Notices
General Cycling Discussion Have a cycling related question or comment that doesn't fit in one of the other specialty forums? Drop on in and post in here! When possible, please select the forum above that most fits your post!

Converting Bike

Old 05-14-19, 11:16 AM
  #1  
DSL1970
Junior Member
Thread Starter
 
Join Date: Apr 2008
Posts: 15
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Converting Bike

Hi All,

I currently have a mountain bike which has the following wheels: Alex XD Elite double wall 29" - 32H, Pin Joint, Formula QR hubs.

I am not using this as a mountain bike and want to convert it into more of a commuter bike. I want to put slicks on it, but I don't know how narrow I can go considering it currently has 2.1 mountain bike tires.

Any advice?

Regards,

DSL1970
DSL1970 is offline  
Old 05-14-19, 11:33 AM
  #2  
Elvo
Senior Member
 
Join Date: Oct 2006
Location: Orange County, CA
Posts: 4,770
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 630 Post(s)
Likes: 0
Liked 369 Times in 206 Posts
It has 19mm inner and 25 mm outer. The narrowest I would run is 25mm but personally I would run at least 32mm

Elvo is offline  
Old 05-14-19, 11:37 AM
  #3  
Ironfish653
Dirty Heathen
 
Ironfish653's Avatar
 
Join Date: Oct 2015
Location: MC-778, 6250 fsw
Posts: 2,188

Bikes: 1997 Cannondale, 1976 Bridgestone, 1998 SoftRide, 1989 Klein, 1989 Black Lightning #0033

Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 889 Post(s)
Liked 906 Times in 534 Posts
29'er wheels are the same ERD as 700c road wheels, so '700c' road or hybrid tires would work.
ALEX list the rim as a 19mm width, so you could concievably go as small as a 28mm road tire.

I'd stick with something in the 35mm-38mm range, which should give you a faster tire, but still have enough volume to absorb bumps, debris, and the occasional curb-hop.

You may want to stay with a larger tire,but just a smooth tread like a Schwalbe Big Apple 2.1" I find that urban riding is a lot like fast trail work, and the big volume helps shake off obstacles and road hazards.
Ironfish653 is offline  
Old 05-14-19, 12:51 PM
  #4  
Aubergine 
Bad example
 
Join Date: Nov 2015
Location: Seattle and Reims
Posts: 2,925
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 775 Post(s)
Liked 24 Times in 20 Posts
I concur with the recommendations not to go too narrow. Look for a light flexible tire, and you should be pleasantly surprised at the improvement in ride.
__________________
Keeping Seattle’s bike shops in business since 1978
Aubergine is offline  
Old 05-14-19, 09:42 PM
  #5  
BobbyG
Senior Member
 
BobbyG's Avatar
 
Join Date: Jan 2009
Location: Colorado Springs, CO
Posts: 5,955

Bikes: 2015 Charge Plug, 2007 Dahon Boardwalk, 1997 Nishiki Blazer, 1984 Nishiki International, 2006 Felt F65, 1989 Dahon Getaway V

Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1357 Post(s)
Liked 1,655 Times in 819 Posts
My two cents...medium to flat slicks.

https://www.bikeforums.net/commuting...ig-bouncy.html
BobbyG is offline  
Old 05-15-19, 12:00 PM
  #6  
chas58
Senior Member
 
chas58's Avatar
 
Join Date: Jul 2010
Location: Michigan
Posts: 4,863

Bikes: too many of all kinds

Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 1147 Post(s)
Liked 415 Times in 335 Posts
Fatter tires tend to have lower rolling resistance and lower pressure.

I have some 60mm slicks that have similar rolling resistance (~10 watts) as my 23mm road race tires.

I've gone as low as ~40mm, but below that you are just dropping the bottom bracket real low and getting a stiff ride. Its not faster. I've used 25mm tires on my mountain bike, but it was just ugly and inefficient.

I would recommend some 45mm gravel tires (Panaracer or Schwalbe make some good ones).
chas58 is offline  
Old 05-16-19, 02:34 AM
  #7  
jideta
Senior Member
 
Join Date: Apr 2019
Location: Honolulu
Posts: 262
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 94 Post(s)
Liked 139 Times in 74 Posts
When I converted my 29er I ran 32mm Schwalbe Marathon Supremes. Seemed like a good compromise. 35mm still felt like knobbies to me. 28mm just didn't look right on my wheels.
jideta is offline  
Old 05-16-19, 06:30 AM
  #8  
Wilfred Laurier
Señor Member
 
Wilfred Laurier's Avatar
 
Join Date: Feb 2013
Posts: 5,064
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 648 Post(s)
Liked 290 Times in 214 Posts
All great advice here.

You wheels will be able to safely handle 700X28 or so tires without any issue. You get to choose the model of tire and the width. Think about the roads and trails you will be riding on - are they rough and potholed or smooth and newly paved? If smooth you can easily get tires on the narrow end of the scale, which will make your bike a bit lighter and the higher pressures will make for a livelier ride. If the roads are rough or potholed, fatter tires will still roll nice and fast but can be run at lower pressure to soften the ride and still prevent pinch flats and rim damage. Is this in an area with lots of debris and possible flat-tire-causers? Then choose flat-resistant tires like Schwalbe GreenGuard or Specialized Flak Jacket (every manufacturer calls their flat protection something different, but all do essentially the same thing). If you are less concerned about punctures you could opt for less robust tires, which will tend to feel lighter and will roll a bit easier (not so easy that it makes up for having to stop to fix a flat, though).

If I were you I would start with some 700X45 or 700x50 (approx. 2" wide) tires - something like this: https://www.schwalbetires.com/bike_t...big_apple_plus

The great thing about tires is that they are a wear item, so if you decide the tires you have aren't ideal, you can be motivated to ride more to wear them out so you have a reason to change them!
Wilfred Laurier is offline  
Old 05-18-19, 08:44 PM
  #9  
zjrog
Senior Member
 
Join Date: Jul 2009
Posts: 1,753

Bikes: 1986 KHS Fiero, 1989 Trek 950, 1990 Trek 7000, 1991 Gary Fisher Hoo Koo E Koo, 1992 Trek 1400, 1997 Cannondale CAD2 R300, 1998 Cannondale CAD2 R200, 2002 Marin San Rafael, 2006 Cannondale CAAD8 R1000, 2010 Performance Access XCL9R

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 284 Post(s)
Liked 385 Times in 207 Posts
I'm in a similar position, looking to switch to narrower tires for my 29er. Currently has Kenda SmallBlock 8 front and Slant Six rear 700x54. While my Performance Access XCL 9r has plenty of room for wider, I really don't ride offroad enough to warrant knobbies. But I do want some reasonable gravel tires, rather than slicks. Thinking 32 to 42 is a good size. I have been tubeless with the current set up, but went tubed after the bike sat for a couple years. Just haven't pulled that trigger with other bikes needing attention. First world, N+1 problems...
zjrog is offline  
Old 05-19-19, 06:42 AM
  #10  
bcpriess
Senior Member
 
Join Date: Oct 2016
Posts: 289

Bikes: Masi Giramondo, Trek 830 monstercross build, Raleigh Gran Sport, Lemond Tourmalet

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 121 Post(s)
Likes: 0
Liked 19 Times in 12 Posts
Get the fattest, lowish resistance tires you can get. , On my drop bar trek 830 mtb i run a 26x1.9 riddler in the back and a 26x1.95 fasttrak in front for an 11 mile commute and it can handle all the irregular surfaces and curb hopping required to make the trip.
bcpriess is offline  
Old 05-19-19, 07:20 AM
  #11  
FlMTNdude
Senior Member
 
Join Date: Mar 2017
Location: Williston FL
Posts: 531

Bikes: 1988 Panasonic, 1989 Fuji, Schwinn Beach Cruiser

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 115 Post(s)
Liked 60 Times in 45 Posts
If you are commuting you don’t want or even need too skinny a tire, especially on a mtb. I would look at 32-35 mm width, and something with some tread and built in flat protection. Plenty of faster tires which are not slicks. Maybe even a tire liner in the tire. I would get all kinds of flats from radial tire wires before my Mr Tuffy liners, bear in mind I am running all road gear.
Figuring your gear for commuting is a learning experience and trial and error. Look at the commuting forum, a lot is there to help you figure it out. People there are riding anything from fixies to mountain to full on road bikes. I have commuted steadily now for a year and a half, off and on for 6 years prior to that. Enjoy!
FlMTNdude is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jamesbowers
General Cycling Discussion
15
06-07-19 09:42 AM
Isaacchencool
General Cycling Discussion
17
11-28-17 10:05 PM
DrCool
General Cycling Discussion
13
10-03-14 09:43 AM
blargman
Road Cycling
12
06-23-12 03:38 PM
rick458
Bicycle Mechanics
3
04-14-11 07:41 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.