Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Can I raise these handlebars?

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Can I raise these handlebars?

Old 10-09-19, 10:42 AM
  #1  
kingtinker
Newbie
Thread Starter
 
Join Date: Oct 2019
Posts: 2
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Can I raise these handlebars?

Hello all. I just bought this used Cannondale and I'd like to raise the handlebars around 1 or 2 inches to sit slightly more upright while riding. I'm a novice with bike mechanics but looking to learn. Looking at the pictures here can I raise the stem by adding spacers to the steerer tube (and where do I get the correct spacers?) or is this as high as the steerer tube will go (as I suspect because there's no more of it over the stem) meaning I need to buy a new tube/neck?

edit/ I'm not allowed to post images since I'm new, so I'm describing the image which seems ridiculous but I need answers! The stem attaches to the top of the steerer tube at the very top of the tube. There's no additional tube jutting up above where the stem connects. Does that mean that if I want to raise the handlebars I need a longer tube? Or could I buy an angled stem? Thanks.

If you care to see the image, I put it here: bit.ly (slash) 315xW1X
kingtinker is offline  
Old 10-09-19, 10:51 AM
  #2  
jadocs
Senior Member
 
jadocs's Avatar
 
Join Date: Jul 2018
Location: USA
Posts: 2,192

Bikes: Ti, Mn Cr Ni Mo Nb, Al, C

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 942 Post(s)
Liked 526 Times in 349 Posts
Originally Posted by kingtinker
Hello all. I just bought this used Cannondale and I'd like to raise the handlebars around 1 or 2 inches to sit slightly more upright while riding. I'm a novice with bike mechanics but looking to learn. Looking at the pictures here can I raise the stem by adding spacers to the steerer tube (and where do I get the correct spacers?) or is this as high as the steerer tube will go (as I suspect because there's no more of it over the stem) meaning I need to buy a new tube/neck?

edit/ I'm not allowed to post images since I'm new, so I'm describing the image which seems ridiculous but I need answers! The stem attaches to the top of the steerer tube at the very top of the tube. There's no additional tube jutting up above where the stem connects. Does that mean that if I want to raise the handlebars I need a longer tube? Or could I buy an angled stem? Thanks.

If you care to see the image, I put it here: bit.ly (slash) 315xW1X
No you can’t. You could try to find a stem with a steeper angle and raise it a bit that way.
jadocs is offline  
Old 10-09-19, 10:53 AM
  #3  
kingtinker
Newbie
Thread Starter
 
Join Date: Oct 2019
Posts: 2
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Thanks. Any tips on making sure I buy the right stem? Could I also just buy a longer tube?
kingtinker is offline  
Old 10-09-19, 10:56 AM
  #4  
le mans
Steel is real
 
le mans's Avatar
 
Join Date: Dec 2014
Location: Australia
Posts: 772

Bikes: Custom - Record Vortex 8 spd Nexus & Mistral Le Mans 3 spd Shimano. Giant Kronos. Raliegh Single Speed

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 157 Post(s)
Liked 17 Times in 14 Posts
To change the steerer tube you'd have to outlay for a whole fork


An angled up stem would be your cheapest solution, but IMO you lose something "the Look", maybe if it has the same profile as the top tube, that's if it slopes, similar angle... and if it's short it would look OK & a shorter stem would give you more of an upright sitting position too.

What year model is your Cannondale?

Last edited by le mans; 10-09-19 at 11:00 AM.
le mans is offline  
Old 10-09-19, 11:09 AM
  #5  
le mans
Steel is real
 
le mans's Avatar
 
Join Date: Dec 2014
Location: Australia
Posts: 772

Bikes: Custom - Record Vortex 8 spd Nexus & Mistral Le Mans 3 spd Shimano. Giant Kronos. Raliegh Single Speed

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 157 Post(s)
Liked 17 Times in 14 Posts
If this is a hybrid or a mountain bike you could simply obtain a bent up flatbar
le mans is offline  
Old 10-09-19, 11:12 AM
  #6  
le mans
Steel is real
 
le mans's Avatar
 
Join Date: Dec 2014
Location: Australia
Posts: 772

Bikes: Custom - Record Vortex 8 spd Nexus & Mistral Le Mans 3 spd Shimano. Giant Kronos. Raliegh Single Speed

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 157 Post(s)
Liked 17 Times in 14 Posts
ah.. it's a road bike
le mans is offline  
Old 10-09-19, 11:15 AM
  #7  
le mans
Steel is real
 
le mans's Avatar
 
Join Date: Dec 2014
Location: Australia
Posts: 772

Bikes: Custom - Record Vortex 8 spd Nexus & Mistral Le Mans 3 spd Shimano. Giant Kronos. Raliegh Single Speed

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 157 Post(s)
Liked 17 Times in 14 Posts
Looks like the stem was turned upside down for better height, not enough, Hey?
le mans is offline  
Old 10-09-19, 12:03 PM
  #8  
tyrion
Senior Member
 
tyrion's Avatar
 
Join Date: Oct 2015
Location: San Diego, California
Posts: 4,077

Bikes: Velo Orange Piolet

Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 2228 Post(s)
Liked 2,011 Times in 972 Posts
Originally Posted by kingtinker
Thanks. Any tips on making sure I buy the right stem? Could I also just buy a longer tube?
Most of the ones like this will fit your bike. Fits a 1-1/8" steerer tube (standard size) and 26mm handlebar with shims (pictured) or 31.8mm handlebar without the shims.



Search for "high rise stem".

They come in various lengths and angles, do the math to figure the length and angle to achieve the handlebar position you want.
tyrion is offline  
Old 10-09-19, 12:36 PM
  #9  
JoeTBM 
Droid on a mission
 
JoeTBM's Avatar
 
Join Date: May 2018
Location: Palm Coast, FL
Posts: 1,004

Bikes: Diamondback Wildwood Classic

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 316 Post(s)
Liked 276 Times in 191 Posts
Or you could try one of these. I just installed one on a friend's bike and he was very happy with the additional height.

https://www.ebay.com/itm/Mountain-Bi...72.m2749.l2649

__________________
JoeTBM (The Bike Man) - I'm a black & white type of guy, the only gray in my life is the hair on my head
www.TheBikeMenOfFlaglerCounty.com




JoeTBM is offline  
Old 10-09-19, 01:31 PM
  #10  
jlaw
Senior Member
 
Join Date: Mar 2018
Posts: 988

Bikes: 2015 Spec. AWOL Elite,2022 Spec. Diverge, 1984 Trek 620 1985 Trek 620, 1979 Trek 710

Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 394 Post(s)
Liked 194 Times in 110 Posts
Another possibility is keeping your current stem and using these bars, but they are pricey - $100

You gain about 2".

https://www.somafab.com/archives/pro...or-2-handlebar

jlaw is offline  
Likes For jlaw:
Old 10-09-19, 02:19 PM
  #11  
dsbrantjr
Senior Member
 
dsbrantjr's Avatar
 
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319

Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta

Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times in 723 Posts
Originally Posted by JoeTBM
Or you could try one of these. I just installed one on a friend's bike and he was very happy with the additional height.

https://www.ebay.com/itm/Mountain-Bi...72.m2749.l2649

With folks' concerns about the fragility of carbon (I don't use it, myself) someone may want to ring in abut the wisdom of putting an extender on a carbon steerer. Longer lever arm and all of that.
dsbrantjr is offline  
Old 10-11-19, 01:52 PM
  #12  
phughes
Senior Member
 
phughes's Avatar
 
Join Date: Mar 2011
Posts: 3,064
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1020 Post(s)
Liked 1,253 Times in 724 Posts
You can use this tool to compare different stems. It will show you how different length, and angles change the height and reach. Stem Comparison Tool | yojimg.net
phughes is offline  
Old 10-11-19, 02:18 PM
  #13  
sch
Senior Member
 
Join Date: May 2003
Location: Mountain Brook. AL
Posts: 4,002
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 303 Post(s)
Likes: 0
Liked 136 Times in 104 Posts
dsbrandt raises the ? of lever arm and how high one should risk mounting the bar above the top tube. IMO of the three options: high rise stem($10-100), new fork with
longer steering tube ($100-300) or JoeTBMs stemriser at $11, the stemriser makes most sense. I see little difference between a longer carbon steering tube and a stemriser
with respect to mechanical advantage stress on the fork. One could argue similarly about stems in the 14cm range putting stress on the steering tube as well. If you drill
down into the fork manufacturers lit some do mention limits on how tall the installed steering tube should be above the head tube. Sort of analogous to the max extension
put on seat posts, where admittedly the stress is a LOT higher.

You will have to rejigger your front brake cable/housing and possibly the RD/FD cables and housing as well when you do raise the bar however you do it.

Last edited by sch; 10-11-19 at 02:23 PM.
sch is offline  
Old 10-11-19, 02:55 PM
  #14  
CliffordK
Senior Member
 
CliffordK's Avatar
 
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,600
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18320 Post(s)
Liked 4,489 Times in 3,338 Posts
@kingtinker's Album:
https://www.bikeforums.net/g/user/507130
https://www.bikeforums.net/g/album/15451419


Can you post a full side view of the whole bike as adjusted for you to ride?

You already have quite a few spacers under those bars, and the stem flipped up. Make sure that the steer tube is within about 1/4" or so of the top of the stem, perhaps even closer. You don't want the stem barely hanging on there.

A number of MTB stems will give you a bit more rise, although perhaps heavier than the road stems.

However, my first question is what your overall bike fit is like.
CliffordK is offline  
Old 10-12-19, 01:30 AM
  #15  
cpach
Senior Member
 
Join Date: Oct 2009
Location: Mt Shasta, CA, USA
Posts: 2,140

Bikes: Too many. Giant Trance X 29, Surly Midnight Special get the most time.

Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 530 Post(s)
Liked 311 Times in 235 Posts
I'd strongly recommend replacing the stem rather than using a steerer extender-it's mechanically simpler, lighter, more sturdy, and looks way better.The stem calculator phughes linked to is very useful, but you should also have some idea of how actually the bike should fit. Keep in mind that generally speaking bringing reach back will also be more upright. The steerer on that bike is as long as it can be within spec, and for the majority of riders for whom that bike is appropriate both in fit and in intention, that should be plenty high, but human bodies vary etc so do what's right for your body. If you've ridden road bikes plenty do what you know is right for you, but if not consider trying out a lower position than you're accustomed to--a lot of people have a knee jerk reaction to a forward fit because they have a fear of putting weight over their front wheel more than anything else. Consider posting some photos/videos of you on the bike to the fit forum, or actually go see a fit specialist.
cpach is offline  
Likes For cpach:
Old 10-17-19, 03:42 PM
  #16  
Pridedog
Gone Biking!
 
Pridedog's Avatar
 
Join Date: Dec 2009
Location: Indiana
Posts: 150

Bikes: Orbea Gain, Lynskey, Redline Conquest Disc, Bike Friday, Cannnondale T2 Tandem.

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 42 Post(s)
Liked 50 Times in 28 Posts
Use angled stem

I recently had to raise my bars 1 1/2" after spinal fusion per my surgeons direction. The cheapest and easiest was a stem with a greater angle than 6 degrees. I used a 17 on one bike and a 25 on another. Did not have to replace fork and luckily had enough slack in cables that they could accommodate new height. Did have to adjust existing stem spacers.
Pridedog is offline  
Old 10-17-19, 06:28 PM
  #17  
jlaw
Senior Member
 
Join Date: Mar 2018
Posts: 988

Bikes: 2015 Spec. AWOL Elite,2022 Spec. Diverge, 1984 Trek 620 1985 Trek 620, 1979 Trek 710

Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 394 Post(s)
Liked 194 Times in 110 Posts
This website has a comparison tool that allows you to compare different stem length/rise combinations to your current set-up and each other. It shows the reach/rise of each set-up. Very useful.
Stem Comparison Tool | yojimg.net

I also have one of these adjustable stems on a bike - allowed me to dial-in the set-up that I wanted - or change positions during the season as I gain flexibility.
jlaw is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.