Wheel Manufacturer
#3
Expired Member
Join Date: Jun 2007
Location: TN
Posts: 11,535
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3670 Post(s)
Liked 5,422 Times
in
2,756 Posts
That's an Alex rim. You'll also need to post a pic of the hubs to ID them. Edit- I see you've started several threads about this wheelset. Why not ask a mod to consolidate them, you'll get better help.
Last edited by shelbyfv; 07-13-20 at 06:54 AM.
#5
Dont fix whats not broken
Join Date: Sep 2019
Location: Mooresville, NC
Posts: 302
Bikes: Steelman Stage Race, Dura-Ace 9s
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 95 Post(s)
Liked 166 Times
in
93 Posts
If only a slight wobble, likely just out of true (vs. a bent rim). Easy fix with a spoke wrench if you'd like to take a DIY shot at it, otherwise it's a quick job at a bike shop once you clear the service queue.
#6
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,073
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4201 Post(s)
Liked 3,857 Times
in
2,305 Posts
There's two common meanings of wobble.
First is the axle bearings are "loose" so that the rim/spokes can rock back and forth. Often from poorly adjusted bearing preload or worn bearing surfaces. Depending on the actual cause might be fixable with simple adjustments or part replacements.
Second is a rim that when spun, and an indicator (like brake pads) is placed next to the rim, will seem to snake closer and further from the indicator, as in out of true. Depending on the condition of the rim and spokes this is generally addressed by adjusting the spoke tensions to pull and push portions of the rim to become more consistent a distance from that indicator. This is called truing the wheel.
So which is happening? Andy
First is the axle bearings are "loose" so that the rim/spokes can rock back and forth. Often from poorly adjusted bearing preload or worn bearing surfaces. Depending on the actual cause might be fixable with simple adjustments or part replacements.
Second is a rim that when spun, and an indicator (like brake pads) is placed next to the rim, will seem to snake closer and further from the indicator, as in out of true. Depending on the condition of the rim and spokes this is generally addressed by adjusting the spoke tensions to pull and push portions of the rim to become more consistent a distance from that indicator. This is called truing the wheel.
So which is happening? Andy
__________________
AndrewRStewart
AndrewRStewart
#7
Senior Member
Thread Starter
Join Date: Jul 2018
Location: Hoschton GA
Posts: 94
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
In my unprofessional option it is rideable, because I did ride it back to my car with zero issues. I got no mechanical know how, and I have got an appointment with the mechanic tomorrow at 11am to be exact. Cost me $17 dollars; don't know if that is to much or what?
#8
The dropped
Join Date: Oct 2018
Location: Columbus, OH
Posts: 2,144
Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules (sold) : 1966 Schwinn Deluxe Racer (sold)
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1739 Post(s)
Liked 1,014 Times
in
696 Posts
Not too much. The price tells me the mechanic will get the spoke wrench out, adjust the spoke nipples and hand the wheel back to you.
#9
Senior Member
Join Date: Oct 2009
Location: Sherwood, OR
Posts: 1,279
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 336 Post(s)
Liked 309 Times
in
180 Posts
If the $17 includes a quick fix (Wheel true or bearing adjust) then you are getting a very fair price, especially if the work is done while you wait.
#10
Banned
#11
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,985
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6193 Post(s)
Liked 4,808 Times
in
3,316 Posts
17 dollars and you take it to them is a decent price. 17 dollars and the mechanic is coming to you, I'd tip pretty heavy. Regardless, sometimes there is a little more to it than just tightening a few spokes. So if it's so far out of wack that all the spokes have to be relieved and re-tensioned, then expect a little more.
And still, there are other thing like bearing adjustment and other stuff that might also need to be looked at too. Some times one problem causes another. And another.......
And still, there are other thing like bearing adjustment and other stuff that might also need to be looked at too. Some times one problem causes another. And another.......
#12
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,806
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1943 Post(s)
Liked 2,164 Times
in
1,323 Posts
When I was a teenager I had no patience to work on cars. My Dad would lay out all his tools and methodically show me what to do. More than a half hour was too much for me.
My Dad would always tell me that I better get a good job to pay someone else do your work. As I grew older the patience showed up and I took the time to learn how to do things. My only regret was my Dad wasn’t around to see me swap out an engine and trans in a ‘63 Falcon Sprint. And I was fortunate to find a good job along the way.
John