this.
Likes For Bah Humbug:
#31
Senior Member
Join Date: Oct 2010
Posts: 8,515
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 3241 Post(s)
Liked 2,512 Times
in
1,510 Posts
I don't know. It's data point of one but I've some experience with and without triples. This spring I went from a 2007 Ultegra Triple to a 2020 Ultegra Di2. I was concerned I'd miss that low range on some climbs. But the 38 to 38 front to rear of the 2020 has me all good without the triple. Again, my experience is but one however, I am pleased with the switch.
As far as the SRAM thing... nah...
As far as the SRAM thing... nah...
#32
For The Fun of It
Join Date: May 2007
Location: Louisissippi Coast
Posts: 5,851
Bikes: Lynskey GR300, Lynskey Backroad, Litespeed T6, Lynskey MT29, Burley Duet
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 2135 Post(s)
Liked 1,644 Times
in
826 Posts
If it adds expense and complexity, I guess we should look for it to become the new standard.
#34
Full Member
This is old news but Shimano has been developing a gearbox, according to one of their latest patents, the patent Sram had on wireless controls, will be redundant if the gearbox gets mainstream traction.
As far as range goes, a gearbox will beat any derailleur range available.
As far as range goes, a gearbox will beat any derailleur range available.
Likes For noodle soup:
#37
Full Member
How does your flashlight or your electric car operate with dead batteries? Remember to charge them you say? OK, then an electric shifting works a lot better and that is why it grew from nothing to pretty much own the upper end of the business. This is the same with hydraulic disk brakes - you don't wear expensive light wheels out. Disks and new brake pads are cheap. While they aren't as large an improvement as electronic shifting, they are a definite improvement.
While I'm a little put off by SRAM with their multiple batteries vs. Di2 with a single battery, that is somewhat offset by the fact that you don't have to wire the SRAM - just bolt them on and they run. However, you only have to wire Di2 once per bike. You only have to charge the Di2 once every several weeks even under hard use.
While I'm a little put off by SRAM with their multiple batteries vs. Di2 with a single battery, that is somewhat offset by the fact that you don't have to wire the SRAM - just bolt them on and they run. However, you only have to wire Di2 once per bike. You only have to charge the Di2 once every several weeks even under hard use.