Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Tube size, 700c 28, 32 , 35

Search
Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Tube size, 700c 28, 32 , 35

Thread Tools
 
Search this Thread
 
Old 09-09-19, 11:49 AM
  #1  
mcm44
Junior Member
Thread Starter
 
Join Date: Jul 2018
Posts: 18
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 3 Times in 1 Post
Tube size, 700c 28, 32 , 35

Hi everyone
My wife's bike is 700c wheels and 28mm tires. I want to get a pair of 32mm or 35mm tires for her to swap for those 2 or 3 times a year we may want to ride in gravel trail paths.

My question: is the tube size the same? If so I would just change her tires as needed.
mcm44 is offline  
Old 09-09-19, 12:04 PM
  #2  
JanMM
rebmeM roineS
 
JanMM's Avatar
 
Join Date: Jan 2006
Location: Metro Indy, IN
Posts: 16,216

Bikes: Bacchetta Giro A20, RANS V-Rex, RANS Screamer

Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 653 Post(s)
Liked 347 Times in 226 Posts
Tubes are often labeled for use with a range of sizes. Find one with the range that includes 28 - 35 and the answer is yes.
https://express.google.com/u/0/produ...RoCp70QAvD_BwE
__________________
Bacchetta Giro A20, RANS V-Rex, RANS Screamer
JanMM is offline  
Old 09-09-19, 12:05 PM
  #3  
AnkleWork
Senior Member
 
Join Date: Jan 2013
Location: Llano Estacado
Posts: 3,702

Bikes: old clunker

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 684 Post(s)
Likes: 0
Liked 105 Times in 83 Posts
Originally Posted by mcm44
My question: is the tube size the same? If so I would just change her tires as needed.
Same as what? What size tube is in the tire now?
AnkleWork is offline  
Old 09-09-19, 12:37 PM
  #4  
Bill Kapaun
Really Old Senior Member
 
Bill Kapaun's Avatar
 
Join Date: Feb 2007
Location: Mid Willamette Valley, Orygun
Posts: 13,858

Bikes: 87 RockHopper,2008 Specialized Globe. Both upgraded to 9 speeds. 2019 Giant Explore E+3

Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1787 Post(s)
Liked 1,261 Times in 870 Posts
Your tubes should work fine.
However, since they are stretched "thinner", you have a bit less flat protection and faster air "seepage".
If these are "really old" tubes, they may not handle stretching so well.
Bill Kapaun is offline  
Old 09-09-19, 12:37 PM
  #5  
mcm44
Junior Member
Thread Starter
 
Join Date: Jul 2018
Posts: 18
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 3 Times in 1 Post
thanks for the replies and info
mcm44 is offline  
Old 09-09-19, 02:23 PM
  #6  
Metaluna
Senior Member
 
Join Date: Aug 2005
Location: New Hampshire
Posts: 1,221

Bikes: Niner RLT 9 RDO, Gunnar Sport, Soma Saga, Workswell WCBR-146

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 19 Times in 19 Posts
One complicating factor is that you need to find a tube that is not only in the desired width range, but also has a valve stem that is long enough for your rims (valve extenders are a suboptimal solution). Schwalbe SV17 and SV18 tubes have an exceptionally wide width range -- something like 28-42, and the SV17 is available with stems up to 60mm long, IIRC. They can be pricey though.
Metaluna is offline  
Old 09-09-19, 02:43 PM
  #7  
Leebo
Senior Member
 
Join Date: Aug 2009
Location: North of Boston
Posts: 5,721

Bikes: Kona Dawg, Surly 1x1, Karate Monkey, Rockhopper, Crosscheck , Burley Runabout,

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 854 Post(s)
Liked 111 Times in 66 Posts
Will the wider tires fit the frame?
Leebo is offline  
Old 09-12-19, 02:26 PM
  #8  
rumrunn6
Senior Member
 
rumrunn6's Avatar
 
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,546

Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0

Mentioned: 112 Post(s)
Tagged: 0 Thread(s)
Quoted: 5223 Post(s)
Liked 3,579 Times in 2,341 Posts
presta valves?

https://www.amazon.com/PACK-Tubes-PRESTA-Bicycle-Sunlite/dp/B011LMAM9E/ref=sr_1_8?keywords=Schrader+Valve+Tubes+700+x+28-35+48mm+stem&qid=1568319789&s=gateway&sr=8-8

that link shows choice of stem length


32mm schrader stems:

https://www.amazon.com/PACK-28-35-SCHRADER-Sunlite-Bicycles/dp/B00TP26MGK?source=ps-sl-shoppingads-lpcontext&psc=1

48mm schrader stems:

https://www.amazon.com/Kenda-28-32c-48mm-SCHRADER-Valve/dp/B002SQRV10/ref=asc_df_B002SQRV10/?tag=hyprod-20&linkCode=df0&hvadid=312094794461&hvpos=1o6&hvnetw=g&hvrand=11481567190829377065&hvpone=&hvptwo=&h vqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9001907&hvtargid=pla-568499102529&psc=1&tag=&ref=&adgrpid=62497261819&hvpone=&hvptwo=&hvadid=312094794461&hvpos=1o6&hvnet w=g&hvrand=11481567190829377065&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9001907&hvtargid=pla-568499102529

Last edited by rumrunn6; 09-12-19 at 02:31 PM.
rumrunn6 is offline  
Old 09-12-19, 08:22 PM
  #9  
cyccommute 
Mad bike riding scientist
 
cyccommute's Avatar
 
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,342

Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones

Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6200 Post(s)
Liked 4,204 Times in 2,358 Posts
Originally Posted by mcm44
Hi everyone
My wife's bike is 700c wheels and 28mm tires. I want to get a pair of 32mm or 35mm tires for her to swap for those 2 or 3 times a year we may want to ride in gravel trail paths.

My question: is the tube size the same? If so I would just change her tires as needed.
A 28 mm tube will fit in a 35mm tire quite easily. I wouldn’t worry too much about whether there is any change in flat protection or in air diffusion. The tube doesn’t provide all that much flat protection and the rate of diffusion may be higher but not by that much.

Frankly, I use 23mm tubes in 35 to 37mm tires on a regular basis. They are lighter and smaller in a bag.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!



cyccommute is offline  
Old 09-13-19, 12:06 PM
  #10  
Wilfred Laurier
Señor Member
 
Wilfred Laurier's Avatar
 
Join Date: Feb 2013
Posts: 5,066
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 649 Post(s)
Liked 292 Times in 215 Posts
I would get new tubes with the new tires, along with one spare tube.

Unless these are tires you are going to fold or coil up to carry along on a tour, you can leave the mostly-deflated tubes in the tires when they are removed and put them aside as a set. Then when you go to switch back, also leave the new tubes with the new tires.
Wilfred Laurier is offline  
Old 09-13-19, 02:41 PM
  #11  
Miele Man
Senior Member
 
Join Date: Jun 2014
Location: Ontario, Canada
Posts: 4,624

Bikes: iele Latina, Miele Suprema, Miele Uno LS, Miele Miele Beta, MMTB, Bianchi Model Unknown, Fiori Venezia, Fiori Napoli, VeloSport Adamas AX

Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1324 Post(s)
Liked 927 Times in 640 Posts
Originally Posted by cyccommute
A 28 mm tube will fit in a 35mm tire quite easily. I wouldn’t worry too much about whether there is any change in flat protection or in air diffusion. The tube doesn’t provide all that much flat protection and the rate of diffusion may be higher but not by that much.

Frankly, I use 23mm tubes in 35 to 37mm tires on a regular basis. They are lighter and smaller in a bag.
And more likely to split at a seam or at the valve. I've seen both happen with too small a tube in a tire. Best to use the right size tube in any tire.

Cheers
Miele Man is offline  
Old 09-15-19, 09:28 AM
  #12  
cyccommute 
Mad bike riding scientist
 
cyccommute's Avatar
 
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,342

Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones

Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6200 Post(s)
Liked 4,204 Times in 2,358 Posts
Originally Posted by Miele Man
And more likely to split at a seam or at the valve. I've seen both happen with too small a tube in a tire. Best to use the right size tube in any tire.

Cheers
In years of doing it, I’ve never seen either happen. A tube outside of a tire can be blown up to several times the diameter of the tube without risking “splitting a seam”. In a tire, a 23mm tube will only be increased in diameter by 12mm or about 1/2”.

Tubes, by the way, don’t have “seams”. The tubes are formed in a injection mold and are taken out as a single unit. The lines that might be seen as a “seam” are channels used in the mold to spread the injected rubber around the mold.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!



cyccommute is offline  
Old 09-15-19, 12:00 PM
  #13  
samkl 
Senior Member
 
Join Date: Feb 2017
Location: Chicago, IL
Posts: 518

Bikes: 2004 Trek 520, resto-modded 1987 Cannondale SR400, rando-modded 1976 AD Vent Noir; 2019 Wabi Classic; 1989? Burley Duet

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 213 Post(s)
Liked 93 Times in 51 Posts
You won't have a problem with a 28mm tube in a 32mm tire. Can't imagine you'd have a problem with a 35mm tire either, though I've never done it.

The idea of a 23mm tube in a 37mm tire freaks me out. Not saying it can't be done, but I'm not gonna try.
samkl is offline  
Old 09-15-19, 12:21 PM
  #14  
Sy Reene
Advocatus Diaboli
 
Sy Reene's Avatar
 
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,631

Bikes: Merlin Cyrene, Nashbar steel CX

Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4729 Post(s)
Liked 1,531 Times in 1,002 Posts
It is interesting to note that for some reason, while easy to find 20-25 or what not tires, the 28-37 tube availability is few and far between. Would seem a popular tube size for gravel riders.

Anyway.. these work well, but (as referred to) can only find from a UK seller

Conti Tour28 Slim 28-37
Sy Reene is offline  
Old 09-15-19, 02:15 PM
  #15  
AnkleWork
Senior Member
 
Join Date: Jan 2013
Location: Llano Estacado
Posts: 3,702

Bikes: old clunker

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 684 Post(s)
Likes: 0
Liked 105 Times in 83 Posts
Originally Posted by cyccommute
...
Tubes, by the way, don’t have “seams”. The tubes are formed in a injection mold and are taken out as a single unit. The lines that might be seen as a “seam” are channels used in the mold to spread the injected rubber around the mold.
Perfect BS.
See --https://www.youtube.com/watch?v=ZKPcSs5Rl7s about 2:17 and 3:15 (among many sources).
AnkleWork is offline  
Old 09-17-19, 05:52 PM
  #16  
cyccommute 
Mad bike riding scientist
 
cyccommute's Avatar
 
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,342

Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones

Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6200 Post(s)
Liked 4,204 Times in 2,358 Posts
Originally Posted by AnkleWork
Perfect BS.
See --https://www.youtube.com/watch?v=ZKPcSs5Rl7s about 2:17 and 3:15 (among many sources).
Okay, you learn something everyday. Thank you for the video...if not the way in which it was delivered. I was wrong in how I thought tubes are made.

That said, try and find the seam on a tube. Next try to tear it apart. The way that the seam is welded together, it is not particularly weak nor likely to tear. And, in my defense, most people have the idea that the channels on the outside of the tube are “seams” which they are not. The arrows in the picture point to mold channels, not seams.


Untitled by Stuart Black, on Flickr

Inside you can see that they are simply impression


Untitled by Stuart Black, on Flickr

Here’s the only seam on the tube from the outside and inside


Untitled by Stuart Black, on Flickr

Untitled by Stuart Black, on Flickr
Untitled by Stuart Black, on Flickr

Looking closely at the seam, it would take a whole lot more expansion to pull that seam apart than adding 0.5” to the diameter of the tube. There’s really nothing to pull the pieces of the tube apart.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!



cyccommute is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MAK
Touring
5
01-22-17 04:09 PM
RusticBohemian
Bicycle Mechanics
5
05-17-12 06:39 PM
spudston
Bicycle Mechanics
6
08-30-11 03:04 PM
xodiak
Bicycle Mechanics
8
06-16-11 08:12 PM
HillyBiker
Bicycle Mechanics
4
04-08-10 01:42 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.