Reynolds 531 Gitane Tandem
#1
Junior Member
Thread Starter
Join Date: Nov 2015
Location: Sacramento, CA
Posts: 13
Bikes: 50s French Mystery Somethinorother, ‘78 Jack Taylor Tourist, ‘89 Specialized RockCombo, ‘51 Raleigh Clubman, '83 Raleigh Tourist, ‘84 Mongoose ATB, ‘78 Gitane Tandem
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Liked 20 Times
in
3 Posts
Reynolds 531 Gitane Tandem
I’m looking to find out about a Gitane tandem I just bought. I see over on the GitaneUSA forum that the Gitane and French Reynolds decals likely put it c. 1973-1976. Unlike most of the other Gitane tandems im seeing online, this one is made from Reynolds 531, has Campagnolo dropouts, is not step through or mixte in the rear, has an eccentric bottom bracket, and is built for 27in wheels. The parts are a bit of a mixture, likely with some changes in the 1980s. Has full TA 50.4 bcd tandem crankset, Mafac cantilever and levers, Suntour alpha 3000 rear derailleur, Campagnolo somethinerother front derailleur, Cinelli stem and drop bars in front, SR bars in rear, SR Laprade seatposts. No drum brake but cable stops and fittings for one. A brief perusal of catalogs includes the intriguing mention in 1969 of Gitane farming out specialty tandems to Alex Singer; from the looks of others I’ve seen it doesn’t have the signature fork of a Follis built one. I’ll post pictures once I meet my forum quota, but there is one with similar bones to it up on eBay right now. Any thoughts, opinions, knowledge, and pontification is welcomed.
#2
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,547
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18349 Post(s)
Liked 4,502 Times
in
3,346 Posts
@Arbutus's album/gallery.
https://www.bikeforums.net/g/user/426347
https://www.bikeforums.net/g/album/13140025
https://www.bikeforums.net/g/user/426347
https://www.bikeforums.net/g/album/13140025
Last edited by CliffordK; 03-11-19 at 03:59 PM.
Likes For CliffordK:
#3
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,547
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18349 Post(s)
Liked 4,502 Times
in
3,346 Posts
Pretty neat bike.
It looks like it could use a little work on the brakes.
I'm surprised about the seat clamp slot design.
It looks like it could use a little work on the brakes.
I'm surprised about the seat clamp slot design.
#4
Senior Member
Join Date: Sep 2008
Location: NE Tennessee
Posts: 917
Bikes: Giant TCR/Surly Karate Monkey/Foundry FireTower/Curtlo Tandem
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 169 Post(s)
Liked 84 Times
in
62 Posts
Very neat looking frame. I could have a lot of fun with that as a project.
#5
Junior Member
Thread Starter
Join Date: Nov 2015
Location: Sacramento, CA
Posts: 13
Bikes: 50s French Mystery Somethinorother, ‘78 Jack Taylor Tourist, ‘89 Specialized RockCombo, ‘51 Raleigh Clubman, '83 Raleigh Tourist, ‘84 Mongoose ATB, ‘78 Gitane Tandem
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Liked 20 Times
in
3 Posts
As I’m new to all things tandem-related, what do you find unusual about the pilot seat post clamp?
#6
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,547
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18349 Post(s)
Liked 4,502 Times
in
3,346 Posts
Thanks for posting the photos! Luckily, the brake shoes, with new salmon Mafac style pads, came with. They’ll be going on as these saddles come off. Can’t wait to just get this thing base line rideable to try it out.
As I’m new to all things tandem-related, what do you find unusual about the pilot seat post clamp?
I'd double check seatpost sizes.
I've got one of the Gitane Mixte tandems (I haven't needed to ride it), which would have a different design, and no need for that bolt arrangement.
#7
Junior Member
Thread Starter
Join Date: Nov 2015
Location: Sacramento, CA
Posts: 13
Bikes: 50s French Mystery Somethinorother, ‘78 Jack Taylor Tourist, ‘89 Specialized RockCombo, ‘51 Raleigh Clubman, '83 Raleigh Tourist, ‘84 Mongoose ATB, ‘78 Gitane Tandem
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Liked 20 Times
in
3 Posts
I started taking it all apart to clean and grease it only to find that the Cinelli quill stem was stuck with galvanic corrosion. Some time with a hacksaw, drain cleaner with lye, and a pair of vise grip pliers finally did the trick. Photos to come once I earn said forum privileges.
#8
my nice bike is at home
Front dérailleur is early Campy Super Record. nice looking Tandem.
__________________
BMC Race Machine / BMC Team Machine / Rossin Record / 80's Pinarello Traviso / Merlin MTB / Raleigh "Folding 20" / Ti-Swift (!)
Erikson w/C&C couplers / Trek's: 2300, 1200, 990 / Jamis 'Sputnik'
BMC Race Machine / BMC Team Machine / Rossin Record / 80's Pinarello Traviso / Merlin MTB / Raleigh "Folding 20" / Ti-Swift (!)
Erikson w/C&C couplers / Trek's: 2300, 1200, 990 / Jamis 'Sputnik'
#9
Full Member
Join Date: May 2009
Location: WI
Posts: 262
Bikes: 2010 Bob Brown Cycles tandem, 2019 Co-Mo Carrera tandem, 1980 Richardson tandem, 2014 Cervelo R3, 2018 Specialized Roubaix, 1985 Bianchi Campione, 1983 Trek 720, 2020 Trek Fuel EX8, 2021 Salsa Mukluk
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 72 Post(s)
Liked 116 Times
in
70 Posts
Pretty cool bike! I love seeing these old tandems! It reminds me of the days when we first started tandeming.
And hey.....welcome to the forum!
And hey.....welcome to the forum!
#10
Senior Member
Join Date: Jun 2018
Posts: 69
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 29 Post(s)
Likes: 0
Liked 58 Times
in
18 Posts
We rode a version of that frame from 1973 to 1975, only with Mixte in the rear. We rode it a lot before we replaced it a Bob Jackson tandem. I hope your frame is stiffer than ours was. We used to call it the "articulating bike" because the frame would flex so much when we stood. Like yours, our frame had Mafac cantilever brakes and came with 27" wheels. We were able to adjust the brakes so that we could ride on sew-up rims, which have the same effective diameter as a 700c rim.
#11
Junior Member
Thread Starter
Join Date: Nov 2015
Location: Sacramento, CA
Posts: 13
Bikes: 50s French Mystery Somethinorother, ‘78 Jack Taylor Tourist, ‘89 Specialized RockCombo, ‘51 Raleigh Clubman, '83 Raleigh Tourist, ‘84 Mongoose ATB, ‘78 Gitane Tandem
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Liked 20 Times
in
3 Posts
Another big thank you to everyone who commented on this thread. I’m happy to report that the tandem is a joy to ride for my wife as captain and for me as stoker. I had to kill the seized stem to get it operational, but it’s happier for it. Next big challenge is getting an Arai drag brake to work on it. Time to start scouring the tandem forum for info!
#12
pan y agua
Join Date: Aug 2005
Location: Jacksonville
Posts: 31,294
Bikes: Willier Zero 7; Merlin Extralight; Calfee Dragonfly tandem, Calfee Adventure tandem; Cervelo P2; Motebecane Ti Fly 29er; Motebecanne Phantom Cross; Schwinn Paramount Track bike
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 1441 Post(s)
Liked 710 Times
in
364 Posts
We rode a version of that frame from 1973 to 1975, only with Mixte in the rear. We rode it a lot before we replaced it a Bob Jackson tandem. I hope your frame is stiffer than ours was. We used to call it the "articulating bike" because the frame would flex so much when we stood. Like yours, our frame had Mafac cantilever brakes and came with 27" wheels. We were able to adjust the brakes so that we could ride on sew-up rims, which have the same effective diameter as a 700c rim.
I was going to say that the bike is likely very flexy, and not to give up on riding tandems if you find this bike to be uncomfortably flexy.
For a light team that doesn’t ride aggressively, you may find this bike perfectly acceptable. If you’re bigger, or like to hammer, it will likely ride like a wet noodle.
Personally, I think your bike is a cool project, interesting as a vintage bike, and something fun to play with. If you really get into tandems I’d consider trading up to a newer used tandem like a Trek, or Canondale before I put any money into the Gitane
#13
Junior Member
I was going to say that the bike is likely very flexy, and not to give up on riding tandems if you find this bike to be uncomfortably flexy.
For a light team that doesn’t ride aggressively, you may find this bike perfectly acceptable. If you’re bigger, or like to hammer, it will likely ride like a wet noodle.
Personally, I think your bike is a cool project, interesting as a vintage bike, and something fun to play with. If you really get into tandems I’d consider trading up to a newer used tandem like a Trek, or Canondale before I put any money into the Gitane
For a light team that doesn’t ride aggressively, you may find this bike perfectly acceptable. If you’re bigger, or like to hammer, it will likely ride like a wet noodle.
Personally, I think your bike is a cool project, interesting as a vintage bike, and something fun to play with. If you really get into tandems I’d consider trading up to a newer used tandem like a Trek, or Canondale before I put any money into the Gitane
#14
Junior Member
Thread Starter
Join Date: Nov 2015
Location: Sacramento, CA
Posts: 13
Bikes: 50s French Mystery Somethinorother, ‘78 Jack Taylor Tourist, ‘89 Specialized RockCombo, ‘51 Raleigh Clubman, '83 Raleigh Tourist, ‘84 Mongoose ATB, ‘78 Gitane Tandem
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Liked 20 Times
in
3 Posts
It’s been a while, but here are a few shots of the current state of the Gitane. It’s been a real joy for us to ride.
Likes For Arbutus:
#17
sc*l*tor*
Love it, I have seen a very few Gitane tandems stateside that were built to this higher standard, have always felt the Follis connection covered the standard tandem build and/or the diagonal framestays (with their signature swaged ends) indicated Nantes. Did I say I love what you have done with yours? My gosh how is the ride?